Monolithic
Mostrando 1-12 de 102 artigos, teses e dissertações.
-
1. CONSTRUÇÃO DE MINI FORNO PARA FUNCIONALIZAÇÃO TÉRMICA DE FASES ESTACIONÁRIAS MONOLÍTICAS
The present work describes a mini oven built to be applied in the preparation of monolithic stationary phase through the thermal polymerization approach. The developed device was successfully tested for functionalization of monolithic stationary phase in the internal surface of the silica capillary column fused with gold nanoparticles.
Quím. Nova. Publicado em: 2020-03
-
2. Analysis of enamel and material wear by digital microscope: an in-vitro study
Abstract: The objective of the study was to analyze the surface area (SA) of the wear caused by simulated chewing on human enamel and opposing restorative material, namely: composite resin (CR), porcelain fused to metal (PFM), lithium disilicate (LD), or monolithic zirconia (MZr). Forty-eight premolars were selected as enamel specimens and divided randomly i
Braz. oral res.. Publicado em: 10/01/2020
-
3. Synthesis of Hybrid Monolithic Columns Using a Click Chemistry Reaction for Application in Capillary Liquid Chromatography
Hybrid monolithic columns present characteristics of both silica and organic monoliths, such as good mechanical properties, wide pH tolerance, high permeability and stability and little swelling or shrinkage. A common way to prepare this type of material is by using alkoxysilanes and organic monomers via the sol-gel process and click chemistry reactions. In
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
4. ADOLESCÊNCIA EM DEBATE: CONTRIBUIÇÕES TEÓRICAS À LUZ DA PERSPECTIVA HISTÓRICO-CULTURAL
RESUMO. Nos estudos sobre adolescência, percebemos que, cada vez mais, a psicologia tem sido convocada a dar respostas a questões inerentes a esta fase específica do desenvolvimento. A perspectiva histórico-cultural, proposta por Lev Semenovich Vigotski e seus seguidores, tem se apresentado enquanto importante abordagem teórica para a compreensão do hu
Psicol. Estud.. Publicado em: 14/10/2019
-
5. Restorative Possibilities Using Zirconia Ceramics for Single Crowns
Resumo Dois casos clínicos são apresentados para explorar as diferenças técnicas e discutir as vantagens e desvantagens de se utilizar zircônia com cerâmica estratificada ou monolítica para confeccionar coroas unitárias. O primeiro caso descreve os passos clínicos na confecção de uma coroa monolítica no segundo pré-molar esquerdo utilizando uma
Braz. Dent. J.. Publicado em: 07/10/2019
-
6. Fracture Load and Failure Mode of CAD-on Ceramic Structures
Resumo Este estudo avaliou a carga de fratura (Cf) e o modo de falha de estruturas cerâmicas fabricadas pela técnica CAD-on (Ivoclar Vivadent), testando as hipóteses de que a Cf das estruturas multicamadas é governada pela resistência da cerâmica de cobertura e o lascamento é mais frequente nas estruturas em multicamadas do que em monolíticas. Corpos
Braz. Dent. J.. Publicado em: 22/07/2019
-
7. Fatigue survival and damage modes of lithium disilicate and resin nanoceramic crowns
Abstract Polymer-based composite materials have been proposed as an alternative for single unit restorations, due to their resilient and shock absorbing behavior, in contrast to the brittleness of ceramic materials that could result in failure by fracture. Objective: To evaluate the fatigue strength and damage modes of monolithic posterior resin nanoceramic
J. Appl. Oral Sci.. Publicado em: 30/05/2019
-
8. Corrosion Investigation of Stir Cast Zn-27Al Based Hybrid Composites Reinforced with Quarry Dust and Silicon Carbide Particles
This paper investigates the corrosion behaviour of Zn-27Al based hybrid composites reinforced with quarry dust (QD) and silicon carbide particles (SiCp). The Zn-27Al hybrid composites containing 8 wt% and 10 wt% SiCp-QD particles reinforcement with varied weight percentage of 0, 25, 50, 75 and 100% quarry dust respectively were synthesized using stir casting
Mat. Res.. Publicado em: 13/05/2019
-
9. Development and evaluation of multiparticulate biphasic system for the treatment of circadian diseases
Multiparticulate systems have biopharmaceutical advantages when compared to the monolithic systems, once they allow different patterns of drug release and can be used in different treatments. The aim of the present work was to develop a biphasic controlled release delivery system, using propranolol hydrochloride (PROP) that can be used for the treatment of c
Braz. J. Pharm. Sci.. Publicado em: 08/04/2019
-
10. Semi-solid Sintering of Ti6Al4V/CoCrMo Composites for Biomedical Applications
A composite of Ti6Al4V reinforced with CoCrMo particles is fabricated by conventional powder metallurgy and semi-solid sintering. Composites are fabricated by mixing 20% wt. of CoCrMo reinforcing particles into the Ti6Al4V matrix. Sintering is studied by dilatometry tests between 1050 and 1130 °C and compact characterization is performed by SEM and XRD. Mic
Mat. Res.. Publicado em: 31/01/2019
-
11. Damage index analysis of prefabricated segmental bridge columns under cyclic loading
Abstract The damage index is usually applied to evaluate the damage states of bridge structures, which is the basis of structural fragility study. The present study investigates the seismic damage index of the prefabricated segmental bridge columns (PSBC) under cyclic loading by theoretical and numerical analysis. Based on the previous pseudo-static experime
Lat. Am. j. solids struct.. Publicado em: 03/12/2018
-
12. Identificación de precipitados en aleaciones U-Nb-Zr tratadas térmicamente a 850 ºC
ABSTRACT At the present, the international goal is to develop and qualify a very high U density fuel for high flux research reactors. The selected U-alloy must present an isotropic crystalline structure at the end of the fuel fabrication process. These types of structures exhibit stable behavior under irradiation. In particular, it is wanted to retain as met
Matéria (Rio J.). Publicado em: 19/07/2018