Lqr Control
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. Vibration control device for steel tubular towers of Horizontal Axis Wind Turbines
Abstract This paper presents and discusses the design of a vibration control device for a 120 m high steel tubular tower of onshore Horizontal Axis Wind Turbine (HAWT). The tower is modeled using beam (own code), and shell and solid finite elements (via ANSYS). The Dynamic Vibration Absorber (DVA) is designed to be attached to the tower top, aiming to analyz
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
2. MULTIVARIABLE OPTIMAL CONTROL OF A HEAT EXCHANGER NETWORK WITH BYPASSES
Abstract Heat exchanger networks present an interesting control problem due to coupling among process streams. In this work, the linear quadratic regulator (LQR), a feedback optimal control technique, is used to control stream temperatures on a laboratory scale heat exchanger network, through bypass manipulation, in a multivariable system. The LQR design was
Braz. J. Chem. Eng.. Publicado em: 2016-03
-
3. Optimal Placement of Piezoelectric Macro Fiber Composite Patches on Composite Plates for Vibration Suppression
AbstractThis work presents a new methodology for the parametric optimization of piezoelectric actuators installed in laminated composite structures, with the objective of controlling structural vibrations. Problem formulation is the optimum location of a Macro Fiber Composite (MFC) actuator patch by means the maximization of the controllability index. The co
Lat. Am. j. solids struct.. Publicado em: 2015-05
-
4. Wave passage effects on the seismic response of a maglev vehicle moving on multi-span guideway
As a seismic wave travels along the separate supports of an extended structure, the structure is subjected to multiple-support excitation due to seismic wave propagation. Considering the seismic wave passage effect, this paper describes seismic analysis of a maglev vehicle moving on a multiply supported gudieway. The guideway system is modeled as a series of
Lat. Am. j. solids struct.. Publicado em: 2013-09
-
5. Estudo de um Sistema de NÃvel com Dois Tanques Interligados Sujeito a PerturbaÃÃes Utilizando Desigualdades Matriciais Lineares / Study of a system level with two tanks interconnected subject to disturbances using linear matrix inequalities
A teoria de controle robusto evoluiu consideravelmente ao longo das Ãltimas dÃcadas, apresentando soluÃÃes para vÃrios tipos de problemas de anÃlise, desempenho e sÃntese de sistemas lineares incertos. As desigualdades matriciais lineares (LMIs) e suas tÃcnicas surgiram como poderosas ferramentas em diversas Ãreas de engenharia de controle para proj
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/01/2012
-
6. Fuzzy logic for structural system control
This paper provides some information and numerical tests that aims to investigate the use of a Fuzzy Controller applied to control systems. Some advantages are reported regarding the use of this controller, such as the characteristic ease of implementation due to its semantic feature in the statement of the control rules. On the other hand, it is also hypoth
Lat. Am. j. solids struct.. Publicado em: 2012
-
7. Numerical solution of the variational PDEs arising in optimal control theory
An iterative method based on Picard's approach to ODEs' initial-value problems is proposed to solve first-order quasilinear PDEs with matrix-valued unknowns, in particular, the recently discovered variational PDEs for the missing boundary values in Hamilton equations of optimal control. As illustrations the iterative numerical solutions are checked against t
Computational & Applied Mathematics. Publicado em: 2012
-
8. System identification and active vibration control of a flexible structure
The aim of this paper is to illustrate the active control of vibration of a flexible structure using a model-based digital controller. The state-space model of the system is derived using a system identification technique known as the Observer/Kalman Filter Identification (OKID) method together with Eigensystem Realization Algorithm (ERA). Based on the measu
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
9. Metodologia para a alocação ótima discreta de sensores e atuadores piezoelétricos na simulação do controle de vibrações em estruturas de materiais compósitos laminados
O principal objetivo do controle de vibrações é a sua redução ou minimização, através da modificação automática da resposta estrutural. Em muitas situações isto é necessário para promover a estabilidade estrutural, e para alcançar o alto desempenho mecânico necessário em diversas áreas técnicas, tais como a engenharia aeroespacial, civil
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
10. Controle multivariável em redes de trocadores de calor com bypasses. / Multivariable control on a heat exchanger network with bypasses.
Atualmente, existe uma grande variedade de metodologias de controle que poderiam ser utilizadas e aplicadas a processos industriais. Algumas destas metodologias têm um projeto complexo, exigindo um estudo extra de engenharia para projetar um controlador com um desempenho excelente. Outros controladores não apresentam um desempenho tão bom, embora apresent
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/04/2011
-
11. Initial values for Riccati ODEs from variational PDEs
The recently discovered variational PDEs (partial differential equations) for finding missing boundary conditions in Hamilton equations of optimal control are applied to the extended-space transformation of time-variant linear-quadratic regulator (LQR) problems. These problems become autonomous but with nonlinear dynamics and costs. The numerical solutions t
Computational & Applied Mathematics. Publicado em: 2011
-
12. Controle de atitude de satélites artificiais utilizando um processador digital de sinais / Attitude control of satellites using a digital signal processor
This work deals with the development and implementation of an attitude control system for an artificial satellite using a Digital Signal Processor (DSP). The dissertation presents a complete study of the attitude movement modeling and control for the continuous time systems case, considering the Linear Quadratic Regulator (LQR) and Linear Quadratic Gaussian
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2010