Micro Tensile
Mostrando 1-12 de 53 artigos, teses e dissertações.
-
1. CANTILEVER NANOBIOSENSOR BASED ON THE ENZYME UREASE FOR DETECTION OF HEAVY METALS
Abstract Cantilever nanobiosensors have emerged as an alternative to conventional methods of analysis to monitor heavy metals, which are being highlighted by detecting substances at the micro and nanoscale through the use of sensor layers. In the present study, a new cantilever nanobiosensor was developed functionalized with urease enzyme by self-assembled m
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Caracterização Mecânica da Região Soldada de Tailor Welded Blanks (TWB) a Partir do Perfil de Microdureza
Resumo No Tailor Welded Blank (TWB) são soldadas chapas de especificações distintas, antes da conformação. Sua caracterização, na região soldada, por métodos convencionais de tração, pode ser dificultada pelo estreito comprimento da solda. Novas metodologias e alternativas são analisadas. Este trabalho visou caracterizar mecanicamente a região s
Soldag. insp.. Publicado em: 02/12/2019
-
3. Mechanical behavior of PVD coatings deposited on ADI
ABSTRACT In this work, the mechanical behavior of the coated ADI system is studied. For this purpose, single layer Ti and bilayer Ti/TiN and TiAl/TiAlN coatings, with different thicknesses, were deposited by the PVD technique of cathodic arc deposition on high strength ADI substrates using industrial and experimental devices. The characterization of the coat
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Evaluation of the stiffening mechanism based on micro-sized particle inclusions in laminated composites
Rigid particles have been incorporated into laminated composites, especially to enhance their bending performance attributed to the stiffening of the matrix phase (i) and the increased interlaminar shear resistance (ii). In order to better evaluate the improvement mechanism provided by the particulate inclusions, this work investigates the incorporation of m
Mat. Res.. Publicado em: 17/10/2019
-
5. Estudo dos Parâmetros de União por Difusão do Aço Inoxidável AISI 316L
Resumo A união por difusão é uma técnica de união no estado sólido capaz de ligar dois materiais metálicos por meio da difusão atômica na interface de contato, sem o uso de metal de adição. Este processo é adequado para a união de grandes áreas com uma alta resistência mecânica, permitindo ao equipamento operar com elevadas pressões de traba
Soldag. insp.. Publicado em: 16/05/2019
-
6. Influence of Forging Pressure on Microstructural and Mechanical Properties Development in Linear Friction Welded Al-Cu Dissimilar Joint
Abstract Dissimilar AA5083 and C101 pure copper linear friction welds were prepared using different forging pressures (60 MPa, 80 MPa, and 110 MPa) to investigate the influence of the forging pressure on the microstructural and mechanical properties development using optical microscopy (OM), scanning electron microscopy (SEM), hardness measurements, and ten
Soldag. insp.. Publicado em: 18/04/2019
-
7. Optimization of Multiple Performance Characteristics of Friction Stir Welded Joint with Grey Relational Analysis
In the present work, multi-objective optimization of the input welding parameters influencing the quality of weld joint of AA 5052 H32 aluminium alloy by FSW process is investigated using response surface methodology and grey relational analysis. The quality of the welded joint is measured based on the higher value of tensile strength and hardness of the joi
Mat. Res.. Publicado em: 08/11/2018
-
8. Effect of Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Cast Nickel Aluminum Bronze Alloy (C95800)
In the present study, Friction Stir Welding (FSW) of Nickel Aluminum Bronze (NAB) alloy was carried out by varying the axial load, rotation speed and welding speed rate. Micro-structural analyses of these samples revealed the different grain sizes and shapes of the various zones. Hardness and tensile strength tests were carried out for the samples welded at
Mat. Res.. Publicado em: 24/05/2018
-
9. Effect on adhesion of a nanocapsules-loaded adhesive system
Abstract This study aimed to evaluate the in situ degree of conversion, contact angle, and immediate and long-term bond strengths of a commercial primer and an experimental adhesive containing indomethacin- and triclosan-loaded nanocapsules (NCs). The indomethacin- and triclosan-loaded NCs, which promote anti-inflammatory and antibacterial effects through co
Braz. oral res.. Publicado em: 01/02/2018
-
10. Effect of Heat Treatments and SiC Content in the Mechanical Properties and Microstructure of Self-Lubricating Steels
The objective of the present work was to study the effect of heat treatments in the microstructure, graphite nodules and mechanical properties of self-lubricating steels, to achieve this, self-lubricating steels (Fe + 0.45C + 4Ni + 1Mo %wt) and additions of 2 and 3 %wt SiC were fabricated. They were consequently heat treated in 3 different conditions: martem
Mat. Res.. Publicado em: 09/11/2017
-
11. Tensile Behaviour and Durability Issues of Engineered Cementitious Composites with Rice Husk Ash
ABSTRACT The Engineered Cementitious Composites (ECC) is a special type of High Performance Fibre Reinforced Cementitious Composite (HPFRCC) characterized by a high tensile ductility with a 2% maximum volume of micro fibres. ECC has a tensile strain-hardening performance that leads to multiple cracking behaviour, thus providing the high ductility to the conc
Matéria (Rio J.). Publicado em: 20/07/2017
-
12. Mechanical and Corrosion Behavior of Al7075 (Hybrid) Metal Matrix Composites by Two Step Stir Casting Process
Abstract This paper investigates the mechanical properties and corrosion behavior of Metal Matrix Composites prepared using Al7075 alloy as a matrix, Silicon Carbide and Titanium Carbide as reinforcement particles. Two step stir casting process was used to fabricate the composites by varying volume fractions of Silicon Carbide and Titanium Carbide (0 to 15 v
Lat. Am. j. solids struct.. Publicado em: 2017-02