Mechanical Compression Testing
Mostrando 1-12 de 30 artigos, teses e dissertações.
-
1. Análise da resistência de placas ósseas de acrílico fabricadas a laser quando submetidas a diferentes forças que agem sobre o foco de fratura
RESUMO Objetivou-se com este trabalho analisar a resistência de placas ósseas de acrílico, confeccionadas com cortadora a laser CO2, quando submetidas às forças que agem sobre o foco de fratura. Foram utilizados 40 fêmures de ovinos (Ovis aries) e confeccionadas 40 placas de acrílico, os quais foram avaliados em grupos: grupo OP - foram avaliados 20 o
Arq. Bras. Med. Vet. Zootec.. Publicado em: 13/12/2019
-
2. Thermo-Mechanical Properties of P(HB-HV) Nanocomposites Reinforced by Nanodiamonds
Several studies of biodegradable polymers and copolymers have been carried for different applications in the biomedical area. This current study aims to develop a biocomposite to be used as an orthopedic device, using poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(HB-HV), a biodegradable copolymer, with 94%HB and 6%HV, as matrix; and nanodiamonds (ND) with p
Mat. Res.. Publicado em: 26/06/2017
-
3. Biomechanical Analysis of Locking Reconstruction Plate Using Mono- or Bicortical Screws
This experimental in vitro study evaluated the influence of screw length on the mechanical properties of a locking reconstruction plate designed with locking rings inserted into plate holes. Synthetic bone cylinders with 10 mm fracture gap and seven-hole locking reconstruction plates were used. Two groups of bone-plate constructs were assembled: Group 1 –
Mat. Res.. Publicado em: 08/04/2016
-
4. Direct-write assembly of 3D scaffolds using colloidal calcium phosphates inks
Additive manufacture techniques using concentrated colloidal inks are a promising approach for creating three-dimensional (3D) calcium phosphates scaffolds for bone repair and regeneration. Among those, the direct-write assembly allows building scaffolds with precise size and geometry. In the present work, commercial β-TCP and HA were used to produce two t
Matéria (Rio J.). Publicado em: 2014-03
-
5. Biomechanical analysis on different fixation techniques for treatment of mandibular body fractures
AIM: To biomechanically analyze two fixation techniques in polyurethane hemi-mandibular body fractures, using a universal testing machine. METHODS: The study employed 10 polyurethane hemi-mandible replicas, which simulated simple fractures of the mandibular body, divided into two groups: one group comprised 5 hemi-mandibles with two 2.0 mm system plates in t
Braz. J. Oral Sci.. Publicado em: 2013-06
-
6. Fracture resistance of endodontically treated teeth restored with different intraradicular posts with different lengths
AIM: This study compared the resistance to fracture of endodontically treated teeth restored with different intraradicular posts with different lengths and full coverage metallic crowns. METHODS: Sixty extracted human canine teeth were randomly divided into 6 groups. Groups CP5, CP75 and CP10 were restored using custom cast post and core (CP) and groups PF5,
Braz. J. Oral Sci.. Publicado em: 2013-03
-
7. Estudo do comportamento mecânico da liga alumínio cobre 2024 solubilizada e envelhecida para aplicações aeronáuticas
Aluminum alloys present low specific density, good strength, and high corrosion resistance under common environments. Aluminum-Copper 2024 alloy is one of the most widely used alloy in aircraft fuselage structures due to its good mechanical properties. The microstructure of the alloy was observed by optical microscopy showing elongated grains caused from the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/08/2011
-
8. Caracterização de concreto reforçado com fibras pela técnica de microtomografia computadorizada por transmissão de raios X / Characterization of fiber reinforced concrete by the technique of computed microtomography X ray transmission
Nesta dissertação de Mestrado do programa de Pós-Graduação em Ciência e Tecnologia dos Materiais é apresentado um estudo para a caracterização do concreto reforçado com fibras de polipropileno e de aço pela análise das imagens de microtomografia computadorizada por transmissão de raios X (μCT). Foram produzidos corpos de prova de concreto p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/08/2011
-
9. Validation of an experimental polyurethane model for biomechanical studies on implant-supported prosthesis: compression tests
OBJECTIVES: The complexity and heterogeneity of human bone, as well as ethical issues, most always hinder the performance of clinical trials. Thus, in vitro studies become an important source of information for the understanding of biomechanical events on implant-supported prostheses, although study results cannot be considered reliable unless validation stu
Journal of Applied Oral Science. Publicado em: 2011-02
-
10. Influência de variáveis de compactação na estrutura dos solos: caracterizações geotécnica, química, mineralógica e microestrutural / Influence of laboratory compaction variables in soils structure: geotechnical, chemical, mineralogical and microstructural characterizations
This research addressed the effect of laboratory methods of static and dynamic compaction on compaction parameters, mechanical strength and compressibility of three gneiss residual soils (two young and one mature soils) and two granite residual soils (one young and one mature soils) from the Minas Gerais State, Brazil. Disturbed soils samples were collected,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/12/2010
-
11. Study for use the wastes of the paper manufacture in the road construction / Estudo para a utilização de resíduo da fabricação de papel na construção rodoviária
The paper and pulp industry represent one of the most expressive industrial sector around the world, being of great importance to the world economy. In South America, because of the wide forest resources, Brazil and Chile are the largest pulp-producing. Brazil produces around 6 million tons of pulp per year, among which 98% of the pulp are produced by the bl
Publicado em: 2010
-
12. Estudo da aderência entre concreto e armadura: análise da influência das fibras de aço / Study of adhesion between concrete and reinforcement: influence of steel fibers
Bond between steel bars and concrete allows the use of reinforced concrete as a construction material. If the bond is appropriate, the cracks will be as little as possible, so the reinforcing bar will be protected by the surrounded concrete. Therefore, the aim of this research was to analyse the influence of steel fiber on mechanical properties of concrete a
Publicado em: 2010