Micro Porous Materials
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. Two-scale topology optimization of macrostructure and porous microstructure composed of multiphase materials with distinct Poisson’s ratios
Abstract Negative Poisson’s ratio (NPR) material attracts a lot of attentions for its unique mechanical properties. However, achieving NPR is at the expense of reducing Young’s modulus. It has been observed that the composite stiffness can be enhanced when blending positive Poisson’s ratio (PPR) material into NPR material. Based on the respective inter
Lat. Am. j. solids struct.. Publicado em: 29/11/2018
-
2. Nano and Micro Ceramic Membranes from Degradable Templates
Abstract The nano/microstructures with highly porous surface area have attracted tremendous attention, particularly the synthesis and tailoring of porous and hollow materials of high performance. In this paper, an easy method of cost-effective synthesis of hollow ceramic fiber membranes based on Hydroxyapatite, TiO2 and ZrO2 stabilized with Yttrium, is propo
Mat. Res.. Publicado em: 28/07/2016
-
3. Processing and characterization of dual phase steel foam
Porous materials featuring cellular structures are known to have many interesting combinations of physical and mechanical properties. Some of them have been extensively used in the transportation field (i.e. balsa wood). Steel foams presented promising theoretical properties for both functional and structural applications in transportation, but processing of
Matéria (Rio de Janeiro). Publicado em: 2010
-
4. Preparação de carbonos porosos por moldagem sequencial
Porous carbons have received great attention because of their potential use as adsorbents, sensors, catalytic supports and others. Among the available methods for preparing these solids, the sequential templating emerges as an efficient way to tail carbon materials, with large specific surface areas, high porosity, controlled narrow pore size distribution an
Química Nova. Publicado em: 2009
-
5. Um estudo sobre condutividade térmica efetiva em materiais micro-porosos utilizando o Método dos Elementos de Contorno / A study about effective thermal conductivity in micro-porous materials using the boundary element method
O trabalho apresenta um estudo sobre a condutividade térmica efetiva de materiais microporosos em duas dimensões. O Método dos Elementos de Contorno (MEC) é empregado para resolver as equações diferenciais que regem os problemas potenciais em regime permanente. A metodologia desenvolvida é aplicada a micro-estruturas com furos dispersos em sua matriz.
Publicado em: 2009
-
6. Compósitos cerâmicos porosos de alumina - zircônia para aplicação em sistemas de controle térmico para satélites: obtenção e caracterização / Alumina-zirconia porous ceramic composites for application in satellite thermal control systems: obtaining and characterization
To control the temperature of satellites are used various thermal control heat systems. The Loop Heat pipe (LHP) are being developed at the DEM (Space Mechanic and Control Division) of the INPE (National Institute for Space Research) an apparatus for passive heat control of the satellites components. The main components of the LHP system are: capillary evapo
Publicado em: 2008
-
7. Estudo do comportamento ao desgaste e corrosÃo dos aÃos inoxidÃveis AISI 316L e AISI 420 depositados pelo processo de aspersÃo tÃrmica a arco elÃtrico
Mechanical components behavior in service, are extremely dependent on the surface quality, the contact between areas and the environment where they are applied. Particularly, corrosion and ware damage, directly and indirectly, mechanical components surface that result in rise production and maintenance cost due to no programmed equipments stops to repair or
Publicado em: 2007
-
8. Estudo da regeneração de aditivos para catalisadores de craqueamento aluminofosfatos (ALPOs)e silicoaluminofosfatos (SAPOs)
Heterogeneous catalysts such as aluminophosphate and silicoaluminophosphate, molecular sieves with AEL of ALPO-11 and SAPO-11, were synthesized by the hydrothermal method with the following molar composition: 2.9 Al +3.2 P + 3.5 DIPA +32.5 H20 (ALPO-11); 2.9 Al +3.2 P + 0.5 Si + 3.5 DIPA +32.5 H20 (SAPO-11) starting from silica (only in the SAPO-11), pseudob
Publicado em: 2007
-
9. Modelagem e projeto computacional de materiais micro-porosos com distribuição aleatória utilizando uma formulação de elementos de contorno / Computational Modeling and Design of Random Micro-porous Materials Using a Boundary Element Formulation / Modelado y Diseño Computacional de Materiales Micro-porosos con Distribución Aleatoria Utilizando una Formulación de Elementos de Contorno
Este trabalho apresenta uma Formulação de Elementos de Contorno para a modelagem em duas dimensões de microestruturas multi-fase que contêm furos e inclusões cilíndricas de raio variável, baseada nos trabalhos de Henry & Banerjee, 1991 e Banerjee & Henry, 1992 para sólidos tridimensionais. Na presente formulação, a inomogeneidade não é discretiza
Publicado em: 2007
-
10. Modelagem computacional micromecânica em poroviscoelasticidade
Neste trabalho propomos uma nova formulação micromecânica para descrever escoamentos monofásicos em meios porosos viscoelásticos. Na abordagem proposta consideramos o meio poroso por dois níveis de porosidade (micro e macroporos), onde os efeitos de relaxação e fluência da matriz porosa são advindos da drenagem secundária do fluido residente nos m
Publicado em: 2006