Mortar Strength
Mostrando 1-12 de 111 artigos, teses e dissertações.
-
1. Methodology for evaluation of the influence of roughness and capillary absorption of ceramic blocks on the render’s tensile bond strength
Abstract The literature indicates that it is difficult or even impossible to associate with strong statistical confidence the bond strength of a mortar coating with the properties of the ceramic block, such as roughness and water absorption. In this work, it is assumed that the variability in capillary water absorption and roughness, and the use of methods t
Cerâmica. Publicado em: 2022
-
2. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
3. Evaluation of the use of blast furnace slag as an additive in mortars
Abstract Clinker is the raw material used in the manufacture of cement. However, this material is very harmful to the environment, since it is estimated that for every ton of clinker produced, about 1.0 ton of CO2 is released into the atmosphere. For this reason, alternatives were sought for the use of other materials that are less harmful to the environment
REM - International Engineering Journal. Publicado em: 2022
-
4. Effects of the addition of graphene on the compressive strength of geopolymeric mortar developed from k-feldspar mining waste
Abstract Contemporary organizations are showing a growing interest in the reuse of solid waste from industrial processes with the intention of reducing environmental impacts and reducing costs. The mining activity is one of the main waste generators in Brazil. In parallel, geopolymeric materials have been gaining prominence in studies that make it a possible
REM, Int. Eng. J.. Publicado em: 2021-09
-
5. Ternary system Portland cement-calcium aluminate cement-calcium sulfate applied to self-leveling mortar: a literature review
Abstract The modernization of building systems is increasingly demanding products that improve efficiency during their processing. The development of self-leveling mortars for the regularization of flooring is a consequence of this evolution. The high contents of binder and water to obtain self-flowing property, plus the application of thin layers over large
Cerâmica. Publicado em: 2021-03
-
6. Evaluation of mortars produced with Baosteel slag short flow (BSSF) steel slag as fine aggregate
Abstract The objective was to evaluate the influence of Baosteel slag short flow (BSSF) steel slag, a byproduct of a Brazilian steel mill, as a fine aggregate on the properties of fresh state and on the compressive strength of mortars. The experimental work was to characterize the BSSF steel slag and to produce simple mortars (only cement) and mixed mortars
Cerâmica. Publicado em: 2021-03
-
7. Stabilized mortar with air incorporator agent and plasticizer set retarder: performance measurement
Resumo Este estudo tem como objetivo desenvolver três argamassas estabilizadas para alvenaria com aditivo incorporador de ar e plastificante retardador de pega para comparar com uma argamassa convencional com cal. Foi analisado o índice de consistência, a massa específica, o teor de ar incorporado, a retenção da água, o tempo de pega através do calor
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
8. Bond strength evaluation between textiles reinforced mortar with carbon nanotubes and concrete substrate
Abstract The influence of using carbon nanotubes to improve bond strength between textiles reinforced mortar and concrete was investigated. Forty-two specimens were tested using double-shear test to evaluate the effect of various parameters such as CNTs addition, type of textile material, bond length and width, and number of TRM layers on the bond behavior.
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
9. Mechanical behavior and durability of mortars with quartzite and Portland cement after sulfate attack
RESUMO Os resíduos de rochas ornamentais, especialmente quartzito, causam grande impacto ambiental. Mais impulso tem sido dado à pesquisa sobre a reciclagem desses resíduos nos últimos anos, particularmente para uso como agregados em concreto e argamassa. No entanto, os estudos realizados até o momento não mencionam o comportamento da argamassa mistura
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Avaliação do comportamento de estanqueidade à água de argamassas e hidrorrepelentes – Parte II
RESUMO Além da função estética, os revestimentos de fachada protegem as edificações da penetração de água e, consequentemente, diminuem a propensão ao surgimento de manifestações patológicas que levariam à degradação da superfície. Este trabalho apresenta os ensaios de avaliação do comportamento de estanqueidade à água de revestimentos a
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Estudo de caso do desempenho de estanqueidade à água de argamassas e hidrorrepelentes - Parte I
RESUMO Um dos agentes desencadeadores de manifestações patológicas em edificações é o ingresso de fluídos e sais em fachadas degradadas pela ausência de manutenção ao longo de sua vida útil. O presente estudo avalia o desempenho de estanqueidade à água de oito revestimentos argamassados, sendo dois dosados em obra e seis industrializados, e de q
Matéria (Rio J.). Publicado em: 25/11/2019
-
12. Statistical analysis of mechanical properties of mortars with fly ash and waste tire rubber
Resumo Este artigo tem como objetivo efetuar a análise estatística dos efeitos da inclusão da borracha de pneus inservíveis e cinza volante oriunda de usinas termelétricas como componentes da argamassa para revestimento de edificações. Foram produzidas argamassas de referência e argamassas contendo borracha com dimensão máxima dos grãos de 0,71 mm
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019