Metal Composite
Mostrando 1-12 de 142 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. An Efficient and Recyclable Sn-Based Phosphotungstic Acid with Tunable Brønsted/Lewis Acidity for Selective Oxidation of Benzyl Alcohol
A series of metal ion (M = Sn2+, Fe3+, Ni2+, Co2+, Ag+, Cu2+) exchanged tungstophosphoric acid (H3PW12O40; TPA) catalysts with tunable Brønsted/Lewis acidity were synthesized and exploited for the oxidation of benzyl alcohol (BzOH) to benzaldehyde (BzH) using hydrogen peroxide (H2O2) as oxidant. The structure of these M-TPA composite salts was also characte
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
3. Analysis of enamel and material wear by digital microscope: an in-vitro study
Abstract: The objective of the study was to analyze the surface area (SA) of the wear caused by simulated chewing on human enamel and opposing restorative material, namely: composite resin (CR), porcelain fused to metal (PFM), lithium disilicate (LD), or monolithic zirconia (MZr). Forty-eight premolars were selected as enamel specimens and divided randomly i
Braz. oral res.. Publicado em: 10/01/2020
-
4. Influence of hydrofluoric acid etching time and concentration on shear bond strength of metal brackets to ceramic surfaces
Resumo Introdução O tratamento de superfície prévio a colagem de braquetes a cerâmica com ácido fluorídrico, é indicado devido a sua capacidade de promover alterações morfológicas necessárias para a adesão. Objetivo Avaliar a resistência de união ao cisalhamento (RUC) de braquetes metálicos unidos à superfície cerâmica feldspática sob a
Rev. odontol. UNESP. Publicado em: 13/12/2019
-
5. Preparation and characterization of yttria stabilized zirconia (YSZ) films deposited by dip-coating on LSM-YSZ substrate with different proportions
ABSTRACT In this work, sol-gel/dip-coating process for obtaining yttria stabilized zirconia (YSZ, ZrO2–8% Y2O3) films deposited onto LSM-YSZ (lanthanum strontium manganite (LSM, La0.7Sr0.3MnO3) mixed with YSZ) with different proportions (20/80, 50/50, 80/20) was investigated. The films were deposited on substrate varying the number of layers deposited. LSM
Matéria (Rio J.). Publicado em: 25/11/2019
-
6. Experimental evaluation on the structural behavior of truss shear connectors in composite steel-concrete beams
Resumo As estruturas mistas apresentam grandes vantagens quanto a aspectos estruturais e construtivos, sendo os conectores de cisalhamento determinantes para a obtenção da interação entre os elementos estruturais e para a distribuição dos esforços na estrutura, aproveitando-se de forma efetiva da potencialidade de cada material constituinte da estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
7. DESENVOLVIMENTO DE METODOLOGIA DE REVELAÇÃO DE IMPRESSÃO DIGITAL LATENTE COM CHALCONAS
Fingerprints are unique for each individual contributing to human identification in forensic cases. Visualization of latent fingerprints usually involves the use of a chemical substance that creates a contrast between fingerprint residues and the surface on which the print was deposited. Commercial powders used as fingerprint developers by papilloscopy have
Quím. Nova. Publicado em: 21/10/2019
-
8. Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
ABSTRACT Zirconia (ZrO2) dispersed aluminum alloy metal matrix composites produced by stir casting techniques. Using stir casting techniques, aluminium based composites with varying amounts of 3%, 6%, 9%, and 12% of zirconia by weight are fabricated. The prepared samples were subjected to physical, mechanical,tribiology and microstructure investigation. The
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Evaluation of a Metal-Organic Composite (Tungsten-Lignin) for Attenuation of Gamma Radiation
The objective of this work was to use tungsten and lignin as precursors to obtain a metal-organic composite tungsten-lignin (W-Lig) using different sintering temperatures. Tungsten is a refractory metal and it was selected for the composite since it is widely used for high-energy radiation shielding as it has an excellent absorption cross section for thermal
Mat. Res.. Publicado em: 02/09/2019
-
10. Hydrothermal Synthesis to Water-stable Luminescent Carbon Dots from Acerola Fruit for Photoluminescent Composites Preparation and its Application as Sensors
Carbon dots (C-dots) possess the attractive properties of high stability, low toxicity, good water solubility, simple synthetic routes as well as size and excitation-dependent photoluminescence (PL).The aim of this work was to synthesize photoluminescent C-dots by hydrothermal method using acerola fruit (Malpighiaemarginata) as a row material, since this fru
Mat. Res.. Publicado em: 06/06/2019
-
11. Microstructure and Wear Resistance of ZrC-ZrB2 /Ni Composite Coatings Prepared by Plasma Transferred Arc Cladding
The ZrC-ZrB2/Ni metal matrix composite coatings were in-situ synthesized from a mixture of Ni, Zr and B4C by plasma transferred arc (PTA) cladding process. Microstructures and phase constituents of the coatings were characterized by electron probe micro-analyzer (EPMA) and X-ray diffraction (XRD). Microhardness and wear resistance of the coatings were system
Mat. Res.. Publicado em: 06/05/2019
-
12. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019