Miniaturization
Mostrando 13-24 de 55 artigos, teses e dissertações.
-
13. Status and Trends of Smallsats and Their Launch Vehicles — An Up-to-date Review
ABSTRACT This paper presents an analysis of the scenario of small satellites and its correspondent launch vehicles. The miniaturization of electronics, together with reliability and performance increase as well as reduction of cost, have allowed the use of commercials-off-the-shelf in the space industry, fostering the Smallsat use. An analysis of the launche
J. Aerosp. Technol. Manag.. Publicado em: 2017-09
-
14. DETERMINAÇÃO DE FOSFATO EM REFRIGERANTES UTILIZANDO UM SCANNER DE MESA E ANÁLISE AUTOMATIZADA DE DADOS: UM EXEMPLO DIDÁTICO PARA ENSINO DE QUÍMICA
We propose here the quantification of the phosphorus content in cola drinks by molybdenum blue method. Molybdenum blue method was carried out in the wells of a microplate, where method miniaturization represents reduction in reagents required, improved safety, reduced waste stream, and increased sample throughput. The phosphate concentration was determinate
Quím. Nova. Publicado em: 2017-08
-
15. Compact MIMO Antenna for Multiband Mobile Applications
Abstract This paper presents a multiple input multiple output (MIMO) antenna for multiband operation based on meander lines with L shaped metallic strip. Meander lines is basically a monopole antenna loaded with multiple sections of short circuited transmission line that acts as inductor and alter the impedance characteristics of antenna. Antenna size miniat
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-04
-
16. Artificial motor control for electrically stimulated upper limbs of plegic or paretic people
Introduction: Functional Electrical Stimulation (FES) is a technique used in the restoration and generation of movements performed by subjects with neuromuscular disorders such as spinal cord injury (SCI). The purpose of this article is to outline the state of the art and perspectives of the use of FES in artificial motor control of the upper limbs in pareti
Res. Biomed. Eng.. Publicado em: 14/06/2016
-
17. Nonlinear Optical Properties and Femtosecond Laser Micromachining of Special Glasses
Materials specially designed for photonics have been at the vanguard of chemistry, physics and materials science, driven by the development of new technologies. One particular class of materials investigated in this context are glasses, that in principle should exhibit high third order optical nonlinearities and fast response time, whose optical properties c
J. Braz. Chem. Soc.. Publicado em: 2015-12
-
18. Female Pattern Hair Loss: a clinical and pathophysiological review
AbstractFemale Pattern Hair Loss or female androgenetic alopecia is the main cause of hair loss in adult women and has a major impact on patients' quality of life. It evolves from the progressive miniaturization of follicles that lead to a subsequent decrease of the hair density, leading to a non-scarring diffuse alopecia, with characteristic clinical, dermo
An. Bras. Dermatol.. Publicado em: 2015-08
-
19. Miniaturization in Otothyris Myers, 1927 (Loricariidae: Hypoptopomatinae)
Muitas espécies de peixes de água doce são consideradas miniaturas, entretanto, sua identificação é frequentemente baseada apenas no critério arbitrário que é seu reduzido tamanho corporal. Apesar de algumas espécies de Otothyris terem sido propostas como miniaturas, informações acerca do processo de miniaturização no gênero e suas consequên
Neotrop. ichthyol.. Publicado em: 2014-03
-
20. Analysis of the transformations temperatures of helicoidal Ti-Ni actuators using computational numerical methods
The development of shape memory actuators has enabled noteworthy applications in the mechanical engineering, robotics, aerospace, and oil industries and in medicine. These applications have been targeted on miniaturization and taking full advantage of spaces. This article analyses a Ti-Ni shape memory actuator used as part of a flow control system. A Ti-Ni s
Mat. Res.. Publicado em: 10/05/2013
-
21. Machinability study of steels in precision orthogonal cutting
The miniaturization of components and systems is advancing steadily in many areas of engineering. Consequently, micro-machining is becoming an important manufacture technology due to the increasing demand for miniaturized products in recent years. Precision machining aims the production of advanced components with high dimensional accuracy and acceptable sur
Materials Research. Publicado em: 03/07/2012
-
22. Estudo de antenas patches de microfita miniaturizadas em banda larga para aplicação em dispositivos móveis e portáteis
Esse trabalho apresenta técnicas usadas para projetar e fabricar antenas patch de microfita para aplicações em dispositivos portáteis e móveis. Para isso, são avaliados diversos fatores que podem influenciar no desempenho das antenas patch de microfita. Técnicas de miniaturização são estudadas e empregadas visando a aplicação deste tipo de antena
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/12/2011
-
23. Imagens em trânsito: o telefone celular e as novas estéticas audiovisuais
This dissertation has as objective the analysis of the transformation of the media of voice - the cell phone, in a new device of production and audiovisual propagation. The research circumscribed the phenomenon of order technique and the evidences of its impact in the contemporary sociability, manifested in the autonomy that the carriers of cell phones have
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/03/2010
-
24. Environmentally responsive polymeric "intelligent" materials: the ideal components of non-mechanical valves that control flow in microfluidic systems
Miniaturization and commercialization of integrated microfluidic systems has had great success with the development of a wide variety of techniques in microfabrication, since they allowed their construction at a low cost and by following simple step-series procedures. However, one of the major challenges in the design of microfluidic systems is to achieve co
Brazilian Journal of Chemical Engineering. Publicado em: 2010-03