Microfiltration
Mostrando 1-12 de 76 artigos, teses e dissertações.
-
1. Adhesiveness of bulk-fill composite resin in permanent molars submitted to Streptococcus mutans biofilm
Abstract: The aim of the present study was to evaluate the microtensile bond strength and the microleakage of a bulk-fill composite resin compared with a conventional incremental composite resin, in permanent molars and under cariogenic challenge using a Streptococcus mutans model. Permanent human third molars (n = 60) with an occlusal cavity of 5×3×2 mm w
Braz. oral res.. Publicado em: 02/12/2019
-
2. Fabrication and characterization of low cost ceramic membranes for microfiltration of Acutodesmus obliquus using modified clays
RESUMO Membranas de microfiltração em cerâmica tubular foram preparadas por extrusão de misturas de argilas naturais (NC) e argilas tratadas termicamente (TC) em diferentes frações com a adição de amido de mandioca catiônico. Estudos anteriores verificaram que membranas contendo TC possuíam maior permeabilidade hidráulica e fluxo permeado do que a
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Mecanismos de queda do fluxo em membranas de microfiltração de poliéterimida aplicadas à clarificação de água produzida sintética
RESUMO Membranas de microfiltração de poliéterimida foram preparadas pelo método de inversão de fases para controlar a espessura, porosidade e tamanho de poros dos filmes. 1-metil-2-pirrolidona foi utilizada como solvente e água como não solvente. As propriedades das membranas foram avaliadas por meio de microscopia eletrônica de varredura, microfilt
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019
-
5. Avaliação de parâmetros operacionais de um sistema de membranas para tratamento de efluentes oleosos
RESUMO O objetivo deste trabalho foi discutir os principais parâmetros de controle de um sistema de membranas de microfiltração para remoção de óleo de efluentes com base em ensaios experimentais. Os ensaios utilizaram efluentes sintéticos com diâmetros de gotas de óleo entre 4 e 8 µm. As membranas usadas foram do tipo fibra oca com módulo submers
Eng. Sanit. Ambient.. Publicado em: 26/08/2019
-
6. Efeito da temperatura de sinterização e da adição de fibras poliméricas em cerâmica porosa obtida a partir de resíduos do processo Kraft
Resumo O processo Kraft gera resíduos que podem ser aplicados em diversos processos produtivos, substituindo matérias-primas comerciais, como lama de cal e areia, ricos em carbonato de cálcio e sílica, respectivamente. Neste trabalho foi realizado um estudo para obtenção de cerâmicas porosas a partir da valorização desses resíduos, utilizando-se fi
Cerâmica. Publicado em: 15/08/2019
-
7. Sustainable alternative for the food industry: converting whey and orange juice into a micro-filtered beverage
ABSTRACT: Enhancing industrial sustainability by converting whey into alternative high value-added products is a scientific trend in food science and technology. However, without other ingredients, rennet, or sour, whey has an unappetizing flavor. This sensory challenge can be overcome by blending it with citrus flavor from orange juice. This study assessed
Sci. agric. (Piracicaba, Braz.). Publicado em: 2018-04
-
8. Evaluation of membrane microfiltration fouling in landfill leachate treatment
ABSTRACT The membrane separation capacity allows the retention of the remaining organic matter that could not be removed by the biological process, increasing the treatment efficiency. The aim of this study was to evaluate the microfiltration (MF) process in a tertiary treatment system for landfill leachate from the Rincão das Flores, Caxias do Sul/RS/Brazi
Matéria (Rio J.). Publicado em: 05/03/2018
-
9. Evaluation of mass transfer in a novel hollow fiber module design using an electrochemical technique
Abstract The mass transfer coefficient (K L ) determined using an electrochemical technique was used in this work as a parameter to evaluate the hydrodynamics of hollow fiber membrane modules. A new microfiltration module configuration was investigated, taking advantage of the hydrocyclone concept aimed at reducing the concentration of the polarization laye
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
10. MICROFILTRATION AND ULTRAFILTRATION OF Bacillus thuringiensis FERMENTATION BROTH: MEMBRANE PERFORMANCE AND SPORE-CRYSTAL RECOVERY APPROACHES
Abstract Recovery of spores and crystals from the fermentation broth of Bacillus thuringiensis (Bt) was studied using the membrane separation technology. Four types of polymeric membranes, with different characteristics, in the range of microfiltration (MF) and ultrafiltration (UF) were used for evaluating their permeate flux and spore-crystal recovery capac
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
11. DEVELOPMENT OF A NEW PROCESS FOR PURIFICATION OF CAPSULAR POLYSACCHARIDE FROM Streptococcus pneumoniae SEROTYPE 14
Abstract The main virulence factor of Streptococcus pneumoniae is the capsular polysaccharide (PS), which is the antigen of all current vaccines that are prepared with PS purified from serotypes prevalent in the population. In this work, three purification strategies were evaluated and a new process was developed for purification of serotype 14 PS (PS14), re
Braz. J. Chem. Eng.. Publicado em: 2016-09
-
12. Characterization of Mullite Ceramic Membranes and their Application in the Removal Escherichia Coli
This paper aims the morphological and structural characterization of ceramic membranes of mullite and their application in the removal of Escherichia coli. A complex irregular structure presented by the pores of the membrane was verified by scanning electron microscopy (SEM). The average pore size and distribution were determined by mercury intrusion porosim
Mat. Res.. Publicado em: 05/04/2016