Melt
Mostrando 13-24 de 360 artigos, teses e dissertações.
-
13. Evaluation of the contributions of possible sources to the leucosome of the diatexite of Socorro-Guaxupé Nappe, in the Alfenas Region, MG, Brazil
Abstract The Socorro-Guaxupé Nappe crops out in southern Minas Gerais and it has an intermediate unit called Metaxite Unit, dominated by diatexites at its base, with large volumes of leucosome and schollen of stromatic garnet-biotite metatexite. Leucosome within the schollen crystallized via fractional crystallization and is dominated by plagioclase and qua
Braz. J. Geol.. Publicado em: 08/04/2019
-
14. Preparation and characterization of cefuroxime axetil solid dispersions using poloxamer 188
The main objective of the present work was to enhance the solubility and dissolution rate of poorly water-soluble drug cefuroxime axetil (CA) by formulating it into solid dispersions (SDs) with water soluble carrier poloxamer 188. Different methods were employed to prepare the dispersion, such as: Solvent method (SM), Kneading method (KM), Melt evaporation m
Braz. J. Pharm. Sci.. Publicado em: 08/04/2019
-
15. Non-isothermal melt crystallization kinetics of poly(3-hydroxybutyrate), poly(butylene adipate-co-terephthalate) and its mixture
Abstract Nonisothermal crystallization and melting of the biodegradable thermoplastics poly(3-hydroxybutyrate) (PHB), poly(butylene adipate-co-terephthalate) (PBAT), and a 1:1 PHB/PBAT blend were investigated by differential scanning calorimetry (DSC) over an extensive range of heating/cooling rates (2 to 64°C/min). The different phase transition behavior
Polímeros. Publicado em: 18/03/2019
-
16. Tayloring PS/PCL blends: characteristics of processing and properties
Abstract Blends of Polystyrene (PS) and Poly(ε-caprolactone) (PCL) were twin screw extruded, two PSs, with low and high melt flow rate (MFR) were used and their feasibility within PCL investigated by means of torque rheometry, mechanical tests, heat deflection temperature (HDT) and scanning electron microscopy (SEM); predictive models were utilized to evalu
REM, Int. Eng. J.. Publicado em: 2019-03
-
17. Development of Poly (butylene adipate-co-terephthalate) Filled with Montmorillonite-Polypyrrole for Pressure Sensor Applications
A novel pressure sensing material composed of poly (butylene adipate-co-terephthalate) (PBAT) and montmorillonite-polypyrrole (Mt-PPy) was prepared using melt mixing and injection molding. The structure and properties of the PBAT/Mt-PPy composites were evaluated and compared with those of the PBAT/PPy blends. The PBAT/Mt-PPy displays a very sharp insulator-c
Mat. Res.. Publicado em: 17/01/2019
-
18. PCL/ZnO Bio-friendly Films as Food Packaging Material.Thermal and morphological analysis
ABSTRACT Films of Poly(?-caprolactone) (PCL) and PCL/Zinc Oxide (ZnO) were obtained by solution processing. Thermal behaviour and morphological structure were analysed by means of Thermogravimetry (TGA), Differential Scanning Calorimetry (DSC), Optical Microscopy (OM) and Scanning Electron Microscopy (SEM). The addition of ZnO to PCL decreased the degradatio
Matéria (Rio J.). Publicado em: 06/12/2018
-
19. Gamma Ray and FTIR Studies in Zinc Doped Lead Borate Glasses for Radiation Shielding Application
Gamma ray shielding properties of borate glass samples containing oxides of lead and zinc are prepared by melt and quench technique and evaluated theoretically using XCOM computer software for gamma ray shielding properties. However, gamma ray shielding properties are discussed in terms of various calculated parameters such as half value layer, mean free pat
Mat. Res.. Publicado em: 14/11/2018
-
20. Efecto de la adición de bentonita sobre las propiedades ópticas de diferentes materiales compuestos poliméricos
ABSTRACT In this work, composite materials were obtained by the incorporation of bentonite to biodegradable and synthetic polymeric matrices. Commercial (BE) and natural (BM) bentonite samples were employed, as well as three different polymeric matrices: thermoplastic corn starch (TPS), high density polyethylene (HDPE) and a poly(styrene-b-butadiene-b-styren
Matéria (Rio J.). Publicado em: 19/07/2018
-
21. Caracterización de soldaduras cuproaluminotérmica en cañerías de conducción para la protección catódica
ABSTRACT Copper-Aluminothermic weld is a process in which welder is generated by thermofusion. The necessary heat is obtained by the aluminum reducing effect above copper oxide, creating a high temperature exothermic reaction, in which melt and overheated copper is the filler material [1].This technique is used to joint rails in railway industry, in groundin
Matéria (Rio J.). Publicado em: 19/07/2018
-
22. Geochemistry of basaltic flows from a basalt ring structure of the Serra Geral formation at Água Vermelha dam, Triângulo Mineiro, Brazil: implications for the magmatic evolution of the Paraná-Etendeka Province
ABSTRACT: The Serra Geral Formation belongs to the Paraná-Etendeka Magmatic Province (PEMP) and its geochemical and petrographic characteristics are not homogeneous. Many studies segment this group into six basaltic and two rhyolitic magma-types. It is believed that its extrusion occurred through crustal fissures in the Cretaceous, but some authors describe
Braz. J. Geol.. Publicado em: 2018-06
-
23. Effect of heat cycling on melting and crystallization of PHB/TiO2 compounds
Abstract Compounds of poly(3-hydroxybutyrate) (PHB) and titanium dioxide (TiO2) with filler content between 1% and 10% were prepared in a laboratory internal mixer. The effect of heating and cooling rates on the crystallization and melting of PHB/TiO2 compounds was investigated by differential scanning calorimetry (DSC). Melt and cold crystallization rates
Polímeros. Publicado em: 21/05/2018
-
24. The effect of molecular weight and hydrolysis degree of poly(vinyl alcohol)(PVA) on the thermal and mechanical properties of poly(lactic acid)/PVA blends
Abstract The effect of molecular weights and hydrolysis degrees (HD) of polyvinyl alcohol (PVA) on thermal and mechanical properties and crystallinity of polylactic acid (PLA)/PVA blends was investigated. Blends were prepared by the melt blending method using PLA/PVA ratios: 80/20, 90/10 and 97/3 wt. %. A single glass transition temperatures was observed fo
Polímeros. Publicado em: 21/05/2018