Microstructural And Structural Characterization
Mostrando 1-12 de 30 artigos, teses e dissertações.
-
1. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
2. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03
-
3. Characterization of Li2O-Al2O3-SiO2 glass-ceramics produced from a Brazilian spodumene concentrate
Resumo Vitrocerâmicas do sistema LAS (Li2O-Al2O3-SiO2) com elevada resistência ao choque térmico foram obtidas com sucesso com o uso de um concentrado de espodumênio brasileiro como principal matéria-prima (80%-70% em massa). Duas composições (Li2O.Al2O3.nSiO2) foram produzidas com n= 2 e 4, próximas às composições estequiométricas das fases eucr
Cerâmica. Publicado em: 15/08/2019
-
4. Castor polyurethane used as osteosynthesis plates: microstructural and thermal analysis
Abstract Bone fractures to be corrected need stabilization of their extremities, which is achieved with the use of plates and screws. This research aimed to produce castor bean polyurethane (Ricinus communis), to make resorbable plate, structural and thermal analysis. The production was made by the glycerolysis of the triglycerides present in the oil, after
Polímeros. Publicado em: 04/07/2019
-
5. Evolution of magnetic response as a function of annealing temperature in Fe-based alloys
ABSTRACT The magnetic response, coercive force and magnetic induction, in Fe-10at.% Si, Fe-6at.% Al-9at.% Si and Fe-4at.% Al-8at.% Ge alloys as a function of the annealing temperature was determined and correlated to the microstructural state. The microstructural characterization was made through differential thermal analysis, mechanical spectroscopy and neu
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Comportamiento frente a la corrosión de uniones soldadas por fricción agitación de AA7075-T651: Evaluación galvánica
ABSTRACT Friction Stir Welding (FSW) is a novel solid-phase welding process, which has proved to have a great potential for the realization of welded joints in materials with poor weldability such as heat-treatable aluminum alloys. The aerospace industry has incorporated this process for the manufacture of structural elements, using known high strength alloy
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Effect of LZSA Glass-Ceramic Addition on Pressureless Sintered Alumina. Part II: Mechanical Behavior
This work aims to evaluate the influence of a Li2O-ZrO2-SiO2-Al2O3 (LZSA) glass-ceramic on the mechanical behavior of alumina. Composites were prepared from alumina with three different particle sizes and 7 to 21 vol% of an LZSA glass-ceramic composition (11.6Li2O-16.8ZrO2-68.2SiO2-3.4Al2O3,). Specimens were obtained by uniaxial pressing. The optimum sinteri
Mat. Res.. Publicado em: 19/10/2017
-
8. Microstructural characterization of the A356 alloy in different processing routes used in the thixoforming process
ABSTRACT This work aims to evaluate different routes of raw material production to be used in thixoforming process. The semisolid materials exhibit particular structural characteristics, such the characteristic non dendritic structure. The studies for the production of near-net-shape parts have progressed together with the studies of material weight reductio
Matéria (Rio J.). Publicado em: 02/10/2017
-
9. Characterization of Sn Doped ZnS Thin Films Synthesized by CBD
Zinc sulphide (ZnS) thin film were prepared using chemical bath deposition (CBD) process and tin (Sn) doping was successfully carried out in ZnS. Structural, morphological and microstructural characterization was carried out using XRD, TEM, FESEM and EDX. XRD and SAED pattern confirms presence of hexagonal phase. Reitveld analysis using MAUD software was use
Mat. Res.. Publicado em: 09/02/2017
-
10. Microstructural Characterization of As-Cast V-Si Alloys and Reevaluation of the Invariant Reactions Involving the Liquid Phase of the V-Si System
Alloys containing Me-Si-B (Me - Refractory Metal) are of great interest for high temperature structural applications and accurate knowledge of its low order systems (binaries and ternaries) is important to predict the phase relations in the multicomponent alloys. Recent reevaluations of binaries containing Me-Si found out that the accuracy of the description
Mat. Res.. Publicado em: 05/09/2016
-
11. Analysis of Dimension Stone Waste Addition to the Clayey Mass Used in Roof Tile Production
Addition of dimension stone waste to clayey mass is an alternative to make the dimension stone sector more environmentally sustainable and to reduce the consumption of clayey raw material. Our aim is to study the technical feasibility of dimension stone waste addition to the clayey mass used in roof tile production. Samples of waste and clay were tested for
Mat. Res.. Publicado em: 2015-12
-
12. Iron Doped-ZrSiO4: Structural, Microstructural and Vibrational Characterization
Fex-ZrSiO4 is known for the applications in the ceramic industry such as ceramic pigment. In this article, we focus our attention to the structural, microstructural and vibrational changes of Fex-ZrSiO4 from free-mineralizer precursors, treated at different temperatures in the range of 1100-1600 °C. The refinements of X-ray diffraction patterns show that Fe
Mat. Res.. Publicado em: 03/11/2015