Magnetic Induction
Mostrando 1-12 de 97 artigos, teses e dissertações.
-
1. Multifunctionality of βCD/Ofloxacin and HPβCD/Ofloxacin Complexes: Improvement of the Antimicrobial Activity and Apoptosis Induction on Lung Adenocarcinoma A549 Cells
The ofloxacin (OFLOX) is a second-generation synthetic antibiotic that can be classified as a multifunctional drug, but is a poorly soluble drug, which influences its efficiency. The inclusion complexes of OFLOX with β-cyclodextrin (βCD) or hydroxypropyl-β-cyclodextrin (HPβCD) can improve the chemical characteristics of the drug; however, studies showing
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
2. APRESENTAÇÃO - História Antiga: Diferentes Perspectivas
Biodiesel is a suitable alternative to replace the petro-diesel. The biodiesel is formed by unsaturated esters easily degraded by interferences of oxygen, temperature, contact with metals or contaminants. The aim of this research was to investigate the biodiesel degradation process via 1H nuclear magnetic resonance (NMR) spectroscopy, observing the olefinic,
Rev. Bras. Hist.. Publicado em: 2020-08
-
3. Evaluation of the Oxidation Degradation Process of Biodiesel via 1H NMR Spectroscopy
Biodiesel is a suitable alternative to replace the petro-diesel. The biodiesel is formed by unsaturated esters easily degraded by interferences of oxygen, temperature, contact with metals or contaminants. The aim of this research was to investigate the biodiesel degradation process via 1H nuclear magnetic resonance (NMR) spectroscopy, observing the olefinic,
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
4. Synthesis of New Phenolic-Schiff Base and Its Application as Antioxidant in Soybean Biodiesel and Corrosion Inhibitor in AISI 1020 Carbon Steel
New Schiff base compound N, N’-bis-(4-hexadecanate)-salicylethylenediamine (named IM) was synthesized, and characterized via infrared and nuclear magnetic ressonance spectroscopies. IM was tested as corrosion inhibitor and antioxidant in soybean biodiesel. Corrosion studies were developed with AISI 1020 carbon steel in a three-step accelerated corrosion as
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
5. Comparison and Combination of Techniques for Determining the Parameters of a Magnetic Hysteresis Model
Abstract The Jiles-Atherton scalar hysteresis model presents five parameters used to represent the material tested and used to calculate the magnetic losses. This article presents a comparative analysis of the performance of two methods of identifying these parameters. In the first method, the equations of Jiles-Atherton were assembled into a single non-line
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
6. Improvement of Texture and Magnetic Properties in 4.5 wt.% Si Grain-Oriented Electrical Steels
4.5 wt.% Si grain-oriented electrical steel sheets were successfully produced by hot rolling, normalizing, warm rolling and annealing, and texture evolution was investigated using macro- and micro-texture analysis. It is found that the recrystallization texture of sheets is very sensitive to the warm rolling reduction, and 83-87% warm rolling reductions are
Mat. Res.. Publicado em: 19/08/2019
-
7. Therapeutic evaluation of magnetic hyperthermia using Fe3O4-aminosilane-coated iron oxide nanoparticles in glioblastoma animal model
RESUMO Objetivo: Avaliar o potencial da técnica de magneto-hipertermia utilizando nanopartículas superparamagnéticas de óxido de ferro recobertas com aminosilana em modelo de tumores de glioblastoma. Métodos: As nanopartículas superparamagnéticas de óxido de ferro recobertas com aminosilana foram avaliadas quanto à sua estabilidade em meio aquoso
Einstein (São Paulo). Publicado em: 01/08/2019
-
8. Evolution of magnetic response as a function of annealing temperature in Fe-based alloys
ABSTRACT The magnetic response, coercive force and magnetic induction, in Fe-10at.% Si, Fe-6at.% Al-9at.% Si and Fe-4at.% Al-8at.% Ge alloys as a function of the annealing temperature was determined and correlated to the microstructural state. The microstructural characterization was made through differential thermal analysis, mechanical spectroscopy and neu
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Síntesis y evaluación de las propiedades magnéticas de ferritas de galio y manganeso
ABSTRACT In this work, the synthesis of MgxGa1-xFe2O4 magnetic nanoparticles (MNPs) by sol-gel method is presented. All synthesized samples were identified as a crystalline single phase and the saturation magnetization (Ms) values are within the range of 21,2 to 46,4 emu/g, while coercive field values are less than 100 Oe. The selected samples (x= 0,4 and 0,
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Magneto-Elastic Analysis of an Annular FGM Plate Based on Classical Plate Theory Using GDQ Method
Abstract Using GDQ method, the radial and circumferential stresses in an annular FGM plate with a uniform thickness under a transverse axisymmetric load is investigated. It is assumed that a uniform radial magnetic field acts on the top surface of the plate. The modulus of elasticity E and the magnetic permeability coefficient μ of the plate along its thick
Lat. Am. j. solids struct.. Publicado em: 2016
-
11. Synthesis and photostabilizing performance of a polymeric HALS based on 1,2,2,6,6-pentamethylpiperidine and vinyl acetate
Polymeric hindered amine light stabilizers (polymeric HALS) have been extensively studied because they combine a high ability to protect the polymers against harmful effects of weathering with minimum physical loss. In this study a new polymeric N-methylated HALS was synthesized by the radical copolymerization of a cyclic tertiary amine with vinyl acetate (V
Polímeros. Publicado em: 04/12/2015
-
12. Comparison Between the Heating Rates of a Magnetic Induction Soldering Iron and Another One Composed of Resistance
AbstractIn this work an experimental and comparative analysis is realized in order to determine the difference in the heating rate and thus the power consumption, between a magnetic induction soldering iron and another one of low cost composed of electric resistance. By maintaining a constant power supply 40 W, three models of comercial tips designed for the
Soldag. insp.. Publicado em: 2015-06