Manufacturing Engineering
Mostrando 1-12 de 79 artigos, teses e dissertações.
-
1. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
2. Aplicação da Metodologia para Qualificação de Procedimentos de Soldagem de Tubulações Industriais Conforme Parâmetros dos Códigos ASME B31.3 e ASME SECTION IX*
Resumo Este trabalho foi desenvolvido visando auxiliar os profissionais de soldagem quanto as incertezas relacionadas às atividades de fabricação, montagem e manutenção de tubulações em plantas industriais no qual se refere à maneira adequada para a condução de atividades de qualificação de procedimentos de soldagem. Discorre sobre a metodologia
Soldag. insp.. Publicado em: 21/10/2019
-
3. Avaliação da eficácia de sistema de ventilação local exaustora utilizado no controle de sílica cristalina em indústria de borracha de silicone
Resumo Introdução: os sistemas de ventilação local exaustora (SVLE) podem ser utilizados para controlar a exposição ocupacional a agentes químicos. Contudo, muitas vezes são indevidamente concebidos, instalados ou operados, tornando-se ineficazes. Objetivo: avaliar a eficácia de um SVLE empregado para controle da sílica cristalina utilizada na pr
Rev. bras. saúde ocup.. Publicado em: 25/02/2019
-
4. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
5. Caracterización de compositos biocerámicos en esponjas de titanio mediante interpenetración por corriente pulsada asistida
ABSTRACT Recently, it has been directing some special attention to the development of new manufacturing processes, with engineering applications in human tissues [1]. 3D printing applied to tissue engineering requires pulse computational techniques such as stereolithographic modeling, and special manufacturing processes, to name a few; Laser Sintering or Ext
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Análisis comparativo de las propiedades mecánicas de un material compuesto reforzado con fibras de carbono y las de su matriz polimérica de resina epóxica
ABSTRACT In recent years composite materials have been developed for different applications in engineering areas. This paper first presents the tensile properties of a polymer, in this case an epoxy resin, to be used as the matrix of a fiber reinforced composite material. A study of the mechanical properties is presented, which was carried out by performing
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Aircraft Preventive Maintenance Data Evaluation Applied in Integrated Product Development Process
ABSTRACT: Initial Maintenance Review Board Report (MRBR) uses in service operation experience as a reference to define maintenance tasks intervals. However, in general, there is no structured data to compare systems performance and provide useful information to the analysts' decision-making. Even when engineering judgment is based on certification process, s
J. Aerosp. Technol. Manag.. Publicado em: 29/03/2018
-
8. Analyzing the competences of production engineering graduates: an industry perspective
Abstract This paper aims at conducting an analysis the competences of production engineering graduates, building on an industry view. To this end, we conducted a survey addressing 103 medium and large companies within the Brazilian manufacturing industry. The results suggest that companies do recognize the importance of competences. Some gaps in the competen
Prod.. Publicado em: 01/11/2017
-
9. An initiative for integrating problem-based learning into a lean manufacturing course of an industrial engineering graduate program
Abstract The interest in improving the quality of engineering education is widely deemed. Due to an increasingly worldwide competition, Lean Manufacturing (LM) has been a relevant subject among industrial engineering graduate programs. Despite the advances in teaching LM principles and techniques, the practical character inherent to LM undermines learning an
Prod.. Publicado em: 27/07/2017
-
10. The Skateboard Factory: a teaching case on discrete-event simulation
Abstract Real-life applications during the teaching process are a desirable practice in simulation education. However, access to real cases imposes some difficulty in implement such practice, especially when the classes are large. This paper presents a teaching case for a computer simulation course in a production engineering undergraduate program. The motiv
Prod.. Publicado em: 22/06/2017
-
11. Continuum Structural Layout in Consideration of the Balance of the Safety and the Properties of Structures
Abstract In the article, a new approach considering structural local failure for topology optimization of continuum structure is proposed. It aims at not only lowering the risk of local failure in the concerned structural regions, but also ensuring a good stiffness of the structure. The local failure may be caused by the structural uncertainties or possible
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
12. Robust Multi-objective Optimization Applied to Engineering Systems Design
Abstract In engineering systems design, theoretical deterministic solutions can be hardly applied directly to real-world scenarios. Basically, this is due to manufacturing limitations and environmental conditions under which the real system will operate. Therefore, a small variation in the design variables vector can result in a meaningful change on the theo
Lat. Am. j. solids struct.. Publicado em: 2016-09