Mining Engineering
Mostrando 1-12 de 32 artigos, teses e dissertações.
-
1. Magnetic concentration route for recovering pellet feed fines stored in a mining dam
Abstract The greatest and noblest challenge of mining engineering for the present and the future of iron ore treatment could be considered as the pursuit of optimizing the use of mineral resources. The use of mining tailings, in the mineral sector itself, or in another industrial branch, meets the needs of circular economy as it increases the useful service
REM - International Engineering Journal. Publicado em: 2022
-
2. Strain analysis in diametral compression test through digital image correlation
Abstract In the search for alternatives to obtain more information from rock tests and to make them more accessible, this study applies the Digital Image Correlation technique (DIC 2D) in a diametral compression test called Brazilian Test, comparing the result measured by an extensometer with the result obtained by DIC. Rock tests provide information about r
REM - International Engineering Journal. Publicado em: 2022
-
3. Peculiarities of drilling and blasting in underground small-scale mines
Abstract Artisanal and Small-scale Mining (ASM) is a prominent activity in the extractive industry: considering only gold, it produces about 20% of the world market supply. Despite this fact, ASM is generally associated with the negative aspects of its environ mental impact, and operational research is generally neglected. This article empha sizes the peculi
REM, Int. Eng. J.. Publicado em: 2020-09
-
4. Detection of seepage paths in small earth dams using the self-potential method (SP)
Abstract The application of geoelectric methods, such as induced polarization (IP), the electrical resistivity and the self-potential (SP), presents an important indirect study methodology in several areas of geology, such as mining, geotechnics and environmental geology. The present study deals with the results of the application of the self-potential metho
REM, Int. Eng. J.. Publicado em: 2020-09
-
5. Optimum mine production rate based on price uncertainty
Abstract The production rate of a mining operation has an important effect on the operational cycle and gross profit, which are often evaluated based on engineering practices. Assessment of the economic performance of mine operations in mining engineering is of great importance because an incorrect production rate can result in significant financial losses.
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
6. ARTIFICIAL NEURAL NETWORKS APPLIED IN FOREST BIOMETRICS AND MODELING: STATE OF THE ART (JANUARY/2007 TO JULY/2018)
ABSTRACT Artificial Intelligence has been an important support tool in different spheres of activity, enabling knowledge aggregation, process optimization and the application of methodologies capable of solving complex real problems. Despite focusing on a wide range of successful metrics, the Artificial Neural Network (ANN) approach, a technique similar to t
CERNE. Publicado em: 09/09/2019
-
7. Investigation of the Roof Presplitting and Rock Mass Filling Approach on Controlling Large Deformations and Coal Bumps in Deep High-Stress Roadways
Abstract Roadway deformation and coal bumps are major challenges for underground engineering. Taking the Lu'an mining district in Shanxi Province as an example, the failure mechanism of deep high-stress roadway was studied. Numerical simulations and the similar material test were performed to investigate the effect of the roof presplitting and rock mass fill
Lat. Am. j. solids struct.. Publicado em: 27/05/2019
-
8. Direct block scheduling under marketing uncertainties
Abstract Mineral projects are composed of geological, operational and market uncertainties, and reducing these uncertainties is one of the objectives of engineering. Most surveys assess the impact of geological and operational uncertainties on the mining planning. The objective of this work is to study the impact of market uncertainty on the mineral activity
REM, Int. Eng. J.. Publicado em: 2018-04
-
9. A high-level dynamic analysis approach for studying global process plant availability and production time in the early stages of mining projects
Abstract In the early stage of front-end studies of a Mining Project, the global availability (i.e. number of hours a plant is available for production) and production (number of hours a plant is actually operated with material) time of the process plant are normally assumed based on the experience of the study team. Understanding and defining the availabili
REM, Int. Eng. J.. Publicado em: 2017-06
-
10. An Implementation of Self-Organizing Maps for Airfoil Design Exploration via Multi-Objective Optimization Technique
ABSTRACT Design candidates obtained from optimization techniques may have meaningful information, which provides not only the best solution, but also a relationship between object functions and design variables. In particular, trade-off studies for optimum airfoil shape design involving various objectives and design variables require the effective analysis t
J. Aerosp. Technol. Manag.. Publicado em: 2016-06
-
11. Redes neurais com topologias otimizadas aplicadas na modelagem de dados geotécnicos e pluviométricos para predição de deslizamentos de solo
The problems related to landslides caused by rain on slopes have been a reality in several cities of Brazil and parts of the world. The government and research institutions have sought, in partnership, solutions to minimize the damage caused by such accidents, from studies of correlation between rainfall and landslide occurrences enabling the development of
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/06/2012
-
12. Evidence-based software engineering: systematic literature review process based on visual text mining / Engenharia de software baseada em evidências: processo de revisão sistemática de literatura baseado em mineração visual de texto
Context: Systematic literature review (SLR) is a methodology used to aggregate all relevant evidence of a specific research question. One of the activities associated with the SLR process is the selection of primary studies. The process used to select primary studies can be arduous, particularly when the researcher faces large volumes of primary studies. Ano
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/05/2012