Microstructural
Mostrando 1-12 de 586 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Microstructural characteristics, properties, synthesis and applications of mullite: a review
Abstract Mullite, an intermediate phase of the binary alumina-silica system, is one of the most important phases of ceramic products containing alumina and silica in the initial composition. Its stoichiometry ranges from 3Al2O3.2SiO2 (3:2) to 2Al2O3.SiO2 (2:1) and its crystalline structure is orthorhombic, characterized by the presence of octahedral chains o
Cerâmica. Publicado em: 2022
-
3. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
4. Microbial activity and studies on excavated megalithic micaceous potsherds from Peninsular India
Abstract The abundantly available mica flakes were added in raw materials to manufacture pottery in Central Peninsular India during the early Iron Age (700-300 BCE) for storage and glittering. The micaceous potsherds from the excavated megalithic site of Nagpur were studied for their composition, manufacturing techniques, microstructural features, microbial
Cerâmica. Publicado em: 2021-06
-
5. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03
-
6. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys
Abstract The mechanical properties of age-hardenable aluminum alloys are strongly influenced by the volume fraction, size and spacing of hardening precipitates. In addition, researches have shown that interrupted ageing (T6I4) could benefit the hardening response of these alloys. Interrupted ageing is a term generally used for the microstructural developmen
REM, Int. Eng. J.. Publicado em: 2021-01
-
7. O Que Faz um Artigo ser Mais Citado?
Abstract The Guacuí and Batatal lineaments in the southern region of the state of Espírito Santo (southeastern Brazil) can be traced from satellite images for tens of kilometers. They are considered shear zones associated to the final tectonic stages of the Araçuaí-West Congo (A-WC) Orogen during the Ediacaran-Cambrian period. In order to understand thei
Rev. adm. contemp.. Publicado em: 2020-12
-
8. Structure and tectonic significance of high- and low-temperature deformation along the lateral escape-related Guaçuí and Batatal shear zones, southern Araçuaí Orogen (southeastern Brazil)
Abstract The Guacuí and Batatal lineaments in the southern region of the state of Espírito Santo (southeastern Brazil) can be traced from satellite images for tens of kilometers. They are considered shear zones associated to the final tectonic stages of the Araçuaí-West Congo (A-WC) Orogen during the Ediacaran-Cambrian period. In order to understand thei
REM, Int. Eng. J.. Publicado em: 2020-12
-
9. Microstructural and mechanical characterisation of the Simon Bolivar's iron bridge structure, 19th century, Arequipa, Peru
Abstract The microstructure of the main structural elements (Phoenix columns, transversal beams and tie-rods) of the Simón Bolivar iron bridge, located in Arequipa (Peru), was investigated. The bridge was supposedly designed by Gustave Eiffel and opened to the public in 1882. The characterisation revealed that the columns, beams and tie-rods are made of pud
REM, Int. Eng. J.. Publicado em: 2020-12
-
10. Discrimination of pores and cracks in iron ore pellets using deep learning neural networks
Abstract The discrimination between pores and cracks is an important step in the microstructural analysis of iron ore pellets. While the porosity is fundamental during the reduction process in blast furnaces, cracks are strongly detrimental to the mechanical strength. The usual image processing tools cannot automatically discriminate between these two types
REM, Int. Eng. J.. Publicado em: 2020-06
-
11. The Comparative Investigation of Corrosion and Passivation for X65 Carbon Steel in pH 1 to 5 HNO3 Solutions without and with 0.01 mol L-1 NaNO2
The influence of 0.01 mol L-1 NaNO2 addition on the corrosion and passivation of X65 carbon steel in pH 1 to 5 HNO3 solutions was investigated and compared by electrochemical methods and microstructural techniques. In the pH 1 to 5 solutions without NaNO2, the X65 steel presented the electrochemical characteristic of active dissolution, and the corrosion rat
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
12. Quantification of Discontinuities in Welded Joints Using Gamma Tomography
Gamma tomography was used in this work to evaluate the recurrent defects in welding processes in naval steel sheets. It was used a first-generation equipment consisting of a source of Cesium-137, with activity of the order of 200 mCi, coupled to a Thallium-doped Sodium Iodide detector, NaI (Tl). For the study, specimens were produced in ASTM A131-AH36 steel
Mat. Res.. Publicado em: 20/12/2019