Lldpe
Mostrando 1-12 de 29 artigos, teses e dissertações.
-
1. Propriedades mecânicas e térmicas das blendas e nanocompósitos de UHMWPE/LLDPE/CNT para aplicação balística
RESUMO O desenvolvimento de placas do nanocompósito de UHMWPE/LLDPE/CNT tem como objetivo a obtenção de um material para aplicação em blindagem balística híbrida de alto impacto em forma de multicamadas de cerâmica/polímero. O compósito polimérico é utilizado na base da blindagem com a função de absorver a energia cinética residual do projéti
Matéria (Rio J.). Publicado em: 06/12/2018
-
2. Effect of PANI on Thermal, Mechanical and Electromagnetic Properties of HDPE/LLDPE/PANI Composites
In this work, polyaniline (PANI) in emeraldine-base form, synthesized by chemical oxidation polymerization, was protonated with hydrochloric acid (HCl). Composites based on high-density polyethylene (HDPE) and linear-low density polyethylene (LLDPE) blends with PANI were prepared in molten condition using a torque rheometer. The effect of compatibilizer agen
Mat. Res.. Publicado em: 11/12/2017
-
3. The influence of long chain branches of LLDPE on processability and physical properties
Two polyethylene-based on single-site metallocene catalyst (mLLDPE) were selected to characterize the effect of long chain branching (LCB) on blown film processability, optical and mechanical properties. 13C NMR and parallel plate rheology were used to identify LCB presence on LLDPEs. Blown films were produced from 100% LLDPEs using three different machine d
Polímeros. Publicado em: 04/12/2015
-
4. Silane Crosslinked Polyethylene from Different Commercial PE’s: Influence of Comonomer, Catalyst Type and Evaluation of HLPB as Crosslinking Coagent
In the present work, the synthetic route to obtain crosslinked polyethylene (PEX) was studied using vinyltrimethoxy silane (VTMS) as crosslink agent and commercial polyethylene (HDPE and LLDPE). Materials were processed with increasing amounts of VTMS (2.5, 5.0 and 7.5 wt.%). After insertion of silane onto polymer chain in solid state, samples were molded by
Mat. Res.. Publicado em: 2015-04
-
5. Determination of non-isothermal crystallization rate constant of a rotational molding grade LLDPE
The purpose of the present paper was to test the validity of the nonlinear regression method for calculating the non-isothermal crystallization rate constant of the Nakamura's model of a rotational molding grade LLDPE directly from non-isothermal crystallization experiments carried out in a single cell DSC. Cooling rates of 50, 40, 30, 20, 10 and 5 oC/min we
Matéria (Rio J.). Publicado em: 2015-03
-
6. Thermoplastic elastomers blends based on linear low density polyethylene, ethylene-1-octene copolymers and ground rubber tire
Blends of linear low density polyethylene (LLDPE) ethylene-1-octene copolymers (EOC), with different 1-octene (OC) content, and ground rubber tire (GRT) were prepared by melt mixing in a twin screw extruder. Five different compositions of LLDPE/EOC/GRT blends were processed in the extruder to evaluate the effect of EOC addition to the LLDPE/GRT blends. The a
Polímeros. Publicado em: 2014
-
7. Avaliação comparativa entre os nanocompósitos de argila motmorilonita/LLDPE e com hexaniobato de potássio/LLDPE: caracterização das propriedades mecânicas e de transporte
Nanocompósitos de LLDPE/argila montmorilonita e LLDPE/niobato organofilizado foram obtidos através da diluição de um concentrado da respectiva carga em uma extrusora dupla rosca obtendo-se concentrações finais de 1,5 a 10,0% em carga. No presente estudo utilizou-se o ensaio mecânico de tração e o de permeação ao vapor de água e ao oxigênio para
Polímeros. Publicado em: 2014
-
8. Processing of a LLDPE/HDPE pressure vessel liner by rotomolding
Biaxial rotational molding is a low-pressure process that uses a polymer powder to produce large and/or complex-shaped hollow thermoplastic goods using low cost molds, being very suitable for prototype production. In the present work, liner prototypes (F 78 × 280 mm) made of linear low density (LLDPE) and high density polyethylene (HDPE) blends were produce
Mat. Res.. Publicado em: 08/11/2013
-
9. Nanocompósitos de blendas HDPE/LLDPE e OMMT - parte I: avaliação das propriedades termo-mecânicas e da resistência ao intemperismo
Nanocompósitos de blendas de polietileno de alta densidade (HDPE) com polietileno linear de baixa densidade (LLDPE) e OMMT (montmorilonita organofílica) foram preparados sob fusão em extrusora de dupla-rosca, utilizando HDPE-g-MA como agente compatibilizante. A caracterização estrutural foi realizada por análises de difração de raios X em alto ângul
Polímeros. Publicado em: 26/07/2013
-
10. Nanocompósitos de blendas HDPE/LLDPE e OMMT - Parte II: avaliação das propriedades térmica, óticas e de transporte a gases
Nanocompósitos de blendas de polietileno de alta densidade (HDPE) com polietileno linear de baixa densidade (LLDPE) e OMMT (montmorilonita organofílica) foram preparados sob fusão em extrusora de dupla-rosca, utilizando HDPE-g-MA como agente compatibilizante. Os nanocompósitos foram caracterizados através das propriedades térmicas, óticas e de transpo
Polímeros. Publicado em: 2013
-
11. Avaliação de sistemas compatibilizantes nas correlações entre processamento e propriedades térmicas, mecânicas e de transporte em nanocompósitos de blenda HDPE/LLDPE e OMMT / Evaluation of compatibilizing systems on the correlations between processing and thermal, mechanical and transport properties of hdpe/lldpe blend-based nanocomposites
A obtenção de nanocompósitos de matriz poliolefínica vem despertando grande interesse tecnológico e científico devido a possibilidade de incrementos significativos nas propriedades térmicas, mecânicas e de barreira dessa matriz. Entretanto, a natureza hidrofóbica das poliolefinas dificulta a dispersão e esfoliação das lamelas de nanoargila na mat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/04/2012
-
12. Mechanical properties and thermal behaviour of LLDPE/MWNTs nanocomposites
Multi-walled carbon nanotubes (MWNTs) were incorporated into a linear low-density polyethylene (LLDPE) matrix through using screw extrusion and injection technique. The effect of different weight percent loadings of MWNTs on the morphology, mechanical, and thermal of LLDPE/MWNTs nanocomposite had been investigated. It was found that, at low concentration of
Mat. Res.. Publicado em: 02/10/2012