Lubricating Oil
Mostrando 1-12 de 39 artigos, teses e dissertações.
-
1. Avaliação tribológica de óleos hidráulicos biodegradável e mineral com deslizamento entre as ligas de Cu-Zn e WC-CoCr
RESUMO A correta seleção dos óleos lubrificantes e das superfícies de contato melhoram o desempenho e reduzem o consumo de energia das máquinas Por isso, a engenharia de superfícies propõe novos revestimentos aos quais seu comportamento tribológico combinado com o uso de óleos biodegradáveis em componentes de sistema hidráulicos, não são conheci
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. DETERMINAÇÃO DOS PARÂMETROS CINÉTICOS E SIMULAÇÃO COMPUTACIONAL DO PERFLUOROPOLIÉTER (PFPE) EMPREGADO COMO LUBRIFICANTE SINTÉTICO
This work aims to determine the kinetic parameters of the thermal decomposition of a lubricating grease based on perfluoropolyether (PFPE) and the computational simulation of this decomposition. The determination of kinetic parameters of thermal decomposition was done by thermal analysis using thermogravimetry (TG) at different heating rates (β) of 10, 15 a
Quím. Nova. Publicado em: 26/08/2019
-
3. Evaluation of the oil flow using the MQL technique applied in the cylindrical plunge grinding of AISI 4340 steel with cbn grinding wheel
Abstract The grinding process is defined as an abrasive cutting action of a tool known as grinding wheel, which is submitted to high rotations, promoting excellent finishing and accuracy in dimensions, respecting the parameters established in each project. During the machining, the cutting edges of the abrasive grains undergo wearing and this increases the c
REM, Int. Eng. J.. Publicado em: 2018-07
-
4. Influence of water in the MQL technique in the grinding of steel AISI 4340 using CBN wheels
Abstract Usually, machining employs cooling methods to avoid high temperatures. In most cases, the cutting fluid is applied with high flow and low pressures. This technique consumes a large amount of cutting fluid that causes serious problems in the environment and in the health of the worker. An alternative to the conventional cooling method is the Minimum
REM, Int. Eng. J.. Publicado em: 2018-07
-
5. Evaluation of Lubricating Properties of Diesel Based Fuels Micro Emulsified With Glycerin
The mineral diesel oil sold in Brazil, due to environmental reasons; presents sulfur concentration of 10 ppm, which causes a deficiency of lubricity, since sulfur is one of the chemical species that gives a good lubricating characteristic. Poor lubricity affects performance and causes failure of engine parts. This study aimed to evaluate the use of glycerin
Mat. Res.. Publicado em: 18/12/2017
-
6. Influence of lubricant oil residual fraction on recycled high density polyethylene properties and plastic packaging reverse logistics proposal
Abstract To recycle post-consumer HDPE contaminated with waste lubricating oils, companies include prior washing and drying in the process. This consumes large amounts of water and energy, generates significant effluent requiring treatment. This study assesses lubricating oil influence on HDPE properties to evaluate the feasibility of its direct mechanical r
Polímeros. Publicado em: 2015-10
-
7. Interference standard applied to sulfur determination in biodiesel microemulsions by ICP-QMS
A determinação de enxofre por espectrometria de massa com plasma acoplado indutivamente (ICP-MS) não é trivial, especialmente devido a intensas interferências espectrais causadas por íons poliatômicos como 16O2+, (16OH)2+, 14N16OH2+ e 14N18O+. Neste trabalho, espécies de argônio naturalmente presentes no plasma (padrões de interferência, IFS) são
Journal of the Brazilian Chemical Society. Publicado em: 2012-05
-
8. Eficácia da análise de amostras de óleo lubrificante por espectrometria de emissão óptica com plasma indutivamente acoplado na detecção de desgaste em motores Diesel após amaciamento / Effectiveness of oil lubricating sample analysis by optical emission spectrometry with inductively coupled plasma for wear detection in Diesel engines after running in
Este trabalho tem como objetivo principal avaliar se a determinação da concentração de metais em óleo lubrificante por ICP-OES (Espectrometria de Emissão Ótica com Plasma Indutivamente Acoplado, do inglês Inductively Coupled Plasma Optical Emission Spectroscopy), é capaz de auxiliar no diagnóstico de eventuais falhas por desgaste em motores Diesel
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/07/2011
-
9. Avaliação de diferentes estratégias de biorremediação de solo argiloso contaminado por óleo em biorreator de fase semi-sólida / Assessement of bioremediatioi strategies for treatment of oil contamiatedclay soil in slurry reactors
A prática da troca de óleo lubrificante usado, particularmente óleos automotivos, representa um grave problema ambiental em função de sua natureza perigosa, do manuseio incorreto e do descarte indiscriminado no meio ambiente. A investigação quanto à remediação de áreas contaminadas por esse resíduo torna-se necessária, particularmente para solo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/04/2011
-
10. Desenvolvimento de uma unidade virtual para desasfaltação de resíduos pesados de petróleo para maximização de óleo desasfaltado e daí óleo lubrificante / Virtual unity development of heavy petroleum residues deasphalting to maximize the deasphalted oil production, and consequently, the lubricant oil production
O aumento mundial na demanda de energia e o descobrimento de óleo pesado e viscoso por parte da PETROBRAS nos últimos anos têm incrementado o desenvolvimento de novas tecnologias no Brasil para o processamento deste tipo de petróleo, assim como a adequação dos processos já existentes nas refinarias, visando atingir os requerimentos do mercado ao se ob
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/03/2011
-
11. ELEMENTAL DETERMINATION IN LUBRIFICANT OIL AND FUEL OIL BY ICP OES AND DRC-ICP-MS / DETERMINAÇÃO ELEMENTAR EM ÓLEO LUBRIFICANTE, ÓLEO COMBUSTÍVEL E BIODIESEL POR ICP OES E DRC-ICP-MS
Neste trabalho, são propostas duas metodologias para análise elementar em óleo lubrificante, óleo combustível e biodiesel, através das técnicas de espectrometria de emissão óptica com plasma indutivamente acoplado e espectrometria de massa com plasma indutivamente acoplado com célula de reação dinâmica. Foram combinadas a facilidade e a rapidez
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/02/2011
-
12. Fractal dimensional surface analysis of AISI D2 Tool steel material with nanofluids in grinding process using atomic force microscopy
The surface analysis of nanomachined AISI D2 tool steel materials is measured using atomic force microscopy. The surface roughness and fractal dimensional analysis are the important factors in nano tribology and evaluating the quality of nanomachined surface. Carbon nanotube increases the heat carrying capacity, thermal conductivity of the lubricating oil an
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-12