Mixture Models
Mostrando 13-24 de 208 artigos, teses e dissertações.
-
13. Estrategia para la optimización de un compuesto de caucho con aceite de soja utilizando diseños de experimentos
ABSTRACT When a rubber component is made, is necessary to start from a “rubber compound” which may be composed of one or more polymers and various additives or fillers. The development of an elastomer mixture to produce a compound with a specific end-use is complicated in the field of rubber technology. Therefore, the successful development of a compound
Matéria (Rio J.). Publicado em: 19/07/2018
-
14. Preparation and Ablation Performance of Lightweight Phenolic Composite Material under Oxyacetylene Torch Environment
ABSTRACT The present study investigates the influence of fiber content on thermal properties of short silica fiber (SSF) reinforced modified resole resin (MRR) composites. For this purpose, different SSF loading composites were prepared: 40, 55, and 65 wt.%. The ablation resistance related to mass loss parameters was quantified by testing under an oxyacetyle
J. Aerosp. Technol. Manag.. Publicado em: 21/06/2018
-
15. IMPACT OF THE HYDRAULIC LOADING RATE ON THE HYDRODYNAMIC CHARACTERISTICS OF AN ANAEROBIC FIXED BED REACTOR TREATING CATTLE SLAUGHTERHOUSE WASTEWATER
ABSTRACT The hydrodynamic behavior of an anaerobic fixed bed reactor (AFBR) was evaluated in the treatment of cattle slaughterhouse wastewater. The AFBR was operated at hydraulic retention time (HRT) of 14, 11 and 8 h. Stimulus-response assays were carried out with Eosin Y and the experimental data were adjusted to the single-parameter theoretical models of
Eng. Agríc.. Publicado em: 2018-06
-
16. Optimization of polyphenols and acceptability of jelly candies with ginger ( Zingiber officinale R.) extract and honey with Mixture Design
Abstract The objective of this work was to optimize total polyphenols content, firmness, sweetness and general acceptability of jelly candies developed with ginger extract and six proportions of sucrose, honey and glucose. To study the effect of proportions, the Simplex Lattice Mixture Design was used. The design was replicated for four levels of ginger ext
Braz. J. Food Technol.. Publicado em: 17/05/2018
-
17. COMPARISON OF RESPONSE SURFACE METHODOLOGY (RSM) AND ARTIFICIAL NEURAL NETWORKS (ANN) TOWARDS EFFICIENT OPTIMIZATION OF FLEXURAL PROPERTIES OF GYPSUM-BONDED FIBERBOARDS
ABSTRACT In this study, the hydration behavior of gypsum paste mixed with bagasse and kenaf fibers as lignocellulosic material and fiberglass as inorganic material is evaluated. Moreover, the properties of gypsum-bonded fiberboard (GBFB) are examined using bagasse fibers (Saccharum officinarum.L), kenaf fibers (Hibiscus cannabinus.L) and industrial fiberglas
CERNE. Publicado em: 2018-03
-
18. ZEÓLITA 4A PARA PURIFICAÇÃO DO GÁS DE ATERRO SANITÁRIO
The anaerobic decomposition in landfills produces a gas mixture known as landfill biogas. This biogas consists mainly of CH4 and CO2. The CO2 removal can be carried out by means of adsorption. In order to promote CO2 removal, zeolite type 4A was used as solid adsorbent. The synthesized zeolite was characterized by scanning electron microscopy and X-ray diffr
Quím. Nova. Publicado em: 2018-01
-
19. Imputation of genetic composition for missing pedigree data in Serrasalmidae using morphometric data
ABSTRACT This study aimed to impute the genetic makeup of individual fishes of Serrasalmidae family on the basis of body weight and morphometric measurements. Eighty-three juveniles, belonging to the genetic groups Pacu, Pirapitinga, Tambaqui, Tambacu, Tambatinga, Patinga, Paqui and Piraqui, were separated into 16 water tanks in a recirculation system, with
Sci. agric. (Piracicaba, Braz.). Publicado em: 2017-12
-
20. A newly validated high-performance liquid chromatography method with diode array ultraviolet detection for analysis of the antimalarial drug primaquine in the blood plasma
Abstract INTRODUCTION: Primaquine (PQ) diphosphate is an 8-aminoquinoline antimalarial drug with unique therapeutic properties. It is the only drug that prevents relapses of Plasmodium vivax or Plasmodium ovale infections. In this study, a fast, sensitive, cost-effective, and robust method for the extraction and high-performance liquid chromatography with
Rev. Soc. Bras. Med. Trop.. Publicado em: 2017-08
-
21. SOLUBILITY OF A NEW ANTIRETROVIRAL DRUG (CRS 74) IN AQUEOUS ETHANOL MIXTURES
Abstract This study concerns a new antiretroviral drug named CRS 74, which has a limited bioavailability because of its low aqueous solubility and dissolution rate. To improve these properties, CRS 74 can be recrystallized by using Liquid Anti-Solvent (LAS) crystallization. Ethanol is chosen as the solvent under study for the molecule and water as the anti-s
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
22. Finite Element Modelling for Static and Free Vibration Response of Functionally Graded Beam
Abstract A 1D Finite Element model for static response and free vibration analysis of functionally graded material (FGM) beam is presented in this work. The FE model is based on efficient zig-zag theory (ZIGT) with two noded beam element having four degrees of freedom at each node. Linear interpolation is used for the axial displacement and cubic hermite int
Lat. Am. j. solids struct.. Publicado em: 2016-04
-
23. Synthesis Optimization of MCM-41 for CO2 Adsorption Using Simplex-centroid Design
There is a growing concern on the relationship between anthropogenic carbon dioxide and climate changes. A promising approach is the adsorption technology using mesoporous MCM-41 materials that can be easily synthesized to depict structures adequate to the flow of gas. The aim of this study was to improve the synthesis of MCM-41 using cationic surfactant mix
Mat. Res.. Publicado em: 2015-08
-
24. Growth Characteristics Modeling of Mixed Culture of Bifidobacterium bifidum and Lactobacillus acidophilus using Response Surface Methodology and Artificial Neural Network
Different culture conditions viz. additional carbon and nitrogen content, inoculum size and age, temperature and pH of the mixed culture of Bifidobacterium bifidum and Lactobacillus acidophilus were optimized using response surface methodology (RSM) and artificial neural network (ANN). Kinetic growth models were fitted for the cultivations using a Fractional
Braz. arch. biol. technol.. Publicado em: 2014-12