Linear And Nonlinear Analysis Methods
Mostrando 13-24 de 119 artigos, teses e dissertações.
-
13. Analysis and Design of Reinforced Concrete Deep Beams by a Manual Approach of Stringer-Panel Method
Abstract D-regions are defined by its non-linear strain distribution over a cross section. Deep beams are an example of D-regions, as most of its load is usually directly delivered to supports by arch mechanism. The present paper focus on the Stringer-Panel Method (SPM), an alternative procedure to some well-known methods for designing this type of structure
Lat. Am. j. solids struct.. Publicado em: 2016-06
-
14. THERMAL PERFORMANCE OF REFRIGERATED VEHICLES IN THE DISTRIBUTION OF PERISHABLE FOOD
The temperature of refrigerated products along the distribution process must be kept within close limits to ensure optimum food safety levels and high product quality. The variation of product temperature along the vehicle routing sequence is represented by non-linear functions. The temperature variability is also correlated with the time required for the re
Pesqui. Oper.. Publicado em: 2015-08
-
15. Long-term correlation of the electrocorticogram as a bioindicator of brain exposure to ionizing radiation
Understanding the effects of radiation and its possible influence on the nervous system are of great clinical interest. However, there have been few electrophysiological studies on brain activity after exposure to ionizing radiation (IR). A new methodological approach regarding the assessment of the possible effects of IR on brain activity is the use of line
Braz J Med Biol Res. Publicado em: 12/06/2015
-
16. Application of the Complex Variable Semi-analytical Method for Improved Displacement Sensitivity Evaluation in Geometrically Nonlinear Truss Problems
AbstractThe application of gradient-based methods to structural optimization problems usually requires the determination of displacement sensitivities with respect to design variables. In this regard, it is important to have at hand comprehensive methods for sensitivity analysis, which show stability, efficiency and accuracy. Particularly, application of the
Lat. Am. j. solids struct.. Publicado em: 2015-05
-
17. QSAR Study of the Inhibitors of the Acetyl-CoA Carboxylase 1 and 2 using Bayesian Regularized Genetic Neural Networks: A Comparative Study
Linear and non-linear quantitative structure-activity relationship (QSAR) models were presented for modeling and predicting anti-diabetic activities of a set of inhibitors of acetyl-CoA carboxylase 1 and 2 (ACC1 and ACC2). Different algorithms were utilized to choose the best variables among large numbers of descriptors and then these selected descriptors we
J. Braz. Chem. Soc.. Publicado em: 2015-03
-
18. A finite element study on the mechanical behavior of reciprocating endodontic files
AIM: To evaluate the mechanical behavior of reciprocating endodontic files, comparing nickel-titanium NiTi and stainless steel 316L St.St. 316L as manufacturing material for such instruments. METHODS: A three-dimensional finite element model was designed for this study. The simplified instrument model geometry was created on commercial CAD/CAM software. Rea
Braz. J. Oral Sci.. Publicado em: 2015-03
-
19. Composed Mathematical-Informational modeling of column-base connections
Depending on the type of structural analysis required, any moment-rotation curve representation can be used; these include linear, bilinear, multi-linear and nonlinear representations. The most accurate representation uses continuous nonlinear functions. In this study, two distinct approaches are proposed to account for the complex hysteretic behavior of col
Lat. Am. j. solids struct.. Publicado em: 2014-12
-
20. Establishing the minimal number of virtual reality simulator training sessions necessary to develop basic laparoscopic skills competence: evaluation of the learning curve
Introduction Medical literature is scarce on information to define a basic skills training program for laparoscopic surgery (peg and transferring, cutting, clipping). The aim of this study was to determine the minimal number of simulator sessions of basic laparoscopic tasks necessary to elaborate an optimal virtual reality training curriculum. Materials a
Int. braz j urol.. Publicado em: 2013-09
-
21. Estimação e previsão da estrutura a termo das taxas de juros usando técnicas de inteligência computacional / Term structure of interest rate modeling and forecasting using computational intelligence techniques
This work proposes the term structure of interest rates modeling and forecasting using computational intelligence techniques, based on data from the US and Brazilian fixed income markets. The yield curve modeling includes the use of some evolutionary computation methods like Genetic Algorithms, Differential Evolution and Evolution Strategies in comparison wi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/06/2012
-
22. Modelagem do comportamento dinâmico de edifícios mistos (aço-concreto) submetidos à ação do vento. / Modeling of the dynamic behaviour of steel-concrete composite buildings submited to wind actions.
Based on a favorable economic scenario and technological advances of material sciences and construction processes, in the last three decades, the Brazilian cities have presented a substantial growth, with respect to construction of residential and commercial multi-storey buildings. Nowadays, these buildings present greater slenderness and have been construct
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/05/2012
-
23. Análise termodinâmica de processos de reforma do metano e da síntese Fischer-Tropsch / Thermodynamic analysis of methane reforming processes and Fischer-Tropsch synthesis
The reactions of reforming of light hydrocarbons, especially natural gas, are chemical reactions of great importance and represent key steps for large scale production of hydrogen for use in hydrogenation reactions or fuel cells, or synthesis gas production, for application in the ammonia or methanol production, or to Fischer-Tropsch (FT) synthesis. The Fisc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2012
-
24. Estimação indireta de modelos R-GARCH / Indirect inference of R-GARCH models
Linear processes do not capture the structure of financial data. There is a large variety of nonlinear models available in literature. The class of ARCH models (Autoregressive Conditional Heterokedastic) was introduced by Engle (1982) in order to estimate inflation\ s variance. The idea is that, in this class, returns are serially uncorrelated, but the volat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/03/2012