Mechanical Work
Mostrando 13-24 de 1676 artigos, teses e dissertações.
-
13. Hymenaea parvifolia Huber: dormancy breaking, morphology of fruit, seed and seedling
ABSTRACT The successful use of native species in conservation actions depends on basic knowledge of their biology, beginning with the identification of regenerating individuals in the field, up to the behavior and development of the species from the early stages of germination. Moreover, seed propagation and germination may be limited by the occurrence of do
Rev. Ceres. Publicado em: 2021-04
-
14. Characterization of sugarcane bagasse ash (SBA) and its evaluation for use in alkali-activated slag mixtures
Abstract This work proposed to incorporate the sugarcane bagasse ash (SBA) with a high content of organic matter (loss on ignition of 35.87%) in alkali-activated mixtures with blast furnace slag. After grinding SBA, replacement ratios of 10%, 20%, and 30% of the ground ash were used for the flowability evaluation. The mixtures containing 20% and 30% showed a
Cerâmica. Publicado em: 2021-03
-
15. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats
Poly(3-hydroxybutyrate) (PHB) has been proposed to be a potential candidate to be used as biomaterial. However, its poor processability, high brittleness and rigidity have limited its applicability. Transesterification reactions with poly(ε-caprolactone) (PCL), one of the most promising biomedical materials, emerge as an attractive alternative to improve it
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
16. MÉTODO MANUAL PARA DEPOSIÇÃO DE TINTAS FOTOLUMINESCENTES BASEADAS EM LOFS MISTAS APLICADO A CODIFICAÇÃO DE DOCUMENTOS
In this work, the process of synthesis of Metal-Organic Frameworks containing lanthanide ions (LOFs), accelerated via a precipitating agent, capable of accelerating the process of nucleation of MOF crystals, in order to explore the optical properties of this precursor solution (SP_Gd/EU-MOF), as a quick-response photoluminescent material in the coding of off
Quím. Nova. Publicado em: 2020-12
-
17. THEORETICAL UNDERSTANDING OF MORPHOLOGICAL DISTRIBUTION OF HYDROGEN IN AMORPHOUS CALCIUM SILICATE HYDRATE
Determining the morphological distribution of hydrogen atoms in calcium silicate hydrate phase (C-S-H) is of great concern but challenging. In this work, based on the stoichiometric composition of (CaO)1.7(SiO2)(H2O)1.8, a series of amorphous Ca1.7•Si•(O)3.7-x•(OH)2x•(H2O)1.8-x models are constructed using Monte Carlo method, where x represents the m
Quím. Nova. Publicado em: 20/07/2020
-
18. The Covid-19 pandemic seen from the frontline
ABSTRACT COVID-19 disease caused by infection with the SARS-CoV-2 virus produces respiratory symptoms, predominantly of the upper airways, which can progress to pneumonia after 7 days with persistent fever, cough and dyspnea, and even develop a syndrome of acute respiratory distress (ARDS), multi-organ failure and death. Since COVID-19 disease was declared b
Int. braz j urol.. Publicado em: 2020-07
-
19. CELLULOSE NANOFIBERS FROM CASSAVA AGRO-INDUSTRIAL WASTE AS REINFORCEMENT IN PVA FILMS
Cellulose nanofibers (CNF) have been applied in composite systems due to the abundance of raw material, excellent mechanical and thermal properties. In this work, CNF was prepared from agroindustrial waste and used in specified amounts in polyvinyl alcohol (PVA) composites. The FTIR spectra of CNF, chemically purified cellulose (CPC) and Cassava Agro-industr
Quím. Nova. Publicado em: 2020-06
-
20. The use of pre-emergence herbicides in cassava decreases the need of manual weeding
ABSTRACT Weed management consists of a fundamental practice in cassava, with mechanical and chemical control widely used. The objective of this work was to evaluate the efficacy of pre-emergence herbicides, as well as to determine the interaction of these with weeding complementation in the weed management in cassava. Two experiments were conducted in Junque
Rev. Ceres. Publicado em: 2020-06
-
21. Upconversion 3D Printed Composite with Multifunctional Applications for Tissue Engineering and Photodynamic Therapy
Upconversion nanoparticles (UCNPs) are suitable materials for bioapplications due to their ability to emit visible light under near infrared (NIR) excitation, in the biological transparency range. Polycaprolactone(PCL)-based scaffolds are widely used in tissue engineering in combination with inorganic compounds to improve bioactivity and osteoconductive prop
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
22. Effects of Geometrical Feature on Microstructures and Mechanical Properties of Refill Friction Stir Spot Welding 6061 Aluminum Alloy
Refill friction stir spot welding (refill FSSW) is a solid state joining technology developed and patented by Helmholtz-Zentrum Geesthacht. Refill FSSW is a welding process suitable for spot joining lightweight materials in similar and dissimilar joint configuration. The result is a spot welded in lap configuration with minimal material loss and a flat surfa
Mat. Res.. Publicado em: 17/01/2020
-
23. Influence of treatment with water-soluble CCB preservative on the physical-mechanical properties of brazilian tropical timber
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such proces
Mat. Res.. Publicado em: 13/01/2020
-
24. Os modelos no Ensino de Ciências: Reações de estudantes ao utilizar um objeto-modelo mecânico concreto analógico didático (OMMCAD)
Resumo Neste manuscrito apresentamos a noção de objeto-modelo mecânico concreto analógico didático (OMMCAD), um tipo de modelo didático nascido na fusão da epistemologia Bungeana dos modelos (modelos científicos) com a didática das ciências (modelos didáticos), desenvolvido para fins de ensino-aprendizagem da temática astronômica do a) movimento
Rev. Bras. Ensino Fís.. Publicado em: 10/01/2020