Maximum Loading Point
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Mechanical Study of the Properties of Sutures used in Orthopedics Surgeries
Resumo Objetivo Avaliar as propriedades mecânicas dos fios de sutura normalmente usados nas cirurgias ortopédicas e caracterizar seu comportamento por meio de ensaios de tração para verificar qual deles apresenta maior resistência mecânica. Método Os ensaios de tração dos diferentes tipos de fios de sutura foram feitos na máquina de ensaios mec
Rev. bras. ortop.. Publicado em: 29/07/2019
-
2. Experimental study of brass properties through perforation tests using a thermal chamber for elevated temperatures
Abstract Experimental analysis on standard brass alloy has been carried out using a high pressure gas gun. Perforation tests have been performed for a variety of impact velocities from 40 to 120 m/s in order to study the material behaviour and to define failure modes. The main aim of the study has been to provide results using an innovative thermal chamber t
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
3. Rolling Contact Fatigue Life of Rail for Different Slip Conditions
Abstract A three-dimensional elastic-plastic finite element analysis (FEA) is carried out to estimate the rolling contact fatigue (RCF) crack initiation life for varied slip range on the rail arising from operational variations. The wheel load produces Hertzian contact pressure. Variation in engine traction induces slip variations that evolves thermal load i
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
4. Finite Element Investigation of Performance of Composite-Steel Double Lap Adhesive Joint Under Tensile Loading
Abstract Parametric study of composite-steel double lap joint under tensile loading is performed using finite element modeling. The joint is such that steel is placed between a straight and a curved composite sublaminate. Three joint characteristics including maximum Von Mises stress in adhesive layer, stiffness and weight are investigated. Design curves are
Lat. Am. j. solids struct.. Publicado em: 2017-02
-
5. Mechanical testing of thin-walled zirconia abutments
Although the use of zirconia abutments for implant-supported restorations has gained momentum with the increasing demand for esthetics, little informed design rationale has been developed to characterize their fatigue behavior under different clinical scenarios. However, to prevent the zirconia from fracturing, the use of a titanium connection in bi-componen
J. Appl. Oral Sci.. Publicado em: 2013-02
-
6. Fracture process characterization of fiber-reinforced dental composites evaluated by optical coherence tomography, SEM and optical microscopy
This study used optical coherence tomography (OCT) compared to scanning electron microscopy (SEM) and optical microscopy (OM) to evaluate qualitatively crack propagation and final fracture in restorative composite materials - Filtek Z250 and Filtek Z350 (3M ESPE) - with fiber reinforcement after cyclic loading. Samples were made using a split mold. Initially
Brazilian Dental Journal. Publicado em: 2010
-
7. Projeto de um sistema fotovoltaico autônomo de suprimento de energia usando técnica MPPT e controle digital
This work presents the design and development of a battery charger aiming at applications in autonomous photovoltaic systems of low energy consumption, using a Buck type converter with digital control for the loading process based on a digital signal processor TMS320F2812 from Texas Instruments. In order help dimensioning the converter components the photovo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/08/2009
-
8. Minimum-time anti-swing control of gantry cranes using linear programming. / Controle anti-oscilatório de tempo mínimo para guindaste usando a programação linear.
The problem of minimum-time anti-swing transfer of a load in a ship-to-pier gantry crane is investigated in this work. The load is assumed to be initially at rest at the vertical position at the loading point above the ship and equally at rest at the unloading point above the hopper. The trolley is also assumed to be at rest at both points. A complete model
Publicado em: 2009
-
9. Comportamento à fratura de defeitos circunferenciais em dutos submarinos instalados por bobinamento
This study aims to evaluate the limit of the fracture instability for submarine pipelines installed by the Reeling Method, determining the maximum allowable ductile tearing for use in analysis of structural integrity through correlations with SENT specimens (Single Edge Notched Tension). The Standard DNV-RP-F108, which gives guidance to testing and analysis
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2009
-
10. AVALIAÇÃO E REFORÇO DAS CONDIÇÕES DE ESTABILIDADE DE TENSÃO EM BARRAS DE TENSÃO CONTROLADA POR GERADORES E COMPENSADORES SÍNCRONOS / VOLTAGE STABILITY ASSESSMENT AND ENHANCEMENT IN VOLTAGE-CONTROLLED BUSES BY SYNCHRONOUS GENERATORS AND COMPENSATORS
After the incidence of some voltage collapses in the energy transmission systems in the world, the voltage security became an issue of great interest in the last years due to the importance of its impact. The phenomenon of voltage stability is due to the excessive active and reactive power flow in the electrical transmission network and has been associated w
Publicado em: 2009
-
11. Carreador lipÃdico nanoestruturado à base de cera de carnaÃba: desenvolvimento, caracterizaÃÃo e uso na encapsulaÃÃo de benzofenona-3
Solid lipid nanoparticles made of pure lipids (SLN) or a mixture of solid and liquid lipids (NLC) have been proposed as a category of carriers for cosmetic ingredients of current and growing interest due to a number of advantages compared to conventional formulations. Natural waxes are considered lipid matrices of great potential for the production of topica
Publicado em: 2009
-
12. Maximização da margem de estabilidade sujeito a minimização do custo de produção da energia eletrica utilizando formulação em dois niveis / Maximization of the stability margin subjected to electric power generation cos minimization using a bilevel programming approach
O presente trabalho apresenta um modelo para o planejamento da operação de sistemas de potência visando maximizar a margem de estabilidade de tensão ao mesmo tempo em que minimizam-se os custos da produção da energia (despacho econômico). O objetivo é obter uma solução para o planejamento da operação da rede que leve em conta não só aspectos t�
Publicado em: 2008