Machine Tool
Mostrando 1-12 de 141 artigos, teses e dissertações.
-
1. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
2. Machine-learning approaches in psychotherapy: a promising tool for advancing the understanding of the psychotherapeutic process
Braz. J. Psychiatry. Publicado em: 09/12/2019
-
3. Analysis of the Dynamic Stability of Ball-End Milling of AISI D6 Hardened Steel
AISI D6 hardened steel is a difficult to cut material that it is employed in mould and die manufacturing where long ball-end mills are frequently required to machine deep cavities. This condition can lead to excessive vibration between tool and workpiece resulting in a poor surface finishing and reduced tool life. This work analyses the dynamic stability of
Mat. Res.. Publicado em: 02/12/2019
-
4. Perspectivas do uso de mineração de dados e aprendizado de máquina em saúde e segurança no trabalho
Resumo Introdução: a variedade, volume e velocidade de geração de dados (big data) possibilitam novas e mais complexas análises. Objetivo: discutir e apresentar técnicas de mineração de dados (data mining) e de aprendizado de máquina (machine learning) para auxiliar pesquisadores de Saúde e Segurança no Trabalho (SST) na escolha da técnica ad
Rev. bras. saúde ocup.. Publicado em: 04/11/2019
-
5. Hydraulic System Onboard Monitoring and Fault Diagnostic in Agricultural Machine
Abstract Agricultural Machinery as an off-road vehicle is the backbone of the World agricultural industry. Its main function is to operate as a prime mover and support the power requirements to function the various type of draft implements. In this regards, the hydraulic system is an important part and is controlled by the propagated oil which is cleaned by
Braz. arch. biol. technol.. Publicado em: 24/10/2019
-
6. Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities
Resumo O objetivo deste estudo foi avaliar a resistência de união, razão base/topo de microdureza, adaptação marginal e nanoinfiltração interfacial de resinas compostas bulk fill (BF) e tradicional (RT) de viscosidade regular.: Duas BF (Filtek Bulk Fill e Aura Bulk Fill) e duas RT (Filtek Z250XT e Aura) foram testados. Quarenta cavidades cônicas (4,8
Braz. Dent. J.. Publicado em: 07/10/2019
-
7. THERMAL BEHAVIOR OF FOREST BIOMASS WASTES PRODUCED DURING COMBUSTION IN A BOILER SYSTEM
RESUMO Durante a queima da biomassa em sistemas industriais haverá a formação de resíduos contendo cinzas e carbono residual, cujo teor será variável em função da eficiência e dos parâmetros de operação das câmaras de combustão. A caracterização destes resíduos é ferramenta essencial para visualizar a sua potencialidade de reuso energético
Rev. Árvore. Publicado em: 23/09/2019
-
8. Rapid and Automatic Classification of Tobacco Leaves Using a Hand-Held DLP-Based NIR Spectroscopy Device
A hand-held near infrared (NIR) spectroscopy device is much more convenient than a traditional desktop NIR instrument. Thus, it is more suitable for the practical application. An automatic and rapid tool for grading tobacco leaves on the spot using a hand-held digital light processing (DLP)-based NIR spectroscopy device is proposed in this paper. Firstly, th
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
9. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Geotechnology as a Planning Tool in the Determination of Forest Extraction Costs
ABSTRACT The objective of this work was to use the geotechnology study as a planning tool in determining the costs of forest extraction. The research was carried out in areas of the Forest Company that operates in the southern region of Bahia, Brazil. The work was developed in two stages, the first corresponding to the determination of production costs of th
Floresta Ambient.. Publicado em: 05/09/2019
-
11. Machine Translation and Poetry. The Case of English and Portuguese
Abstract This article sets out to analyse the translations into Portuguese of three poems written I English, “A Letter is a Joy of Earth” by Emily Dickinson, “To a Stranger” by Walt Whitman and “Sandra” by Charles Bukowski. Three translations by three human translators, Geir Campos, Pedro Gonzaga and Jorge de Sena, are compared to the translation
Ilha Desterro. Publicado em: 29/08/2019
-
12. Application of Support Vector Machine and Finite Element Method to predict the mechanical properties of concrete
Abstract Compressive strength and Young’s modulus are the main properties used in the design of concrete structures. They are responsible for the cost, safety and dimensioning of the structure, and are generally measured in expensive and time-demanding tests. This fact encourages researches for fast and cost-effective methods to investigate the concrete’
Lat. Am. j. solids struct.. Publicado em: 12/08/2019