Linear Elastic Fracture Mechanics
Mostrando 1-12 de 18 artigos, teses e dissertações.
-
1. Estudo das Trincas Retas com o Método dos Elementos de Contorno, a Função de Green Numérica e a Técnica da Dupla Reciprocidade
RESUMO Nos últimos anos, o Método dos Elementos de Contorno (MEC) tem sido aplicado com sucesso a problemas da mecânica da fratura linear elástica (MFLE) envolvendo os casos estático e dinâmico. Para resolver problemas com ações de domínio (por exemplo: forças gravitacionais, problemas transientes com velocidades e acelerações, etc.) via MEC, Nar
TEMA (São Carlos). Publicado em: 10/06/2019
-
2. A New Displacement-based Approach to Calculate Stress Intensity Factors With the Boundary Element Method
Abstract The analysis of cracked brittle mechanical components considering linear elastic fracture mechanics is usually reduced to the evaluation of stress intensity factors (SIFs). The SIF calculation can be carried out experimentally, theoretically or numerically. Each methodology has its own advantages but the use of numerical methods has become very popu
Lat. Am. j. solids struct.. Publicado em: 2015-09
-
3. Interaction Analysis of Non-aligned Cracks Using Extended Finite Element Method
Abstract Multiple flaws are frequently occurred in actual components, such as pressure vessels and power plants. These flaws will in some circumstances lead to more severe effects than single flaw alone. Assessment of the interaction behavior is based on the evaluation of alignment and combination of these multiple flaws. In the current standards, multiple c
Lat. Am. j. solids struct.. Publicado em: 2015
-
4. Um novo algoritmo para modelagem de mecânica da fratura usando o método dos elementos de contorno. / A novel algorithm fot the modeling of fracture mechanics using the boundary element method.
Este trabalho trata da análise de problemas da Mecânica da Fratura Elástica Linear (MFEL) utilizando o Método dos Elementos de Contorno (MEC). Esse método constitui uma poderosa e precisa técnica de análise numérica. A necessidade da discretização somente do contorno do modelo é um dos grandes atrativos do MEC. Na Mecânica da Fratura, o MEC é ad
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/03/2010
-
5. Estudo da influência da taxa de solicitação na resposta em fratura quase-frágil / A study of loading rate influence in the quasi-brittle fracture response
A pesquisa objeto desta tese refere-se a uma investigação dos processos de fratura no concreto de alta resistência (High Strength Concrete - HSC), com ênfase no estudo da influência da taxa de carregamento (medida como a taxa de deslocamento do ponto de aplicação de carga) nos ensaios de fraturamento e assim caracterizar sua ductilidade em tração. N
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/02/2010
-
6. Tenacidade à fratura translaminar dinâmica de um laminado híbrido metal-fibra titânio-grafite de grau aeronáutico / Dynamic translaminar fracture toughness of aeronautical grade titanium-graphite hybrid fiber-metal laminate
Several dynamic translaminar fracture toughness criteria have been determined for TiGr hybrid fiber-metal laminate through Linear Elastic (K-factor) and Elastic-Plastic (J-integral) Fracture Mechanics (LEFM and EPFM, respectively) concepts and methodologies. Instrumented Charpy impact testing was carried out over a wide range of temperatures under two loadin
Publicado em: 2009
-
7. Experimental characterization of a reactor nozzles injetores of fast pirolise to waste conversion in refineries / Caracterização experimental de bicos injetores de um reator de pirolise rapida para conversão de residuo em refinarias
This thesis presents an analysis of problems of linear elastic fracture mechanics in anisotropic bimaterial structures. Using the boundary element method, it is possible to evaluate stress intensity factors in plane problems (2D) due to the presence of interfacial cracks between the laminae that constitute the material, when the structure is submitted to a m
Publicado em: 2008
-
8. EFEITO DA TENSÃO NOMINAL NO TAMANHO E FORMA DA ZONA PLÁSTICA / THE ESTIMATES OF THE SIZE AND SHAPE OF THE PLASTIC ZONES, TRADITIONALLY USED IN THE NOMINAL STRESS IN FRACTURE MECHANICS
The estimates of the size and shape of the plastic zones, traditionally used in Linear Elastic Fracture Mechanics (LEFM), are based on the supposition that the stress intensity factor (SIF) KI (or KII or KIII) is the only necessary parameter to describe them. However, when the linear elastic stress analysis problem is solved in an Inglis plate, or the cracke
Publicado em: 2007
-
9. Characteristics of the double-torsion test to determine the R-curve of ceramic materials
Double-torsion tests were carried out on a commercial ceramic floor tile to verify whether this test is suitable for determining the R-curve of ceramics. The instantaneous crack length was obtained by means of compliance calibration, and it was found that the experimental compliance underestimates the real crack length. The load vs. displacement curves were
Materials Research. Publicado em: 2006-12
-
10. Formulação do método dos elementos de contorno para análise de fratura / Boundary element formulations applied to fracture mechanics
No contexto do método dos elementos de contorno, este trabalho apresenta comparativamente três formulações em distintos aspectos. Visando a análise de sólidos bidimensionais no campo da mecânica da fratura, primeiramente é estudada a equação singular ou em deslocamentos. Em seguida, a formulação hiper-singular ou em forças de superfície é aval
Publicado em: 2006
-
11. Elastic-plastic fracture toughness with non standard specimes for API 5L steel : numerical and experimental analysis / Tenacidade a fratura em condições elasto-plasticas com corpos de prova não normalisados para aços API 5L : analise numerica e experimental
The gas pipeline Bolivia-Brazil was manufactured with pipes of API 5L X65 and X70 steels. Specialized literature report that the stress field in the neighborhood of the crack tip and the fracture toughness are similar between not standard single edge notch tensile specimens - SE(T) - and pipes. In this work numerical and experimental study were made of the e
Publicado em: 2006
-
12. H-adaptative formulation of the boundary element method for elastic bidimensional with emphasis in the propagation of the fracture / Formulação h-adaptativa do método dos elementos de contorno para elasticidade bidimensional com ênfase na propagação da fratura
Neste trabalho desenvolveu-se uma formulação adaptativa do método de elementos de contorno (MEC) para a análise de problemas de fratura elástica linear. Foi utilizado o método da colocação para a formulação das equações integrais de deslocamento e de tensão. Para a discretização das equações integrais foram utilizados elementos lineares que
Publicado em: 2006