Manufacturing Process Modeling
Mostrando 1-12 de 32 artigos, teses e dissertações.
-
1. Implementation of a Flexible Manufacturing System in a production cell of the automotive industry: decision and choice
Abstract Paper aims The purpose is to decide on the technology for the implementation of an FMS in a manufacturing cell that produces the coil for starting engines in a company of the Brazilian automotive industry. Originality The mixed use of structured methods to support a semi-structured decision-making problem. Research method The qualitative-quantita
Prod.. Publicado em: 30/05/2019
-
2. Avaliação comparativa da pegada de carbono de margarina e manteiga produzidas no Sul do Brasil
RESUMO A avaliação de ciclo de vida (ACV) é uma técnica de estimativa de impactos ambientais, como emissão de gases de efeito estufa (CO2eq), para geração de produto ou realização de processo. O objetivo deste estudo foi estabelecer a pegada de carbono para a produção da margarina e da manteiga com uso das normas ISO e PAS aplicadas a uma empresa
Eng. Sanit. Ambient.. Publicado em: 25/04/2019
-
3. Consistency analysis of mechanical properties of elements produced by FDM additive manufacturing technology
ABSTRACT Additive manufacturing (AM) technology refers to the process of producing 3D objects by adding material in successive layers. Fused deposition modeling (FDM) is one of the AM technologies where objects are built by adding layers of melted thermoplastic filament onto the printing surface. Mechanical properties of FDM printed part depend on many influ
Matéria (Rio J.). Publicado em: 06/12/2018
-
4. Finite Element Modeling and Experimental Verification of Nitriding Process in S30C Steel
A mathematical model has been developed to simulate the nitriding process of plain carbon steel, considering the simultaneous diffusion of nitrogen in different iron-nitrogen (Fe-N) phases and the precipitation dynamics of γ' and ε iron-nitride. The model can predict the distribution of nitrogen concentration, volume fraction of Fe-N phases and hardness. F
Mat. Res.. Publicado em: 16/02/2017
-
5. Three-dimensional numerical modeling of RTM and LRTM processes
Resin Transfer Molding (RTM) is a manufacturing process in which a liquid resin is injected into a closed mold pre-loaded with a porous fibrous preform, producing complex composite parts with good surface finishing. Resin flow is a critical step in the process. In this work, the numerical study of the resin flow in RTM applications was performed employing a
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-06
-
6. Desenvolvimentos mecânicos e computacionais de suporte às medidas com sensores termoelásticos
The hydrostatic pressure inside the cell or simply cell turgor is an important component of texture in vegetables and is directly related to firmness. The decrease in cell turgor of plant organs is also an indicator of loss of tissue water. This effect can be perceived visually by wilting accompanied by a dry appearance with the loss of brightness and color
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/08/2011
-
7. Análise de desempenho de um fogão solar com parabola fabricada em material compósito
It is presented a solar cooker made with a parabolic reflector composed by a composite material. For this purpose, it was utilized a cast concrete with a parabolic profile obtained by means of modeling. It will be demonstrated the manufacturing process and settings, as well as tests results, in order to determine the contact temperature and cooking time of s
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/05/2011
-
8. Statistical modeling of manufacturing uncertainties for microstrip filters
This work presents a technique to characterize the errors that occur in the process of manufacturing into electromagnetic simulations of microwave devices. The procedure combines the unscented transform (UT) with simulations. The use of the UT allows efficient use of computational resources for the characterization of the random variables modeling the uncert
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2011-06
-
9. Estudos de simulação computacional do processo de redução de UF4 a Urânio metálico / computational simulation studies of the reduction process of UF4 to metallic uranium
The production of metallic uranium is essential for production of fuel elements for using in nuclear reactors manufacturing of radioisotopes and radiopharmaceuticals. In IPEN, metallic uranium is produced by magnesiothermical reduction of UF4. This reaction is performed in a closed graphite crucible inserted in a sealed metal reactor and no contact with the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/12/2010
-
10. Aplication of unscented transformed (ut) for design filters microwave / Aplicação da transformada de incerteza (ut) para projeto de filtros de microondas
The manufacture of complex filters and their tests depend on electromagnetic simulation for validation and correct analysis. However, in the filter assembly, the fabrication process introduces new sources of uncertainty that are difficult to model with the electromagnetic simulator. The result may be significant differences between the simulated responses an
Publicado em: 2010
-
11. Transformação de redes de Petri coloridas em processos de decisão markovianos com probabilidades imprecisas. / Conversion from colored Petri nets into Markov decision processes with imprecise probabilities.
The present work was motivated by the need to consider stochastic behavior when planning the production mix in a manufacturing system. These systems are exposed to stochastic behavior that is usually not considered during production planning. The main goal of this work was to obtain a method to model manufacturing systems and to represent their stochastic be
Publicado em: 2010
-
12. An estimation method for gate delay variability in nanometer CMOS technology
In the nanoscale regime of VLSI technology, circuit performance is increasingly affected by variational effects such as process variations, power supply noise, coupling noise and temperature changes. Manufacturing variations may lead to significant discrepancies between designed and fabricated integrated circuits. Due to the shrinking of design dimensions, t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2010