Microstrain
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Microstructural Analysis of AgIn5VI8 (VI: S, Se, Te) Ternary Semiconductors by X-Ray Diffraction
This work is a study of the microstructural properties of the polycrystalline ternary compounds AgIn5S8, AgIn5Se8, and AgIn5Te8 by X-ray diffraction technique (XRD). The full-width-half-maximum (FWHM) of the XRD profile is measured as function of the diffraction angle and used to estimate the microstructural parameters. In general, a microstructural characte
Mat. Res.. Publicado em: 14/11/2019
-
2. Evolución microestructural de una aleación de aluminio A356 con y sin reforzamiento. de SiC sometida a molienda mecánica
ABSTRACT The effect of milling time on the crystallite size, microstrain and Vickers microhardness, of an aluminum alloy A356 (Al-7wt % Si) with and without SiC reinforcement (15 wt%) was studied. The metal alloy powders were obtained by the rotating electrode process (REP) from cylinders of the alloy, the obtained powders present spherical morphology with a
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Characterization of Sn Doped ZnS Thin Films Synthesized by CBD
Zinc sulphide (ZnS) thin film were prepared using chemical bath deposition (CBD) process and tin (Sn) doping was successfully carried out in ZnS. Structural, morphological and microstructural characterization was carried out using XRD, TEM, FESEM and EDX. XRD and SAED pattern confirms presence of hexagonal phase. Reitveld analysis using MAUD software was use
Mat. Res.. Publicado em: 09/02/2017
-
4. Stress analysis of different configurations of 3 implants to support a fixed prosthesis in an edentulous jaw
This study's aims was to evaluate the stress distribution in a mandibular implant-supported prosthesis and peri-implant bone considering implant quantity, diameter and position using linear 3-D finite element analysis. Models of an anterior jaw comprised 4 groups according to implant quantity, diameter, and position: control group C, 5 regular implants; R, 3
Braz. oral res.. Publicado em: 25/11/2013
-
5. âNova rota de sÃntese de nanopartÃculas de NiMn2O4 usando o MÃtodo Sol-Gel ProtÃicoâ / "New route of synthesis nanoparticles NiMn2O4 method using sol-gel protein."
This work presents a new route for the synthesis of nickel manganate (NiMn2O4) through the sol-gel protein method, using gelatin as an organic precursor. The synthesis of nanoparticles was performed by dilution of inorganic salts (NiCl2.6H2O, MnCl2.4H2O) and gelatin in distilled water with the addition of sodium hydroxide (NaOH). This solution was then place
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/01/2011
-
6. Machined and plastic copings in three-element prostheses with different types of implantabutment joints: a strain gauge comparative analysis
OBJECTIVE: Using strain gauge (SG) analysis, the aim of this in vitro study was quantify the strain development during the fixation of three-unit screw implant-supported fixed partial dentures, varying the types of implant-abutment joints and the type of prosthetic coping. The hypotheses were that the type of hexagonal connection would generate different mic
Journal of Applied Oral Science. Publicado em: 2010-06
-
7. Análisis de perfiles de difracción de rayos X de una aleación Cu-8% en peso de Cr obtenida por medio de aleado mecánico
This work studies the evolution of the microstrucutre of a mechanically alloyed Cu-8 wt. % Cr powder mixture by X-Ray profiles analysis. The process was carried out using a SPEX8000D upon mix with stainless steels containers and balls, keeping a constant powder to balls weight ratio of 10. Increasing the milling time, crystallite size and stacking fault ener
Matéria (Rio de Janeiro). Publicado em: 2009-08
-
8. Mecanismos de ativação mecânica de misturas de Níobio e Alumínio para a síntese por reação do NbAl3 / Mechanical activation mechanisms of niobium and aluminium mixtures for the reaction synthesis of NbAl3
In this work, mechanical activation of mixtures of niobium and aluminum powders (75 at.% of Al) was carried out by high energy ball milling, in order to produce NbAl3 by combustion synthesis. The purpose was to investigate activation mechanisms present and the eventual preponderancy of one of them. Beside mixtures, aluminum and niobium powders were separatel
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/03/2008
-
9. Síntese, estudo cinético e análise microestrutural do sistema cério-níquel obtido pelo método pechini
The cerium oxide has a high potential for use in removing pollutants after combustion, removal of organic matter in waste water and the fuel-cell technology. The nickel oxide is an attractive material due to its excellent chemical stability and their optical properties, electrical and magnetic. In this work, CeO2-NiO- systems on molars reasons 1:1(I), 1:2(II
Publicado em: 2008
-
10. In vitro evaluation of the precision of working casts for implant-supported restoration with multiple abutments
OBJECTIVE: The purpose of this study was to compare the accuracy of two working cast fabrication techniques using strain-gauge analysis. METHODS: Two working cast fabrication methods were evaluated. Based on a master model, 20 working casts were fabricated by means of an indirect impression technique using polyether after splinting the square transfer coping
Journal of Applied Oral Science. Publicado em: 2007-06
-
11. Influência da extensão e tipo de retentor intra-radicular na deformacão e resistência à fratura de dentes tratados endodonticamente
Studies concerning the effects of different post systems insertion depth on the strain and fracture resistance of endodontically treated teeth remain controversial. The purpose of this study was to investigate in vitro the effects of different post systems and depth of post insertion on the strain and fracture resistance of endodontically treated bovine inci
Publicado em: 2007
-
12. Effect of the Addition of Potassium or Lithium on the Columbite Precursor Microstructure
Pechini method has been used to synthesize MN powders with stoichiometric control. By this method, K and Li-doped MN in the range from 0.1 to 5.0 mol% of dopants have been obtained at relatively lower temperatures than it is possible with the conventional mixture of oxides. The results from BET analysis indicated that the doped powders have lower surface are
Materials Research. Publicado em: 2002-10