Load Transfer
Mostrando 1-12 de 117 artigos, teses e dissertações.
-
1. Comparison Between Three- and Four-coil Wireless Power Transfer Systems with Resonant Coils
Abstract In this paper, it is demonstrated that the efficiency and ability to transfer power to the load in three-coil wireless power transfer (WPT) systems are always higher than in equivalent four-coil ones. On the other hand, it is shown that there are features attainable in four-coil WPT system that are not in three-coil ones. For instance, in a four-coi
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
2. Modelagem da transferência de calor de ambientes subterrâneos no programa de simulação EnergyPlus
Resumo A temperatura do solo é um dos fatores mais influentes nas avaliações de desempenho térmico de ambientes subterrâneos e quase sempre é desconsiderada. Por isso, é necessário avaliar essa influência devido à interação do solo com a edificação, pois a transferência de calor através de paredes e pisos subterrâneos tem uma extensão signi
Ambient. constr.. Publicado em: 2019-03
-
3. XFEM Modelling in Multi-bolted Joints Using a Unified Bolt Preload
Abstract Multi-bolted joints are adopted and designed to provide efficient load transfer within assembled engineering parts. Bearing failure is favorable during design phase due to more progressive failure mode, however, ability of by-pass stress to be transferred to adjacent bolts in multi-bolted joints prone to catastrophic net-tension failure. Former appr
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
4. The Challenges of Rehabilitating the Hercilio Luz Suspension Bridge
Abstract The Hercílio Luz suspension bridge, built in 1926, has been out of service since 1991 due to high corrosion levels and structural element impairment. A complete rehabilitation project was developed which included the replacement of the impaired items and foundation strengthening. For this, an auxiliary structure was employed to support the central
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
5. Axial Static Load Dependence Free Vibration Analysis of Helical Springs Based on the Theory of Spatially Curved Bars
Abstract This work addresses an accurate and detailed axial static load dependence linearly elastic free vibration analysis of cylindrical helical springs based on the theory of spatially curved bars and the transfer matrix method. For a continuous system, governing equations comprise coupled vibration modes namely transverse vibrations in two orthogonal pla
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
6. Effect of cantilever length and alloy framework on the stress distribution in peri-implant area of cantilevered implant-supported fixed partial dentures
ABSTRACT Because many mechanical variables are present in the oral cavity, the proper load transfer between the prosthesis and the bone is important for treatment planning and for the longevity of the implant-supported fixed partial denture. Objectives To verify the stress generated on the peri-implant area of cantilevered implant-supported fixed partial d
J. Appl. Oral Sci.. Publicado em: 2016-04
-
7. Aerothermoelastic Analysis of Functionally Graded Plates Using Generalized Differential Quadrature Method
Abstract In the present paper, the aerothermoelastic behavior of Functionally Graded (FG) plates under supersonic airflow is investigated using Generalized Differential Quadrature Method (GDQM). The structural model is considered based on the classical plate theory and the von Karman strain-displacement relations are utilized to involve the nonlinear behavio
Lat. Am. j. solids struct.. Publicado em: 2016-04
-
8. Uncracked joints in plain concrete pavements: causes, effects and possibilities of improvements
AbstractDuring the construction of Jointed Plain Concrete Pavements (JPCPs) in Chile, it was observed that joints remained uncracked. The objectives of this paper are to evaluate the effects of uncracked joints (UnCrJ) in JPCPs and to propose possible solutions or improvements to avoid or minimize this phenomenon. Considering low thermal amplitude as cause o
J. Transp. Lit.. Publicado em: 2016-03
-
9. EFFECT OF SECOND TOE-TO-HAND TRANSFER ON THE PLANTAR PRESSURE DISTRIBUTION OF THE DONOR FOOT
ABSTRACT Objective: To investigate the effect of second toe-to-hand transfer on the plantar pressure distribution of the donor foot. Methods: Twelve normal fresh-frozen cadaveric foot specimens were subjected to an axial load of 600 N. An F-Scan plantar pressure analysis system was used to measure the forefoot plantar pressure. The testing was performed
Acta ortop. bras.. Publicado em: 2016-02
-
10. Maximum Power Transfer versus Efficiency in Mid-Range Wireless Power Transfer Systems
AbstractThe condition for maximum power transfer of 2-coils wireless power transfer (WPT) system is derived from circuit analysis and discussed together with the respective WPT system efficiency (η). In the sequence, it is shown that a 4-coils WPT system (which can be divided in source, two communication and load circuits) without power losses at the two co
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-06
-
11. Fracture initiation from initial spherical flaws in incompressible propellant materials
The scope of the present article is the study of the fracture initiation from initial spherical flaws in incompressible propellant materials. Using a constitutive law, derived from the neo-Hookean strain energy function, one may deduce the relation between the radial pressure applied at infinity and the corresponding extension ratio, at the surface of the ca
Matéria (Rio J.). Publicado em: 2015-06
-
12. Configuration Study of Structurally Integrated Thermal Protection Systems for a Sub-Orbital Platform
ABSTRACT: The atmospheric hypersonic flight of sub-orbital and space vehicles generates aerodynamic heating and high wall heat fluxes, inducing high temperatures on the vehicle's structures and affecting their mechanical behavior, besides degrading the operation of board equipment. Furthermore, since payload preservation is always mandatory, the use of effic
J. Aerosp. Technol. Manag.. Publicado em: 2015-06