Metal Construction
Mostrando 1-12 de 76 artigos, teses e dissertações.
-
1. NANOMATERIAIS PLASMÔNICOS: PARTE I. FUNDAMENTOS DA ESPECTROSCOPIA DE NANOPARTÍCULAS E SUA RELAÇÃO COM O EFEITO SERS
We perform an analysis of plasmonic nanomaterials in a two part review, the first of which constitutes the present work. Here, attention is given to the fundamentals of metal nanoparticle optical properties. It is discussed the principles regarding the excitation of localized surface plasmon modes in nanostructures of different sizes, shapes and surrounding
Quím. Nova. Publicado em: 2020-12
-
2. CONSTRUCTION AND TESTING OF GLUED LAMINATED TIMBER FRAMES FOR USE IN LAYING POULTRY HOUSES
ABSTRACT This study aimed to present a solution in glued laminated timber to replace frame structures built in reinforced concrete and metallic structure, which are common in agricultural buildings in western Paraná such as those destined to laying poultry house building by agricultural cooperatives. Structural behavior of frames build from Araucaria angust
Eng. Agríc.. Publicado em: 2020-04
-
3. Monitoring the content of ethyl carbamate and copper in organic and conventional cachaça
ABSTRACT: Ethyl carbamate (EC) (NH2COOCH2CH3) is found in cachaça, and its presence in the beverage is conspicuous for its toxicity. Copper, the metal of choice used in the construction of stills, is also considered a beverage contaminant and is often related to the presence of EC in beverages. The study aimed to monitor the quality of cachaça by measuring
Sci. agric. (Piracicaba, Braz.). Publicado em: 20/12/2019
-
4. Ensaio não destrutivo em revestimento cerâmico utilizando um protótipo para detecção de patologia
RESUMO No setor da construção civil há um crescente investimento na manutenção e reparo das construções, como por exemplo, as patologias encontradas nos pisos com revestimento cerâmico. Dentre as patologias mais comuns se pode destacar o assentamento inadequado das placas cerâmicas, que são caracterizadas pela perda de aderência de algumas placas
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. Quality analysis of galvanized pipes applied to natural gas installations in civil construction
ABSTRACT Some natural gas distributors for residential and commercial buildings in Brazil use galvanized steel tubes and fittings manufactured by the hot-dip zinc process that are supported by the specifications contained in the Brazilian Standards. Zinc coating is one of the most widely used methods to provide protection against corrosion. It is therefore e
Matéria (Rio J.). Publicado em: 10/06/2019
-
6. Solidification Furnace Developed for Sounding Rockets: Rio Verde Mission
ABSTRACT Brazil has a Microgravity Program mainly based on experiments using sounding rockets. Up to now, four missions have been carried out with approximately 35 experiments submitted in total. In all flights, the Associate Laboratory of Sensors and Materials of the Brazilian Space Research Institute (LABAS/INPE) participated with a fast solidification fur
J. Aerosp. Technol. Manag.. Publicado em: 03/06/2019
-
7. Esfuerzo de corte en Interfaces Fe/Fe3O4
Abstract The mechanical stability of oxides formed on metallic alloys is a key concern in the determination of component susceptibility to the medium in contact and the applicability of the alloy to high temperatures and other extreme conditions. In this context, the energy of adhesion is a key parameter. Density functional Theory (DFT) and other atomistic m
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Optimización de un procedimiento para la determinación de oro mediante espectrofotometría UV/Vis
ABSTRACT The main objective of the research group is the recovery of valuable metals (contained in PCB’s) such as Cu, Au, Ag, Pt, Pd, etc., by hydrometallurgical alternatives to the current ones used in mining. One of the biggest difficulties that has encountered the research group is the lack of availability of an adequate, simple and reliable quantitativ
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Numerical analysis of the liquid ejection due to the gaseous jet impact through computational fluid dynamics
Abstract Metal droplets generated by an impinging jet, play an important role in metal refining processes, mainly in oxygen steelmaking, where the droplets are ejected into the slag phase. Since the available interfacial area of droplets is very high in this process, the generated droplets enhance the rates of heat transfer and chemical reactions. Therefore,
REM, Int. Eng. J.. Publicado em: 2018-03
-
10. THERMAL ENVIRONMENT OF TABLE GRAPE PACKING HOUSES IN THE SÃO FRANCISCO VALLEY
ABSTRACT The aim of this study was to characterize the thermal environment of the sorting and packing sectors of small, medium and large packing houses in the São Francisco Valley, Northeast of Brazil. Micrometeorological data were monitored every 15 minutes for 20 days during winter 2014 and summer 2015. The parameters evaluated were air temperature (°C),
Eng. Agríc.. Publicado em: 2017-02
-
11. Comportamiento a la Corrosión del Acero API X70 Soldado por el Proceso de Doble Arco Sumergido Inmerso en Diferentes Medios Corrosivos
Abstract The steels API X70 are applied in construction and fabrication of pipeline for transport of hydrocarbons, however, to lapse time are degrade due to environment to which are exposed, influencing on mode and corrosion rate on surface base metal (BM), heat zone affected (HAZ) and fusion zone (FZ). In order to know and evaluate the corrosion susceptibi
Soldag. insp.. Publicado em: 2016-06
-
12. Construction of a New Aluminum(III) Cation Selective Electrode Based on 12-Crown-4 as an Ionophore
This article describes the fabrication of a novel and selective polyvinylchloride (PVC) membrane potentiometric sensor for Al3+ cation based on 12-crown-4 (12C4) as an ionophore. The electrode was prepared by coating the surface of a graphite rod by a membrane containing PVC as a plastic matrix, dibutylphthalate (DBP) as plasticizer, 12C4 as an ionophore and
J. Braz. Chem. Soc.. Publicado em: 2015-05