Laser Spectroscopy
Mostrando 13-24 de 265 artigos, teses e dissertações.
-
13. Mechanical and Metallurgical Characterization of Laser Welding on P91 Ferritic Steel and Incoloy 800HT Dissimilar Joints
In this work, microstructural characterization and mechanical properties of P91 and Incoloy 800HT dissimilar laser beam welded joint were analyzed. In addition to that, metallographical studies were conducted using Optical microscopy, Scanning electron microscopy (SEM) equipped with Energy-dispersive X-ray spectroscopy (EDX) and X-Ray diffraction analysis (
Mat. Res.. Publicado em: 01/02/2018
-
14. Biocorrosion on Surface of ASTM A283 Carbon Steel, Exposed in Diesel S10 and Tap Water
This paper sets out to evaluate the corrosion and biocorrosion of carbon steel ASTM A283 exposed to a Diesel S10 oil/tap water system under static conditions for 90 days. The following analyzes were performed: physico-chemical in tap water, sulfur content in Diesel S10 and quantification of sessile microorganisms in the biofilm formed on the metal. To monito
Mat. Res.. Publicado em: 22/01/2018
-
15. Electrochemical Study of the AISI 409 Ferritic Stainless Steel: Passive Film Stability and Pitting Nucleation and Growth
The aim of the present work was to study the passive film stability and pitting corrosion behavior of the AISI 409 stainless steel. The electrochemical tests were carried out in 0.1 M NaCl solution at room temperature. The general electrochemical behavior was assessed using electrochemical impedance spectroscopy (EIS) measurements whereas the semiconducting
Mat. Res.. Publicado em: 18/09/2017
-
16. Confocal Fluorescence Microscopy and Kinetics of the Cr 3+-Chromate Ion Oxidation Equilibria at the Solid Liquid Interface
Silica-borax pearl samples impregnated with 0.17 and 0.64% Cr3+ were characterized by specific surface area measurements, UV-Vis spectroscopy, energy-dispersive X-ray fluorescence and laser-scanning confocal microscopy. Pearl stability against oxidizing conditions was tested by adding samples to an aqueous hydrogen peroxide solution. The reaction was examine
J. Braz. Chem. Soc.. Publicado em: 2017-09
-
17. ESTUDO QUÍMICO DE EFLORESCÊNCIAS SALINAS DO SÍTIO ARQUEOLÓGICO TOCA EXÚ DO JURUBEBA DO PARQUE NACIONAL SERRA DA CAPIVARA, PIAUÍ, BRASIL
Toca Exú do Jurubeba is part of a set of archaeological sites located in the Serra da Capivara National Park (Piauí, Brazil), a region of great world interest due to its archaeological potential, especially rock art. However, rock art is constantly threatened by both natural and anthropic factors. Among the natural salts efflorescences that are deposited o
Quím. Nova. Publicado em: 2017-09
-
18. Thermoplastic Elastomers Containing Zinc Oxide as Antimicrobial Additive Under Thermal Accelerated Ageing
Styrene-ethylene/butylene-styrene (SEBS) copolymer- based thermoplastic elastomers (TPE) are applied in the production of household items used in places with conditions for microbial development. Metal oxides like zinc oxide (ZnO) and others can be added to the TPE composition to prevent microbial growth. The aim of this study is to evaluate the effect of th
Mat. Res.. Publicado em: 17/08/2017
-
19. Does laser diode irradiation improve the degree of conversion of simplified dentin bonding systems?
Abstract Simplified dentin-bonding systems are clinically employed for most adhesive procedures, and they are prone to hydrolytic degradation. Objective This study aimed to investigate the effect of laser diode irradiation on the degree of conversion (DC), water sorption (WS), and water solubility (WSB) of these bonding systems in an attempt to improve the
J. Appl. Oral Sci.. Publicado em: 2017-08
-
20. Synthesis of Vanadium Interface for HFCVD Diamond Deposition on Steel Surface
Laser cladding of vanadium carbide powder developed an interlayer on AISI D6 steel as a diffusional barrier and to relief thermal residual stress. Laser cladding experiments varied resolution (DPI) and scanning speed (mm/s). CVD diamond deposition on this interface went on by HFCVD technique. The coatings were characterized by X-ray diffraction analysis (XRD
Mat. Res.. Publicado em: 06/07/2017
-
21. Isolation of biologically active peptides from the venom of Japanese carpenter bee, Xylocopa appendiculata
Abstract Background Mass spectrometry-guided venom peptide profiling is a powerful tool to explore novel substances from venomous animals in a highly sensitive manner. In this study, this peptide profiling approach is successfully applied to explore the venom peptides of a Japanese solitary carpenter bee, Xylocopa appendiculata (Hymenoptera: Apoidea: Apida
J. Venom. Anim. Toxins incl. Trop. Dis. Publicado em: 06/07/2017
-
22. Laser cooling techniques: standard and alternated optical molasses
The technique of laser cooling, whose basic idea was proposed in 1975 [1], provided the development of many important areas like high-resolution spectroscopy [2], atomic clocks [3] and quantum gases confined in magnetic or optical traps [4, 5]. Among the techniques applied to cooling neutral atoms is the optical molasses [6] that will be explored in this wor
Rev. Bras. Ensino Fís.. Publicado em: 22/05/2017
-
23. Effect of La 0.8 Sr 0.2 MnO 3 powder addition in the precursor solution on the properties of cathode films deposited by spray pyrolysis
ABSTRACT Films of lanthanum strontium manganite, LSM (La0.8Sr0.2MnO3) were deposited on yttria stabilized zirconia (YSZ) substrates by different methods aiming to establish the most suitable route to prepare cathodes for solid oxide fuel cells (SOFC). Samples were obtained by using a solution of lanthanum, strontium and manganese nitrates or a dispersion of
Matéria (Rio J.). Publicado em: 11/05/2017
-
24. Comparison of ICP OES and LIBS Analysis of Medicinal Herbs Rich in Flavonoids from Eastern Europe
Essential and toxic metals were determined in eighteen samples of medicinal herbs from Poland, Lithuania and Serbia by means of laser-induced breakdown spectroscopy (LIBS) and inductively coupled plasma optical emission spectrometry (ICP OES). Calcium, K and Mg concentrations were obtained in % (m/m) and other metals (Na, Co, Cu, Fe, Mn, Ni, Zn, Cd, Cr and P
J. Braz. Chem. Soc.. Publicado em: 2017-05