Modulus Of Elasticity Of Wood
Mostrando 1-12 de 45 artigos, teses e dissertações.
-
1. STUDY OF THERMAL EXPANSION AND COMPRESSION STRENGTH OF THREE WOOD SPECIES FROM PLANTATIONS
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
CERNE. Publicado em: 2020-06
-
2. Inflammatory segmental vitiligo during oral isotretinoin use: a casual association?,
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
An. Bras. Dermatol.. Publicado em: 2020-06
-
3. INFLUENCE OF FATIGUE ON BENDING OF Pinus caribaea WOOD
ABSTRACT This research aimed to evaluate the effect of the number of fatigue cycles (NC, 0 – reference, 450, 4500, 45000, and 90000) for frequencies (Fr) of oscillation equal to 0.5 and 1.0 Hz on the modulus of elasticity (Em) and operating stress (σm) in the static bending of Pinus caribaea wood. Em and σm were determined taking into account three speci
Eng. Agríc.. Publicado em: 2020-04
-
4. Number of laminae on the mechanical behavior of glued laminated timber (glulam) of Toona ciliata produced with vegetable polyurethane adhesive
RESUMO A madeira laminada colada (MLC) é um material compósito obtido a partir da colagem de lâminas de madeira dispostas com as fibras paralelas entre si. O objetivo deste trabalho foi avaliar a influência do número de lâminas no comportamento mecânico de MLC de Toona ciliata produzidas com adesivo poliuretano de base vegetal. As vigas de MLC foram p
Ciênc. agrotec.. Publicado em: 20/12/2019
-
5. Painéis de pínus e bagaço de cana empregando-se dois adesivos para uso na construção civil
Resumo O presente trabalho objetivou produzir e avaliar painéis aglomerados empregando-se partículas de bagaço de cana-de-açúcar (Saccharum officinarum) e de pínus (Pinus taeda, Pinus elliottii), comparando-se a eficiência de dois adesivos, ureia-formaldeído e poliuretano derivado do óleo de mamona. Os painéis foram preparados com 60% de partícula
Ambient. constr.. Publicado em: 03/10/2019
-
6. Physical-mechanical Properties of Plywood Produced With Acrocarpus fraxinifolius and Pinus oocarpa
ABSTRACT The present study has the objective of evaluating the physical-mechanical properties of plywood produced with Acrocarpus fraxinifolius wood, as well as the effect of combining their veneer with Pinus veneer. The wood of Acrocarpus fraxinifolius and Pinus oocarpa were used in the production of the panels. The plywood was produced with five veneers; t
Floresta Ambient.. Publicado em: 05/09/2019
-
7. Produção de compósitos madeira-cimento de baixa densidade pelo método vibro-dinâmico de compactação
RESUMO Esse trabalho teve como objetivo avaliar o potencial de uso da madeira de quatro espécies tropicais da Amazônia na produção de compósitos madeira-cimento pelo método de adensamento por vibro compactação. As partículas de madeira foram produzidas a partir de costaneiras das espécies Murici (Byrsonima crispa), Ingá vermelho (Inga paraensis),
Matéria (Rio J.). Publicado em: 10/06/2019
-
8. PARTICLEBOARD PRODUCTION WITH RESIDUES FROM MECHANICAL PROCESSING OF AMAZONIAN WOODS
RESUMO A falta de aproveitamento dos resíduos gerados pelo processamento mecânico da madeira e seu descarte inadequado são desafios para a indústria madeireira. Esses poderiam ser utilizados em produtos de maior valor agregado. O objetivo deste trabalho foi avaliar a utilização de resíduos gerados pelo processamento mecânico das madeiras amazônicas
Rev. Árvore. Publicado em: 20/05/2019
-
9. CHEMICALLY TREATED GLUED LAMINATED PARICÁ TIMBER (Schizolobium parahyba var. amazonicum)
ABSTRACT In the production of glue-laminated timber (GLT), boards derived from planted forest wood with easy workability are glued on top of one another. The main objective of the present work was to evaluate the performance of paricá timber GLT beams (5 × 10 cm) on GLT. Three procedures were performed: (1) GLT beams (5 × 10 cm) were produced using natura
Eng. Agríc.. Publicado em: 25/04/2019
-
10. Painéis de partículas elaborados do mesocarpo do dendê como alternativa ao MDF utilizado na construção civil
RESUMO A escassez dos recursos florestais integrada à necessidade de aquisição de produtos mais ecológicos demanda o uso de outros tipos de biomassa, além da madeira no setor construtivo. Diante disso, o mesocarpo do dendê - resíduo oriundo da agroindústria e com grande potencial de utilização para desenvolvimento de novos materiais - surge como al
Eng. Sanit. Ambient.. Publicado em: 01/04/2019
-
11. Particle Sizes and Wood/Cement Ratio Effect on the Production of Vibro-compacted Composites
ABSTRACT The aim of this study was to evaluate the influence of particle size and the wood/cement ratio on the physical and mechanical properties of vibro-compacted wood-cement composites. The effects of three different particle sizes (diameter between 1.4-2.36 mm; 2.36-4 mm; and 4-9.56 mm) and wood:cement ratios of 1:2.75, 1:2 and 1:1.5 on wood-cement comp
Floresta Ambient.. Publicado em: 30/07/2018
-
12. Evaluating the Effects of Removing Fines from Particleboards Manufactured from Amazonian Wood Residue
ABSTRACT The aim of this research was to evaluate the effects of removing fines on the physical and mechanical properties of high-density particleboard produced by mechanical processing of Caryocar villosum (pequiá), Tachigali myrmecophyla (tachi-preto) and Hymenolobium excelsum (angelim-da-mata) Amazonian woods. The panels were produced with nominal densi
Floresta Ambient.. Publicado em: 26/07/2018