Microstructures
Mostrando 1-12 de 292 artigos, teses e dissertações.
-
1. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
2. O Que Faz um Artigo ser Mais Citado?
Abstract The Guacuí and Batatal lineaments in the southern region of the state of Espírito Santo (southeastern Brazil) can be traced from satellite images for tens of kilometers. They are considered shear zones associated to the final tectonic stages of the Araçuaí-West Congo (A-WC) Orogen during the Ediacaran-Cambrian period. In order to understand thei
Rev. adm. contemp.. Publicado em: 2020-12
-
3. Structure and tectonic significance of high- and low-temperature deformation along the lateral escape-related Guaçuí and Batatal shear zones, southern Araçuaí Orogen (southeastern Brazil)
Abstract The Guacuí and Batatal lineaments in the southern region of the state of Espírito Santo (southeastern Brazil) can be traced from satellite images for tens of kilometers. They are considered shear zones associated to the final tectonic stages of the Araçuaí-West Congo (A-WC) Orogen during the Ediacaran-Cambrian period. In order to understand thei
REM, Int. Eng. J.. Publicado em: 2020-12
-
4. Heat treatment analysis of ASTM A106 steel spheroidization and erosive wear at high temperatures
Abstract The microstructures of steels are altered when exposed to high working temperatures for long periods, which results in varied physical and chemical proprieties. This study evaluates the erosive wear behavior of ASTM A106 steel after it is exposed to high temperatures for long durations. Samples of normalized ASTM A106GrB steel were placed in a muffl
REM, Int. Eng. J.. Publicado em: 2020-12
-
5. Effects of Geometrical Feature on Microstructures and Mechanical Properties of Refill Friction Stir Spot Welding 6061 Aluminum Alloy
Refill friction stir spot welding (refill FSSW) is a solid state joining technology developed and patented by Helmholtz-Zentrum Geesthacht. Refill FSSW is a welding process suitable for spot joining lightweight materials in similar and dissimilar joint configuration. The result is a spot welded in lap configuration with minimal material loss and a flat surfa
Mat. Res.. Publicado em: 17/01/2020
-
6. Microstructure and Thermal Analyses of Cu87-xAl13Nbx High-Temperature Shape Memory Alloys
This paper presents a thermal and microstructural characterization of Cu87-xAl13Nbx (wt%) high temperature shape memory alloys (HTSMA), with Nb contents ranging from 1 to 3%. The alloys were obtained by arc melting under argon atmosphere. Thermal characterization was performed by differential scanning calorimetry (DSC), revealing that the phase martensitic t
Mat. Res.. Publicado em: 28/11/2019
-
7. Narrativas autobiográficas de mulheres com endometriose: que fenômenos permeiam os atrasos no diagnóstico?
Resumo Este artigo objetiva compreender a rede de significados construídos intersubjetivamente que caracterizam o fenômeno da endometriose na vida das mulheres acometidas, equilibrando perspectivas micro e macrossociais. Trata-se de uma pesquisa qualitativa ancorada na técnica de narrativa autobiográfica do sociólogo Fritz Schütze, que explorou a exper
Physis. Publicado em: 25/11/2019
-
8. Effect of Solid Solution Temperature on Microstructure and Corrosion Resistance of CoNiCrMo Alloy
Influence of solid solution temperature on microstructures and corrosion properties of CoNiCrMo alloy were investigated by means of optical microscopy (OM), scanning electron microscope (SEM) and electronic differential system. The corrosion resistance of CoNiCrMo alloy in 0.9%NaCl aqueous solution was also investigated. The results indicated that with the i
Mat. Res.. Publicado em: 24/10/2019
-
9. Crystallographic texture and microtexture of copper drawn at 295 K and 77 K
ABSTRACT The pure copper wires were wiredrawn at cryogenic and room temperatures. After deformation they presented important and significant differences in their crystallographic textures and microstructures. Therefore, this study aimed to investigate the evolution of crystallographic texture of pure copper drawn at temperatures of 295 K and 77 K and correla
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Análise comparativa entre a têmpera e partição versus a têmpera e revenimento para o aço SAE 4340
RESUMO Um novo tratamento térmico tem sido pesquisado recentemente, cuja denominação é têmpera e partição (T&P), com o intuito de criar aços com austenita estável em sua microestrutura. Inicialmente, esse tratamento foi realizado em aços de alto silício, não obstante, seu potencial alcança outros diversos materiais como os de baixa liga contendo
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Efeito do metal de adição na resistência ao desgaste por deslizamento de um aço estrutural soldado por GMAW
RESUMO O objetivo do presente trabalho foi avaliar o efeito do metal de adição na soldagem, e das microestruturas resultantes, na resistência ao desgaste de juntas soldadas de um aço estrutural ASTM A242, que possui resistência à corrosão atmosférica e é utilizado na fabricação de vagões destinados ao transporte de minério. As amostras foram sol
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Effects of Macrosegregation and Microstructure on the Corrosion Resistance and Hardness of a Directionally Solidified Zn-5.0wt.%Mg Alloy
This study aims to analyze the influence of macrosegregation on microstructure evolution, and of microstructure length scale on the corrosion resistance of a Zn-5.0wt.%Mg alloy casting. The analyzed samples were taken along the length of castings unidirectionally solidified in unsteady state conditions of heat extraction. Microstructure characterization, mic
Mat. Res.. Publicado em: 05/09/2019