Multi Objective Optimization
Mostrando 1-12 de 80 artigos, teses e dissertações.
-
1. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
2. Study using a CFD approach of the efficiency of a roof ventilation closure system in a multi-tunnel greenhouse for nighttime microclimate optimization
ABSTRACT The thermal efficiency of naturally ventilated greenhouses is limited due to the permanent exchange of air through the vents, especially during the night hours. The objective of the work consisted in evaluating a system of inflatable air ducts that close the roof vents during the night as a strategy to reduce the energy loss during these hours. For
Rev. Ceres. Publicado em: 2020-10
-
3. Direct sequencing of blocks in stochastic models with multi-mines and multi-destinations
Abstract Mining Scheduling is the one that maximizes profit from mining over time. By means of computational methods, the deposit is discretized in blocks and algorithms are used to consummate this objective. The methods that are widely known nowadays for mining scheduling optimization of a discrete block model were based on graph theory, and among those mos
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
4. Design and Analysis of Flexible Hinge Used for Unfolding Spacecraft Solar Panels
ABSTRACT: Two stiffness models for a flexible hinge with large rotation angle are established based on the pseudo-rigid body method and the series or parallel relationship of flexible units. Finite element simulation of the flexible hinge is conducted in ANSYS to verify the two stiffness models of the flexible hinge. A multi-objective optimization method is
J. Aerosp. Technol. Manag.. Publicado em: 18/07/2019
-
5. RELIABILITY-BASED MULTI-OBJECTIVE OPTIMIZATION APPLIED TO CHEMICAL ENGINEERING DESIGN
ABSTRACT Chemical engineering optimization represents a significant challenge due to the complexity of the mathematical models that are frequently required in this area. These models are normally associated with nonlinear equations that represent mass, energy, and momentum balances, which are submitted to physical, constitutive, environmental, and design lim
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
6. Optimal Simulation of the Land-Use Structure Based on the Local Ecological Environment: the Case of Huanghua City in Hebei Province, China
ABSTRACT The overuse of land has resulted in a sharp decline in ecological functions, affecting the environment as it relates to the existence and sustainable development of the whole biosphere. This work aims to evaluate the ecological and economic efficiencies of the land-use structure. A simulation model, CLUE-S (Conversion of Land-Use and its Effects at
Rev. Bras. Ciênc. Solo. Publicado em: 15/04/2019
-
7. Statistics of the Pareto front in Multi-objective Optimization under Uncertainties
Abstract In this paper we address an innovative approach to determine the mean and a confidence interval for a set of objects analogous to curves and surfaces. The approach is based on the determination of the most representative member of the family by minimizing a Hausdorff distance. This method is applied to the analysis of uncertain Pareto frontiers in m
Lat. Am. j. solids struct.. Publicado em: 14/11/2018
-
8. Optimization of Multiple Performance Characteristics of Friction Stir Welded Joint with Grey Relational Analysis
In the present work, multi-objective optimization of the input welding parameters influencing the quality of weld joint of AA 5052 H32 aluminium alloy by FSW process is investigated using response surface methodology and grey relational analysis. The quality of the welded joint is measured based on the higher value of tensile strength and hardness of the joi
Mat. Res.. Publicado em: 08/11/2018
-
9. Multi-objective optimization with Kriging surrogates using “moko”, an open source package
Abstract Many modern real-world designs rely on the optimization of multiple competing goals. For example, most components designed for the aerospace industry must meet some conflicting expectations. In such applications, low weight, low cost, high reliability, and easy manufacturability are desirable. In some cases, bounds for these requirements are not cle
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
10. Análisis comparativo de dientes de rastrillo giratorio para uso agrícola
ABSTRACT This study is aligned with the objective of the research project to support small business in the development of regional components. It is presented an analysis case performed as assistance to a producer in search of optimization in the quality of his line of agricultural use. The study applicant needs to find a root cause of the difference in in-s
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Crashworthiness Optimization of Nested and Concentric Circular Tubes Using Response Surface Methodology and Genetic Algorithm
Abstract In this study crashworthiness optimization of nested and concentric circular tubes under impact loading is performed by coupling Finite Element model, Response Surface Models and Genetic Algorithm. Specific Energy Absorption (SEA) and Crash Force Efficiency (CFE) are used in crashworthiness optimization since these criteria are important indicators
Lat. Am. j. solids struct.. Publicado em: 14/06/2018
-
12. Multi-objective Optimization Method For Repeat Ground-track Orbit Design Considering the Orbit Injection Error
ABSTRACT: Considering the adverse effects of orbit injection error, a novel repeat ground-track orbit redesign approach is proposed to reduce the fuel consumption caused by the orbital maneuvering from the injection orbit to the nominal orbit. By introducing the performance indexes of revisiting accuracy and orbit injection maneuvering fuel consumption, the
J. Aerosp. Technol. Manag.. Publicado em: 07/06/2018