Microstructure
Mostrando 13-24 de 1171 artigos, teses e dissertações.
-
13. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
14. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
15. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
16. Effects of sintering temperature on microstructure and properties of sanitaryware ceramic produced with waste material
Abstract This paper aims at exploring the possibility of using a great percentage of recycled materials into vitreous china (VC), thus, contributing to urban waste decrease while lowering the industry’s buying costs, previously optimized, for the sanitaryware production. The recycled blend was introduced in the ceramic slip, Sanitser VC, and used in three
Cerâmica. Publicado em: 2021-03
-
17. Influence of sintering parameters on the microstructure and mechanical properties of nanosized 3Y-TZP ceramics
Abstract The fracture toughness of 3Y-TZP ceramics obtained from a nanocrystalline powder with an optimized microstructure and highly transformable tetragonal grains was investigated. Samples of ZrO2-3 mol% Y2O3 were sintered at temperatures between 1250 and 1400 °C, with isothermal holding times of up to 16 h. Samples sintered at 1250 °C exhibited relativ
Cerâmica. Publicado em: 2021-03
-
18. Response of rhizomes of the invasive Hedychium coronarium J. König (Zingiberaceae) to different soil moisture conditions
ABSTRACT The ability to maintain high competitiveness under a wide range of conditions is common among successful invasive species. The performance of rhizomatous macrophytes in different habitats is closely related to morphological and physiological adaptations in the rhizome system. We investigated the effects of soil moisture conditions on the microstruct
Acta Bot. Bras.. Publicado em: 2021-03
-
19. Microstructural and mechanical characterisation of the Simon Bolivar's iron bridge structure, 19th century, Arequipa, Peru
Abstract The microstructure of the main structural elements (Phoenix columns, transversal beams and tie-rods) of the Simón Bolivar iron bridge, located in Arequipa (Peru), was investigated. The bridge was supposedly designed by Gustave Eiffel and opened to the public in 1882. The characterisation revealed that the columns, beams and tie-rods are made of pud
REM, Int. Eng. J.. Publicado em: 2020-12
-
20. Comparative analysis of butter thermal behavior in combination with bovine tallow
Abstract Assessment of butter authenticity in combination with animal fat is a major challenge. Changing the butter composition can affect crystallization and polymorphism properties. The purpose of this study was to evaluate the thermal behavior of butter combined with (0-15% w/w) bovine tallow using Digital Calorimetric Scanning, and to determine fatty aci
Food Sci. Technol. Publicado em: 2020-12
-
21. Influence of drying methods on the physicochemical properties and nutritional composition of instant Tremella fuciformis
Abstract Instant Tremella fuciformis is ready to eat after adding hot water and is a delicious edible mushroom food. However, the drying method affects the quality of product. The present work evaluated the effects of freeze drying (FD), microwave drying (MD), and hot air drying (HAD) on shrinkage ratio, rehydration ratio, microstructure, polysaccharide and
Food Sci. Technol. Publicado em: 2020-09
-
22. Tear down academic paywall during pandemic
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
Braz. J. Biol.. Publicado em: 2020-09
-
23. Zinc Hexacyanoferrate/Multi-Walled Carbon Nanotubes Films for Rechargeable Aqueous Batteries
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
24. THEORETICAL UNDERSTANDING OF MORPHOLOGICAL DISTRIBUTION OF HYDROGEN IN AMORPHOUS CALCIUM SILICATE HYDRATE
Determining the morphological distribution of hydrogen atoms in calcium silicate hydrate phase (C-S-H) is of great concern but challenging. In this work, based on the stoichiometric composition of (CaO)1.7(SiO2)(H2O)1.8, a series of amorphous Ca1.7•Si•(O)3.7-x•(OH)2x•(H2O)1.8-x models are constructed using Monte Carlo method, where x represents the m
Quím. Nova. Publicado em: 20/07/2020