Material Characterization
Mostrando 13-24 de 1526 artigos, teses e dissertações.
-
13. Rheology of mine tailings deposits for dam break analyses
Abstract This article deals with the rheology of tailings deposits related to dam break analysis. The material used was a fine tailings from iron ore processing. Geotechnical and rheological characterization of these tailings were performed. The rheological characterization consisted of rotational and oscillatory tests. It was observed that the rheological p
REM, Int. Eng. J.. Publicado em: 2021-06
-
14. Effect of Preparation Additives on the Antimicrobial Activity and Cytotoxicity of Polypyrrole
The search for new biomaterials has increased continuously in recent years and, in this context, the application of polypyrrole (PPy) as a promising material for this function has been reported as a result of positive responses, such as bioactivity and biocompatibility. In this study, PPy was obtained through modifications/adaptations made in methodologies o
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
15. PHYSICAL AND MECHANICAL PROPERTIES OF THE BAMBUSA VULGARIS AS CONSTRUCTION MATERIAL
ABSTRACT The fabrication of traditional construction materials consumes a large amount of energy, emits pollutants, and utilizes nonrenewable raw materials. Therefore, it is important to reduce the environmental impact of construction through the use of eco-friendly materials, such as bamboo. This work presents the characterization of Bambusa vulgaris, which
Eng. Agríc.. Publicado em: 2021-04
-
16. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
17. Utilization of ferronickel slag in hot mix asphalt
Abstract The growing concern in minimizing the disorderly disposal of waste in nature has been influencing measures that seek to give new environmentally sustainable and economically viable purposes for these materials. The use of steel slag aggregate in road paving emerges as an alternative for reducing the storage of this material in industrial yards, as w
REM, Int. Eng. J.. Publicado em: 2021-01
-
18. CARACTERIZAÇÃO FÍSICA E QUÍMICA DA BIOMASSA USADA COMO COMBUSTÍVEL SÓLIDO EM UMA CALDEIRA
Biomass is a renewable energy source most used in the world, however, depending on the chemical properties and origin of the material used as biofuel, the amount of ash generated during combustion can be high, harming the energetic harnessing. The objective of this study was to characterize chemically and physically biomass: bark, sawdust, and urban pruning;
Quím. Nova. Publicado em: 2021-01
-
19. Characterization of Sobradinho landslide in fluvial valley using MASW and ERT methods
Abstract Landslides can substantially impact the fluvial systems, which is why the continuous mapping of their extent, evolution and stability assessment is crucial. However, in such environments, material identification (e.g. colluvium) and subsurface characterization by the methods used for geologic mapping and geotechnical investigation is often a challen
REM, Int. Eng. J.. Publicado em: 2020-12
-
20. Characterization of traditional Algerian cheese “Bouhezza” prepared with raw cow, goat and sheep milks
Abstract “Bouhezza” is an Algerian traditional fermented soft-ripened cheese, found and consumed in the Northeast of Algeria. The objective of this study was to explore the preparation process (traditional making diagram) of “Bouhezza” cheese and to study the effect of the type of raw milk (cow, goat and sheep) on the yield and organoleptic character
Food Sci. Technol. Publicado em: 2020-12
-
21. Heat treatment analysis of ASTM A106 steel spheroidization and erosive wear at high temperatures
Abstract The microstructures of steels are altered when exposed to high working temperatures for long periods, which results in varied physical and chemical proprieties. This study evaluates the erosive wear behavior of ASTM A106 steel after it is exposed to high temperatures for long durations. Samples of normalized ASTM A106GrB steel were placed in a muffl
REM, Int. Eng. J.. Publicado em: 2020-12
-
22. Zeolite-SPION Nanocomposite for Ammonium and Heavy Metals Removal from Wastewater
Minimizing the emission of industrial effluents and realizing the recovery/extraction of key elements such as the rare earths from low concentration solutions, or during water decontamination processes, are some of the biggest challenges of modern society. Accordingly, the preparation and characterization of a low cost recyclable and reusable superparamagnet
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
23. Synthesis and Characterization of Hybrid Polymer Based on Functionalized Silica as Efficient Adsorbent for Heavy Metal Ions from Aqueous Solution
An organic-inorganic hybrid material based on a silica matrix and functionalized with imidazole group was successfully synthesized by the sol-gel process. The characterization techniques enabled the confirmation of the proposed structure as well as the effectiveness of the imidazole ring functionality in the structure of the material. It is insoluble in wate
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
24. Sobre reformas y políticas sanitarias en la España de los últimos años del franquismo y la transición democrática
An organic-inorganic hybrid material based on a silica matrix and functionalized with imidazole group was successfully synthesized by the sol-gel process. The characterization techniques enabled the confirmation of the proposed structure as well as the effectiveness of the imidazole ring functionality in the structure of the material. It is insoluble in wate
Hist. cienc. saude-Manguinhos. Publicado em: 2020-10