M Wire
Mostrando 1-12 de 115 artigos, teses e dissertações.
-
1. Atypical chronic copper poisoning in a sheep secondary to copper wire ingestion - case report
RESUMO Um ovino Texel de 14 meses de idade, que fazia parte de um rebanho de 19 animais, apresentou hemoglobinúria, apatia, anorexia e morreu dois dias após o início dos sinais clínicos. Os ovinos permaneciam em campo nativo, onde eram realizados consertos de trailers, e múltiplos fios de cobre ficavam depositados na pastagem. O animal apresentou taquic
Arquivo Brasileiro de Medicina Veterinária e Zootecnia. Publicado em: 2022
-
2. Use of a Portable Microscope Combined with a Smartphone to Determine the Authenticity of Brazilian Banknotes and National Driver’s Licenses
This study proposed using a portable microscope combined with a smartphone and application (PhotoMetrix® application) to evaluate the authenticity of Brazilian banknotes (R$50 and R$100) and national driver’s licenses (NDL) through image acquisition (Samsung S7) and chemometric treatment (principal component analysis (PCA)). Six regions of the banknote we
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Editorial Comment: Continuous monitoring of intrapelvic pressure during flexible ureteroscopy using a sensor wire: a pilot study
ABSTRACT Purpose: Radical nephrectomy (RN) is the standard surgical type for pathological stage T3a (pT3a) renal cell carcinoma (RCC). Recently, some studies have suggested equivalence between partial nephrectomy (PN) and RN for oncologic control and have shown the benefits of PN for better renal function. We conducted this meta-analysis to assess oncologic
Int. braz j urol.. Publicado em: 2021-02
-
4. Efeito da Adição de Propileno aos Gases de Proteção Convencionais na Soldagem GMAW Aplicada a Juntas de Topo e Ângulo
Resumo O presente trabalho teve por objetivo avaliar a adição de 1,3% de C3H6 ao CO2 puro e 0,6% de C3H6 à mistura de Ar+25%CO2, na soldagem de aço carbono utilizando o processo Gas Metal Arc Welding (GMAW) aplicado em juntas de topo com chanfro em V e ângulo em T. As soldas foram realizadas utilizando chapas de aço SAE 1020, arame de solda ER70S-6 de
Soldag. insp.. Publicado em: 02/12/2019
-
5. Torsional fatigue strength of reciprocating and rotary pathfinding instruments manufactured from different NiTi alloys
Abstract To evaluate the torsional properties of engine-driven pathfinding instruments manufactured from different NiTi alloys – R-Pilot (tip size 12.5;.04 taper; M-Wire) and One G (tip size 14;.03 taper; Conventional NiTi). A total of 40 NiTi instruments from engine-driven pathfinding instruments (n = 20) were used. The torsion tests followed ISO 3630-1 (
Braz. oral res.. Publicado em: 28/10/2019
-
6. Influence of Electrooxidation of Ni Wire Electrodes on the Kinetics of Oxygen Evolution Reaction Studied in 0.1 mol dm-3 NaOH
This work reports on oxygen evolution reaction (OER), studied at nickel wire electrode material. Electrocatalytic behavior of non-oxidized and electrooxidized Ni wire samples was evaluated in 0.1 mol dm-3 NaOH solution for the potential range: 1600-2000 mV vs. RHE. The performance of nickel electrodes was examined by alternating current (a.c.) impedance spec
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
7. Wind Tunnel Investigation of the Wind Patterns in the Launching Pad Area of the Brazilian Alcântara Launch Center
ABSTRACT This paper presents a wind tunnel study of the flow patterns in the main Brazilian Space Port, the Alcântara Launch Center (ALC), located in the Northwest region, over an irregular coastal cliff of 40 m height. In the ALC region, constant winds of strong incidence are very common, which can change the characteristics of the atmospheric boundary lay
J. Aerosp. Technol. Manag.. Publicado em: 14/01/2019
-
8. Evaluation of tear production in juvenile opossum using three different methods
RESUMO: O estabelecimento do parâmetro de produção lacrimal nas diferentes espécies é importante para o entendimento da saúde do olho e é um dos componentes da semiotécnica oftálmica. Particularidades derivadas da anatomofisiologia das espécies não domésticas induzem a busca de metodologias que sejam mais fidedignas aos parâmetros. Objetivou-se
Pesq. Vet. Bras.. Publicado em: 2019-01
-
9. New concept of tunnel boring machine: high performance using water jet and diamond wire as rock cutting technology
Abstract Tunnel boring machines are important tools in underground infrastructure projects. Although being well established equipment, these machinesare based on designsof more than 60 years ago and are characterized by big dimensions, enormous weight and high power consumption. Commercial aspects should be noted too. The model adopted by the TBM industry re
REM, Int. Eng. J.. Publicado em: 2018-03
-
10. Debris extrusion and foraminal deformation produced by reciprocating instruments made of thermally treated NiTi wires
Abstract Objective To evaluate the amount of apically extruded debris, percentage of foraminal enlargement and apical foramen (AF) deformation that occurred during root canal preparation with different reciprocation systems: Reciproc, WaveOne (M-Wire), and ProDesign R (Shape Memory Technology Wire) at two different working lengths (WLs): 0.0 and 1.0 mm beyo
J. Appl. Oral Sci.. Publicado em: 18/01/2018
-
11. ITO Obtained by Spray Pyrolysis and Coating on Glass Substrate
Conductive thin films have various applications in different technological fields. Indium tin oxide (ITO) is a mixed oxide. In the film form, ITO has been widely employed as electrode in many optoelectronic devices. Methods like thermal evaporation, sputtering, chemical vapor deposition (CVD), electron beam, spray coating, and sol-gel synthesis give ITO thin
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
12. Metallurgical Characterization of API X65 Steel Joint Welded by MIG Welding Process with Axial Magnetic Field
In this work, API X-65 pipeline steel non-conventionally heat treated, to enhance its mechanical resistance, was welded using the Metal Inert Gas (MIG) process with and without the application of low intensity axial magnetic fields (6 mT). Microstructural and mechanical characterization of the welds revealed that the use of the magnetic field during welding
Mat. Res.. Publicado em: 23/03/2017