Molecularly Imprinted Polymer
Mostrando 1-12 de 15 artigos, teses e dissertações.
-
1. Graphite-Polyurethane Composite Electrode Modified with Molecularly Imprinted Polymer for Determination of Diclofenac
A molecularly imprinted polymer (MIP) was prepared using the anti-inflammatory diclofenac (DCF) as a template. A non-imprinted polymer (NIP) was also prepared as a control. These MIP and NIP were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET), revealing a higher porosity in the fir
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Molecularly Imprinted Polypyrrole on Glassy Carbon Electrode Modified with Reduced Graphene Oxide and Gold Nanoparticles for Isoamyl Alcohol Analysis in Fusel Oil
A molecularly imprinted electrochemical sensor for determination of isoamyl alcohol was successfully constructed by modifying the glassy carbon electrode (GCE) with gold nanoparticles (AuNPs) and reduced graphene oxide (RGO). The modification of the GCE increased the electron transfer rate and the electrode surface area, which, consequently, made more room a
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
3. Determining Methamphetamine in Urine by Molecularly Imprinted Polymer Assisted Paper Spray Ionization Mass Spectrometry
The usefulness of molecularly imprinted polymer assisted paper spray ionization mass spectrometry (MIP-PSI-MS) for the determination of methamphetamine in urine has been demonstrated. MIP-PSI-MS is a method in which a MIP is synthesized on the surface of a paper, producing a chemically selective paper surface with molecular recognition sites for a target ana
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
4. Elevated Lipoprotein(A) in Children and Adolescents: Early Identification is Key for Successful Intervention
The usefulness of molecularly imprinted polymer assisted paper spray ionization mass spectrometry (MIP-PSI-MS) for the determination of methamphetamine in urine has been demonstrated. MIP-PSI-MS is a method in which a MIP is synthesized on the surface of a paper, producing a chemically selective paper surface with molecular recognition sites for a target ana
Int. J. Cardiovasc. Sci.. Publicado em: 2021-02
-
5. A New Electrochemical Platform Based on a Polyurethane Composite Electrode Modified with Magnetic Nanoparticles Coated with Molecularly Imprinted Polymer for the Determination of Estradiol Valerate in Different Matrices
A polyurethane composite electrode modified with magnetic nanoparticles (mag; Fe3O4) coated with molecularly imprinted polymers (MIPs) was developed for the electrochemical determination of estradiol valerate. Chemical and morphological analyses of the mag-MIP were performed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (E
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
6. Construction and Evaluation of a Graphene Oxide Functionalized Aminopropyltriethoxy Silane Surface Molecularly Imprinted Polymer Potentiometric Sensor for Dipyridamole Detection in Urine and Pharmaceutical Samples
A dipyridamole (DIP) based surface molecularly imprinted polymer (MIP) was synthesized and applied as a sensing agent in a sensing layer of a new modified potentiometric carbon paste electrode (CPE). The potentiometric modified CPEs (GO@SiO2-NH2-MIP/MWCNTs/CPE, where GO is graphene oxide and MWCNTs is multi-walled carbon nanotubes) showed an improved perform
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
7. Determinação de designer drugs em saliva por paper spray mass spectrometry
Determination of two drugs of abuse in saliva has been performed by Paper Spray Ionization Mass Spectrometry (PSI-MS) using a Molecularly Imprinted Polymer (MIP) coated paper as substrate. The method has been optimized for quantification of 3,4-methylenedioxy- N-methylamphetamine (MDMA) and methamphetamine, 3,4-methylenedioxyamphetamine (MDA) from synthetic
Quím. Nova. Publicado em: 15/08/2019
-
8. Design of a New Molecularly Imprinted Polymer Selective for Hydrochlorothiazide Based on Theoretical Predictions Using Gibbs Free Energy
A molecularly imprinted polymer (MIP) for the diuretic drug hydrochlorothiazide (HCTZ) based on theoretical predictions was developed. Molecular modeling calculations were performed to study the intermolecular interactions in the pre-polymerization mixture and to select a suitable functional monomer and a porogenic solvent for the synthesis of the MIP. To co
J. Braz. Chem. Soc.. Publicado em: 2016-12
-
9. ADSORPTION PROCESS OF MOLECULARLY IMPRINTED SILICA FOR EXTRACTION OF LACTOSE FROM MILK
Abstract In Brazil, about 25-30% of the population has some degree of intolerance to lactose, a disorder associated with the inability of the body to digest lactose due to a disability or absence of the enzyme lactase. The goal of this study was to evaluate the performance of adsorption of lactose from fresh milk using a fixed bed column of molecularly impri
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
10. Development of a Molecularly Imprinted Modified Electrode to Evaluate Phenacetin Based on the Preconcentration of Acetaminophen
A glassy carbon electrode modified with a molecularly imprinted polymer (MIP) containing phenacetin recognition sites is introduced. The phenacetin-selective MIP was synthesised based on the electropolymerisation of pyrrole in a 1:1 (v/v) water/ethanol with HClO4 solution. The MIP-modified electrode showed higher recognition ability in comparison with a bare
J. Braz. Chem. Soc.. Publicado em: 2016-01
-
11. Semi-Empirical Quantum Chemistry Method for Pre-Polymerization Rational Design of Ciprofloxacin Imprinted Polymer and Adsorption Studies
It is well known that selectivity of molecularly imprinted polymers (MIPs) depends on adequate choice of functional monomer before the experimental synthesis. Computational simulation seems to be an ideal way to produce selective MIPs. In this work, we have proposed the use of semi-empirical simulation to obtain the best monomer able to strongly interact wit
J. Braz. Chem. Soc.. Publicado em: 2016-01
-
12. LIBS e nanopartículas fluorescentes : novas estratégias para determinação de íons Cu(II) em águas / LIBS and fluorescent nanoparticles : new strategies for the determination of Cu(II) ions in water
Neste trabalho diferentes fases sensoras foram desenvolvidas para implementar novas estratégias para a determinação de íons cobre em águas naturais, empregando Espectroscopia Óptica de Emissão em Plasma Induzido por Laser (LIBS) e Espectroscopia de Luminescência. Nas determinações por LIBS, membranas de PVC plastificadas foram empregadas para extra
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/04/2012