Low Carbon Steel
Mostrando 1-12 de 115 artigos, teses e dissertações.
-
1. Characterization of Different Surface Layers Produced by Solid Boron-Nitro-Carburizing Thermochemical Treatment on AISI 1020
The aim of this study is to obtain and characterize surface layers on low carbon steel with the pack boron-nitro-carburizing process. Different mixtures of commercial powders (Turbonit® and Ekabor®) were used to investigate the case properties, microstructure and phases formation on AISI 1020 steel. A series of experiments were conducted in solid medium wi
Mat. Res.. Publicado em: 04/11/2019
-
2. Characterization of Austenite Decomposition in Steels with Different Chemical Concepts and High Potential to Manufacture Seamed Pipes for Oil and Gas Industry
This work presents the characterization of austenite decomposition kinetics in two steels during continuous cooling considering non-deformed austenite grains. Two different chemical concepts of steels were evaluated: low carbon - high manganese and a relatively new concept based on low carbon - low manganese - high niobium contents. Dilatometric experiments,
Mat. Res.. Publicado em: 21/10/2019
-
3. Glycerol Effect on the Corrosion Resistance and Electrodeposition Conditions in a Zinc Electroplating Process
Zinc electrodeposition is an economical process of Zn coating compared to conventional galvanic process. The galvanizing process is used in various industrial sectors to protect ferrous alloys during the corrosion process. In buildings, the galvanizing process is widely used to coat mortar protective screens. The electrodeposition of zinc has a relatively lo
Mat. Res.. Publicado em: 19/08/2019
-
4. Films Formed on Carbon Steel in Sweet Environments - A Review
Corrosion of carbon steel pipelines in sweet environments has been extensively researched on oil and natural gas exploration and production in order to obtain efficient corrosion mitigation methods. Although the consequences of corrosion are known, the cause and mechanism by which a certain phenomenon occurs are still not well understood. Sweet corrosion is
J. Braz. Chem. Soc.. Publicado em: 04/07/2019
-
5. Corrosion-cavitation-erosion: surface morphology study of a carbon steel in a multiphasic saline bath
ABSTRACT During the production of petroleum and gas, the equipments employed for this activity are subjected to synergetic wear mechanisms, such as corrosion, corrosion-cavitation and corrosion-cavitation-erosion. Laboratory experiments has been performed to reproduce some of these mechanisms, however, sometimes the tests is not capable to recreate the compl
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Investigation of Austenitic Stainless Steel Coatings on Mild Steel Produced by Friction Surfacing Using a Conventional CNC Machining Center
The friction surfacing process allows deposition of similar and dissimilar coatings in the solid state, avoiding some of the problems associated with conventional coating methods in which fusion is involved. In the present work, a viability assessment of producing AISI 304 austenitic stainless steel coatings on AISI 1020 low-carbon steel substrates using a m
Mat. Res.. Publicado em: 21/01/2019
-
7. Anticorrosive Effect of PVP 40000 Against AISI 1020 Carbon Steel in HCl
Polymers have received considerable attention for replacing synthetic inorganic and organic anti-corrosion inhibitors since they are not as toxic for the environment, besides being cheaper. Polyvinylpyrrolidone (PVP) has been studied due to its applicability, solubility, very low toxicity, cost and efficiency in corrosion inhibition against metals, such as z
Mat. Res.. Publicado em: 29/10/2018
-
8. Efecto de los parámetros de aplicación en recubrimientos de Ni-Cr-B-Fe-Si obtenidos por Flame Spray
ABSTRACT Surface damage of components in service is an issue of great industrial interest because of the costs associated to the replacement of certain critical components. There are several techniques to generate coatings, which provide increased resistance to a particular type of surface damage. In this way, it is achieved surface protection to different s
Matéria (Rio J.). Publicado em: 02/08/2018
-
9. Fatiga de contacto por rodadura en acero SAE 1050 recubierto con TiN, posteriormente templado
ABSTRACT The use of ceramic coatings of the nitride, carbide, or diamond type on steel substrates promotes the improvement of tribology properties. Nevertheless, high hardness gradients and adhesion problems may deteriorate the performance of these coatings when subjected to Rolling Contact Fatigue (RCF). Some studies on steels with ceramic coatings were car
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Evaluación del uso de acetileno como fuente de carbono en la carburización de aceros
ABSTRACT The effect of using acetylene as a carbon source in the gas carburization of AISI/SAE 8620 steel was evaluated in this work. For this purpose, a gaseous carburizing system was designed and manufactured with the following characteristics: controlled production of a carburant gaseous atmosphere, inert and hermetic isothermal reaction zone and carbon/o
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Estudio de la microestructura de un cordón de soldadura de un acero P91 mediante microscopía electrónica de transmisión
ABSTRACT In the present work the microstructural characterization of a single-pass weld of 9Cr1MoVNb P91 steel performed by the flux-cored arc welding (FCAW) process in the “as welding” condition has been carried out by means of transmission electron microscopy. P91 steel offers a good weldability, but the mechanical properties of the welded joints are f
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Método innovador de ensayos de impacto en altas temperaturas aplicado en aceros al carbono
ABSTRACT In this paper, an innovative method of impact tests at high temperature on sub-size Charpy V notched specimens is applied. The innovation lies in the method of heating the specimen, which is performed in situ on a Charpy impact machine type by alternating electrical current through the specimen. The specimens are heated in a few seconds (v=32 ºC/s)
Matéria (Rio J.). Publicado em: 19/07/2018