Misturas Asfalticas Densas
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Analysis of the effects of crumb rubber and shale-oil residue on mechanical properties of asphalt mixtures / Análise dos efeitos da borracha moída de pneu e do resíduo de óleo de xisto sobre algumas propriedades mecânicas de misturas asfáticas densas
In Brazil, since the beginning of the 90s, have been developed researches on the application of asphalt-rubber seeking the reduction of environmental problems created by the used tires, and the improvement of the characteristics of the produced binder. Taking this into account, the purpose of this research is to evaluate the mechanical performance of eight h
Publicado em: 2008
-
2. Estudo do Efeito de Diferentes Granulometrias no Comportamento MecÃnico de Misturas AsfÃlticas Densas DescontÃnuas Tipo Stone Matrix Asphalt (SMA) / STUDY OF THE EFFECTS OF DIFFERENT GRADATIONS ON THE MECHANICAL BEHAVIOR OF DENSE GAP GRADED STONE MATRIX ASPHALT (SMA) MIXTURES
No meio rodoviÃrio brasileiro, que detÃm 96,2% da matriz de transporte de passageiros e 61,8% da matriz de cargas, Ã flagrante a deterioraÃÃo dos revestimentos asfÃlticos provocada pelo crescente aumento do volume e do peso das cargas transportadas. Tal configuraÃÃo contribui sobremaneira para o surgimento de defeitos, destacando-se as deformaÃÃes
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/12/2007
-
3. Avaliação da susceptibilidade térmica e do efeito das condições ambientais no enrijecimento de misturas asfálticas densas à luz de seus comportamentos resilientes / Evaluation of the thermal susceptibility and the effect of the environmental conditions in the hardening of dense-graded hot-mix asphalt to the light of their resilient behavior
Este trabalho teve como objetivo avaliar o módulo de resiliência de misturas asfálticas densas sob duas condições. A primeira foi o estudo dos efeitos do enrijecimento de misturas asfálticas densas em condições ambientais diferentes (cinco condições) que são: AAAL (ao ar e à luz), AASL (ao ar e sem luz), AVAL (baixa pressão atmosférica e à luz
Publicado em: 2007
-
4. Estudo laboratorial de misturas asfálticas a frio produzidas com incorporação de borracha de pneus
As misturas densas, em geral, apresentaram melhores resultados com o acréscimo de borracha que as misturas semi-densas. A inclusão de borracha de pneus a pré-misturados a frio mostrou-se viável e exeqüível, consumindo grande quantidade de pneus resultando em benefícios ambientais.
Publicado em: 2007
-
5. Avaliação da influência do tipo de agregado, do tipo de ligante, do tipo de moldagem e do tipo de fíler na vida de fadiga de misturas asfálticas densas / An evaluation of aggregate type, asphalt type, molded type, and filler type on fatigue lifespan of asphalt mixtures
The purpose of this research is to evaluate the fatigue behavior of some asphalt mixtures, by means of indirect tests with controlled stress, considering the variation of four factors: aggregate type, asphalt type, molded type and filler type. The specimens was molded in same gradation (center of DNER C gradation), according to Marshall, ASTM D 4867 or AASHT
Publicado em: 2007
-
6. Contributions to the study of effects of aggregate properties on mechanical behavior of hot mix asphalt (HMA) / Contribuições ao estudo da influência de propriedades de agregados no comportamento de misturas asfálticas densas
O objetivo principal desta pesquisa é avaliar a influência que as propriedades estudadas dos agregados exercem sobre propriedades volumétricas e mecânicas de misturas asfálticas densas. Para tanto, foram avaliadas as propriedades de consenso e de origem, especificadas pelo Superpave, de um conjunto de agregados, além de suas densidades, porosidade, abs
Publicado em: 2006
-
7. Considerations on adhesion and moisture susceptibility of asphalt mixtures by mean of mechanical properties / Considerações acerca da adesão e da suscetibilidade à umidade de misturas asfálticas densas à luz de algumas propriedades mecânicas
This study presents a contribution to the understanding of the adhesion phenomenon and its loss when water acts in asphalt mixtures. Several kinds of asphalt mixtures were evaluated by means of ASTM and AASHTO moisture susceptibility tests. Experiments based on factorial design were performed considering some of the main factors that act on adhesion phenomen
Publicado em: 2006
-
8. Study of polymer modified asphalt using RET polymer for paving aplication. / Estudo de asfaltos modificados por polímeros do tipo RET para aplicações em pavimentos.
O presente trabalho avalia as alterações de propriedades dos asfaltos pela modificação por polímero do tipo RET (Reactive Elastomeric Terpolymer) e de comportamento de misturas asfálticas densas usinadas com estes asfaltos modificados. Para atingir este objetivo, são apresentados os resultados do monitoramento realizado no trecho experimental executad
Publicado em: 2006
-
9. Avaliação das influências do tipo de ligante e do volume de vazios na vida de fadiga de algumas misturas asfálticas / Avaliation of the influences of asphalt s types and air voids in the fatigue s life of some asphalt mixtures
The purpose of this research is to evaluate the fatigue behavior of some asphalt mixtures, by means of indirect tensile tests with controlled stress. In order to evaluate different asphalt mixtures, it was molded specimens according to Marshall design method, considering the variation of two factors: asphalt type and air voids. Asphalt concrete specimens wer
Publicado em: 2005
-
10. Avaliação dos efeitos do tipo de asfalto e da distribuição granulométrica do agregado nas fluências estática e dinâmica de misturas asfálticas densas / Effects of binder type and aggregate size distribution on static and dynamic creeps test results of dense asphalt mixtures
Apresentam-se os resultados de uma investigação sobre os fatores que influem no comportamento de revestimentos asfálticos em relação à deformação permanente, avaliado através dos ensaios de fluência por compressão uniaxial estática e dinâmica, realizados em corpos-de-prova moldados segundo as normas do ensaio Marshall. Os fatores selecionados pa
Publicado em: 2004
-
11. Influence evaluation of some factors in the mechanical properties of binder mixtures using design and analysis of asymmetric fractional factorial experiments technique / Avaliação da influência de alguns fatores nas propriedades mecânicas de misturas asfálticas densas, à luz da técnica de planejamento e análise de experimentos fatoriais fracionários assimétricos
This work deals with the influence of some factors in the mechanical behavior of asphalt mixtures stability and flexibility. Three types of binders were tested, conventional one, modified with 4,5% of SBS and modified with 20% of recycled tire rubber. Two aggregate gradations were tested, center of B and C gradations of DNER (1997). Four binder contents were
Publicado em: 2004
-
12. Avaliação do reaproveitamento de areia de fundição como agregado em misturas asfálticas densas / Evaluation of the reusing of waste foundry sand as an aggregate in dense asphalt
Foundry sand is an industrial solid waste resulting from sand casting process in foundry industries. Depending on the type of foundry process (green sand molding, shell sand molding, molding using synthetic resin and others) and of the type cast metal, this waste may contain elements and/or chemical compounds that may cause environmental impact. The substanc
Publicado em: 2004