Manufacturing Systems
Mostrando 1-12 de 192 artigos, teses e dissertações.
-
1. Optimum design of steel columns filled with concrete via genetic algorithm: environmental impact and cost analysis
Abstract The use of concrete-filled tubular columns as part of structural systems has steadily increased throughout the years. The growing demand for structural elements of this nature is a direct result of the possibility to use various cross-section shapes that have increased strength, along with resistance to fire and other corrosive agents. The main obje
REM - International Engineering Journal. Publicado em: 2022
-
2. Three-dimensional assessment of internal adaptation measurement of three cad/cam ceramic systems
Resumo Este estudo teve como objetivo avaliar a adaptação interna de três diferentes coroas cerâmicas CAD/CAM (Computer-aided design/computer-aided manufacturing). A adaptação interna de um material cerâmico de rede com infiltração de polímero (Vita Enamic [VE]) foi comparada com duas cerâmicas de vidro maquináveis; silicato de lítio reforçado
Brazilian Dental Journal. Publicado em: 2022
-
3. Materials Selection Using a 2-tuple Linguistic Multi-criteria Method
The materials selection can affect the design component radically, with effect on the manufacturing systems efficiency, environmental impact issues, and customer satisfaction. There are different methods employed for materials selection; however, two steps are usual for most of these methods: screening and ranking. The ranking step identifies among materials
Mat. Res.. Publicado em: 20/01/2020
-
4. Analysis and proposal of reduction of lead time in the process of cutting, loading and transportation in a sugar cane factory: a study case
Resumo A partir da importância do setor sucroenergético para a economia brasileira, e da importância do processo de corte/carregamento/transporte (CCT) de cana no suprimento e no custo da produção do açúcar, álcool e derivados, este artigo tem como estudo de caso uma usina de cana-de-açúcar paulista. O objetivo deste trabalho foi construir propost
Gest. Prod.. Publicado em: 05/09/2019
-
5. Modular modeling approach for FDM printed structures and piezo disks for metamaterial design
Abstract Research in metamaterials has recently gained interest in the field of noise and vibration control. The ability of creating band gap zones with minimum added mass is the main feature behind its success. In addition, the use of 3D printed parts, particularly the Fused Deposition Modeling (FDM), offers a practical solution for manufacturing parts with
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
6. A New Conductive Ink for Microstrip Antenna and Bioinspired FSS Designs on Glass and Fiberglass Substrates
Abstract This paper describes an investigation of the possibility of using a new conductive ink, insted of copper clad laminates, in the manufacturing of microstrip patch antennas on glass and fiberglass substrates and of bioinspired frequency selective surfaces (FSSs) on fiberglass substrates for wireless communication systems. The new conductive ink is dev
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
7. Strategic Management of Manufacturing - Proposal of a method that recommends Production Techniques to Leverage Different Competitive Dimensions
RESUMO A literatura sobre estratégia de manufatura é bastante extensa. A abordagem de alguns conceitos, tais como Unidade Estratégica de Negócios (UEN) e Dimensões Competitivas, está relacionada com o conceito de Fábrica Focada de Skinner (1974) e culmina na definição de diferentes técnicas, sistemas e ferramentas que eleva cada Dimensão Competiti
BBR, Braz. Bus. Rev.. Publicado em: 2019-06
-
8. Avaliação da eficácia de sistema de ventilação local exaustora utilizado no controle de sílica cristalina em indústria de borracha de silicone
Resumo Introdução: os sistemas de ventilação local exaustora (SVLE) podem ser utilizados para controlar a exposição ocupacional a agentes químicos. Contudo, muitas vezes são indevidamente concebidos, instalados ou operados, tornando-se ineficazes. Objetivo: avaliar a eficácia de um SVLE empregado para controle da sílica cristalina utilizada na pr
Rev. bras. saúde ocup.. Publicado em: 25/02/2019
-
9. Simulation-Based Analysis of Additive Manufacturing Systems for Fuel Nozzles
ABSTRACT: Additive manufacturing technologies have the potential to revolutionize manufacturing, allowing for the production of ever more complex products and supporting the creation of strategic competitive advantages to certain industries. Recent investments in additive manufacturing systems show that operational plants are close to become reality. In this
J. Aerosp. Technol. Manag.. Publicado em: 11/10/2018
-
10. Production line performance analysis within a MTS/MTO manufacturing framework: a queueing theory approach
Abstract Paper aims Mixing the Make-To-Stock (MTS) and Make-To-Order (MTO) strategies to benefit from the both manufacturing systems in an environment with impatient customers. Originality This is the first research article which uses the queuing theory to find the best place of the Order Penetration Point (OPP) in a production line with impatient custom
Prod.. Publicado em: 23/07/2018
-
11. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Manufacturing of Cu-Sn foams through SDP
ABSTRACT This work reports the processing of bronze foams manufactured by using the powder metallurgy method known as Sintering Dissolution Process. During the sintering step, a device with controlled atmosphere separated from the heating furnace was employed to avoid the quick oxidation of metal particles. The device allows to control its internal atmospher
Matéria (Rio J.). Publicado em: 19/07/2018