Metal Casting
Mostrando 1-12 de 70 artigos, teses e dissertações.
-
1. Dimensional Stability of Casts Derived from Three Types of Alginate at Different Times After Impression
Abstract Objective: To evaluate the dimensional changes in three types of alginate following three different delay times after casting. Material and Methods: In this laboratory study, a maxillary arch-shaped stainless steel model was prepared and three pins with similar and determined diameters and heights were placed (one at mid-line and two on the unders
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 10/10/2019
-
2. Effect of Squeeze Casting on Microhardness and Microstructure of Al-3Cu-xSi Alloy
Aluminum alloys of the ANSI series 319 present Si and Cu as the main alloying elements and the mechanical strength of these alloys can be improved by the precipitation of the metastable Al2Cu phase. Squeeze Casting is a casting process in which the cast metal is deposited in a metal mold and solidified under certain pressure exerted by a punch. This process
Mat. Res.. Publicado em: 30/09/2019
-
3. Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
ABSTRACT Zirconia (ZrO2) dispersed aluminum alloy metal matrix composites produced by stir casting techniques. Using stir casting techniques, aluminium based composites with varying amounts of 3%, 6%, 9%, and 12% of zirconia by weight are fabricated. The prepared samples were subjected to physical, mechanical,tribiology and microstructure investigation. The
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. The Effect of Casting Speed and the Fraction of Al5%Ti1%B Inoculant on the Microstructure and Mechanical Properties of the AA5052 Aluminum Alloy Produced by the Direct Chill Process
This study aimed to assess the effect of casting speed and the addition of Al5%Ti1%B inoculant in the casted AA5052 aluminum alloy plate manufactured by the Direct Chill process. The focus of this work was to decrease the rejection index of rolled products due to the occurrence of superficial flaws on plates. These defects impact directly on the production c
Mat. Res.. Publicado em: 01/02/2018
-
5. Chemical and mineralogical characterization of silicon manganese iron slag as railway ballast
Abstract In nature, metal ores such as iron, lead, aluminum and others are found in an impure state, sometimes oxidized and mixed with silicates of other metals. During casting, when the ore is exposed to high temperatures, these impurities are separated from the molten metal and can be removed. The mass formed by these compounds is slag. Slag is the co-prod
REM, Int. Eng. J.. Publicado em: 2017-12
-
6. Effect of Processing Route on the Microstructure and Mechanical Properties of Hot Work Tool Steel
Powder metallurgy is a growing sector in industrial production, as it offers outstanding energy, cost and material savings in comparison with established processing routes such as casting. Hot work toll steels are usually produced by ingot metallurgy, but also by powder metallurgy, namely hot isostatic pressing and powder forging routes. In this paper we inv
Mat. Res.. Publicado em: 21/08/2017
-
7. Influence of casting heterogeneities on microstructure and mechanical properties of austempered ductile iron (ADI)
ABSTRACT An investigation was carried out to examine the influence of as-cast heterogeneities on the resulting microstructure and mechanical properties of an austempered ductile cast iron (ADI). A commercial hypereutectic ductile iron alloy with 3.59% C, 2.68% Si, 0.24% Mn and 0.46% Cu (in wt. %) was produced in a coreless induction furnace. The specimens we
Matéria (Rio J.). Publicado em: 10/08/2017
-
8. Weldability Study of LM25/ZrO2 Composites by Using Friction Welding
ABSTRACT In this paper aluminum (LM25) alloy was chosen as a base matrix metal, and it was reinforced with 0, 3, 6, 9, 12% of Zirconium dioxide (ZrO2) particulates based on weight fraction method. Stir casting method was used to cast LM25/ZrO2 composite material. The cast samples were subjected to physical and mechanical test viz, density, hardness, tensile,
Matéria (Rio J.). Publicado em: 10/08/2017
-
9. Mechanical and Corrosion Behavior of Al7075 (Hybrid) Metal Matrix Composites by Two Step Stir Casting Process
Abstract This paper investigates the mechanical properties and corrosion behavior of Metal Matrix Composites prepared using Al7075 alloy as a matrix, Silicon Carbide and Titanium Carbide as reinforcement particles. Two step stir casting process was used to fabricate the composites by varying volume fractions of Silicon Carbide and Titanium Carbide (0 to 15 v
Lat. Am. j. solids struct.. Publicado em: 2017-02
-
10. Effect of Cryogenic Chill on Mechanical Properties of ASTM A 494 M Grade Nickel Based Alloy Metal Matrix Composites
An investigation in the present research was made to fabricate and evaluate the microstructure and mechanical properties of metal matrix composites developed using cryogenically cooled copper chills, consisting of ASTM A 494 M grade nickel alloy matrix and garnet particles as the reinforcement. The particle's amount added ranges from 3 wt. % to 12 wt. % in s
Mat. Res.. Publicado em: 26/09/2016
-
11. Pores distribution statistical analysis for metal foams obtained by casting-dissolution process
ABSTRACT Interesting properties of metal foams such as light weight, good energy absorption and low thermal conductivity, have promoted the development of new processes to improve properties without sacrificing productivity. This study aims to verify the uniformity pore distribution in an aluminum alloy foam obtained by Casting - Dissolution Process, using a
Matéria (Rio J.). Publicado em: 2016-06
-
12. Chemically Collapsible Mandrel for Solid Rocket Motor Processing
ABSTRACT: Composite propellant mainly consists of two parts, binder matrix (prepolymer, plasticizer, cross linker, antioxidant and curative etc.) and solid ingredients (oxidizer, metal fuel, burn rate modifier, combustion stabilizer etc.). Its processing involves several stages like ingredient preparation (grinding, 1.1 Hazard Division - 1.1 HD), mixing (1.1
J. Aerosp. Technol. Manag.. Publicado em: 2015-09