Modal Identification
Mostrando 1-12 de 55 artigos, teses e dissertações.
-
1. Damage localization and quantification of tower structures based on the super-element method
Abstract Tower structures are sensitive to hurricanes or earthquakes, whereupon they are easily damaged due to large deflection and dynamic responses. Herein, a method is proposed to accurately identify the location and extent of damage in tower structures. Firstly, a tower structure is divided into several sections along its height, and each section is rega
REM, Int. Eng. J.. Publicado em: 2021-01
-
2. A VALORAÇÃO NAS SENTENÇAS COM ADJUNTOS MODAIS DO CONTO “GRACE”, DE JOYCE, E DE DUAS DE SUAS REINSTANCIAÇÕES PARA O PORTUGUÊS DO BRASIL
Resumo A Valoração é um sistema semântico-discursivo interpessoal que prevê significados de Atitude, Comprometimento e Gradação (Martin and White). Este artigo tem por objetivo investigar de forma geral os três sistemas valorativos nas sentenças com Adjuntos Modais do conto “Grace”, de James Joyce (a), e em duas Reinstanciações para o portugu�
Cad. Trad.. Publicado em: 25/11/2019
-
3. Evaluation of low-cost MEMS accelerometers for SHM: frequency and damping identification of civil structures
Abstract Sensing techniques based on accelerometers for modal parameters identification are among the most studied and applied in Structural Health Monitoring of civil structures. The advent of low-cost MEMS accelerometers and open-source electronic platforms, such as Arduino, have facilitated the design of low-cost systems suitable for modal identification,
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
4. An SHM approach using machine learning and statistical indicators extracted from raw dynamic measurements
Abstract Structural Health Monitoring using raw dynamic measurements is the subject of several studies aimed at identifying structural modifications or, more specifically, focused on damage assessment. Traditional damage detection methods associate structural modal deviations to damage. Nevertheless, the process used to determine modal characteristics can in
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
5. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
6. Modal Parameter Extraction of a Huge Four Stage Centrifugal Compressor Using Operational Modal Analysis Method
Abstract In recent years, modal analysis has become one of the essential methods for modification and optimization of dynamic characteristics of engineering structures. This is the first published study to identify modal parameters of a complex four-stage centrifugal compressor using Operational Modal Analysis (OMA). Vibrational response was measured contin
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
7. Updating Finite Element Model Using Stochastic Subspace Identification Method and Bees Optimization Algorithm
Abstract This study investigates the application of operational modal analysis along with bees optimization algorithm for updating the finite element model of structures. Bees algorithm applies instinctive behavior of honeybees as they look for nectar of flowers. The parameters that needed to be updated are uncertain parameters such as geometry and material
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
8. An Efficient Human Identification through MultiModal Biometric System
ABSTRACT Human identification is essential for proper functioning of society. Human identification through multimodal biometrics is becoming an emerging trend, and one of the reasons is to improve recognition accuracy. Unimodal biometric systems are affected by various problemssuch as noisy sensor data,non-universality, lack of individuality, lack of invaria
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
9. Comparison of In-Flight Measured and Computed Aeroelastic Damping: Modal Identification Procedures and Modeling Approaches
ABSTRACT The Operational Modal Analysis technique is a methodology very often applied for the identification of dynamic systems when the input signal is unknown. The applied methodology is based on a technique to estimate the Frequency Response Functions and extract the modal parameters using only the structural dynamic response data, without assuming the kn
J. Aerosp. Technol. Manag.. Publicado em: 2016-06
-
10. A Novel Methodology Using Simplified Approaches for Identification of Cracks in Beams
Abstract In this paper, natural frequency based forward and inverse methods are proposed for identifying multiple cracks in beams. Forward methods include simplified definition of the natural frequency drops caused by the cracks. The ratios between natural frequencies obtained from multi-cracked and un-cracked beams are determined by an approach that uses th
Lat. Am. j. solids struct.. Publicado em: 2015
-
11. Unitary input DEA model to identify beef cattle production systems typologies
The cow-calf beef production sector in Brazil has a wide variety of operating systems. This suggests the identification and the characterization of homogeneous regions of production, with consequent implementation of actions to achieve its sustainability. In this paper we attempted to measure the performance of 21 livestock modal production systems, in their
Pesqui. Oper.. Publicado em: 21/06/2012
-
12. Identificação experimental modal da caixa acústica de um violão clássico
Este trabalho consiste na aplicação de técnicas de identificação de parâmetros estruturais, especificamente massa, rigidez e amortecimento, à caixa acústica de um violão clássico. A abordagem experimental tradicional é adotada, com medição de aceleração em um ponto da estrutura e excitação proveniente de martelo instrumentado registrada em d
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012