Lanthanum
Mostrando 13-24 de 149 artigos, teses e dissertações.
-
13. Efeito da modificação com estrôncio na microestrutura e nas propriedades mecânicas da liga 356 / Effect of strontium on the microstructure and mechanical properties alloys 356
The properties of aluminum-silicon alloys are strongly dependent on the casting process used, the chemical additions made to control eutectic structure, primary silicon and grain structure, and molten metal treatment to reduce hydrogen gas content and to remove inclusions. Modification treatments transform the flake eutectic silicon into a fibrous form produ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
14. ProduÃÃo de biodiesel empregando catalisadores nanoestruturados do tipo SBA-15 modificada com lantÃnio / Production of biodiesel using SBA-15 nanostructured silica modified with Lanthanum as catalyst
O objetivo desta dissertaÃÃo foi estudar a aplicaÃÃo da sÃlica mesoporosa SBA-15 modificada com lantÃnio como catalisador heterogÃneo nas reaÃÃes de transesterificaÃÃo e esterificaÃÃo visando à produÃÃo de biodiesel. Para isso sintetizou-se o catalisador La-SBA-15 variando a razÃo molar Si/La em 25, 50 e 75. O catalisador heterogÃneo La-SBA
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/01/2012
-
15. LaCrO3 composite coatings for AISI 444 stainless steel solid oxide fuel cell interconnects
Doped lanthanum chromite-based ceramics are the most widely used interconnector material in solid fuel cells (SOFC) since they exhibit significant electrical and thermal conductivity, substantial corrosion resistance and adequate mechanical strength at ambient and high temperatures. The disadvantage of this material is its high cost and poor ductility. The a
Mat. Res.. Publicado em: 23/10/2012
-
16. Efeito da adição de lantânio em catalisadores de Ni/ZrO2 aplicados na reação de reforma a vapor de etanol
The catalytic performance of Ni/ZrO2 catalysts loaded with different lanthanum content for steam reforming of ethanol was investigated. Catalysts were characterized by BET surface area, X-ray diffraction, UV-vis spectroscopy, temperature programmed reduction, and X-ray absorption fine structure techniques. Results showed that lanthanum addition led to an inc
Química Nova. Publicado em: 2012
-
17. Síntese de manganita dopada com estrôncio e cobaltita dopada com antimônio e caracterização microestrutural
The great variety of properties of oxides with the perovskite structure allows their application in several fields of technology. Specially, the electrochemical properties and the thermal stability of some of these compounds make these materials the most used in devices for energy generation such as the solid oxide fuel cells (SOFC). SOFC¿s are devices the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
18. Synthesis and characterization of manganite-cromite lanthanum doped with ruthenium anodes for solid oxide fuel cells / Síntese e caracterização de manganita-cromita de lantânio dopada com rutênio para anodos de células a combustível de óxidos sólidos
Diversos anodos para célula a combustível de óxido sólido (SOFC) têm sido estudados devido aos problemas de deterioração dos anodos tradicionalmente usados, os compósitos à base de zircônia estabilizada/Ni (YSZ/Ni). Estudos prévios evidenciaram que a perovskita La0,75Sr0,25Cr0,50Mn0,50O3 (LSCM) possui desempenho similar em SOFCs usando hidrogênio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/08/2011
-
19. Esterification process to synthesize isopropyl chloroacetate catalyzed by lanthanum dodecyl sulfate
Isopropyl chloroacetate has been synthesized by esterification of chloroacetic acid and isopropanol, using lanthanum dodecyl sulfate (LDDS) as the catalyst. Various factors that affected the esterification have been investigated, such as reaction time, different water-carrying agent and the amount of catalyst. Under the condition of 1.2/1 molar ratio of isop
Brazilian Journal of Chemical Engineering. Publicado em: 2011-06
-
20. Synthesis and characterization of La1-xSr xMnO3±δ powders obtained by the polymeric precursor route
Polycrystalline strontium-doped lanthanum manganite (LSM) powders with 0.15, 0.22, and 0.30 mol % Sr were synthesized by the polymeric precursor route using a molar ratio of 3:1 citric acid and metal cations. The powders were characterized by Fourier transform infrared spectroscopy, thermal analysis, high-temperature X-ray diffraction to determine the crysta
Materials Research. Publicado em: 01/04/2011
-
21. Remediação de sedimentos eutróficos da Represa Ibirité (MG) pela adição de nitrato e Phoslock: experimentos em laboratório / Remediation of Eutrophic Sediments by the Addition of Nitrate and Phoslock: Laboratory experiments
Ibirité Reservoir (Ibirité/Sarzedo, MG) receives untreated effluents and raw sewage from the city of Ibirité and surroundings, which are the main cause of the eutrophication of this ecosystem. Past studies have shown that sediment is a significant internal source of nutrients (ammonium and orthophosphate ions) to the water column. Within this context, the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/12/2010
-
22. Síntese, processamento e caracterização das meia-células de óxido sólido catodo/eletrólito de manganito de lantânio dopado com estrôncio/zircônia estabilizada com ítria / Synthesis, processing and characterization of the solid oxide half-cells cathode/electrolyte of strontium-doped lanthanum manganite/yttria-stabilized zirconia
Os filmes cerâmicos de manganito de lantânio dopado com estrôncio (LSM) e de manganito de lantânio dopado com estrôncio/zircônia estabilizada com ítria (LSM/YSZ) são utilizados como catodos das células a combustível de óxido sólido de temperatura alta (CaCOSTA). Estes filmes cerâmicos porosos foram depositados sobre o substrato cerâmico denso d
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/02/2010
-
23. Desidratação de etanol sobre material nanoestruturado do tipo LaSBA-15
La-incorporated SBA-15 mesopourous molecular sieves (LaSBA-15) were directly synthesized with aim to convert ethanol to ethylene. The samples were characterized by XRD, XRF, nitrogen sorption and acidity, by thermodesorption of n-buthylamine. The results have indicated that all the samples have showed high ordered mesostructure with a large average pore size
Química Nova. Publicado em: 2010
-
24. Síntese, caracterizaçao e propriedades catalicas da peneira molecular nanoestruturada modificada com lantanio
A peneira molecular nanoestruturada SBA-15 foi sintetizada pelo método hidrotérmico, e modificada com lantânio com razões molares Si/La de 25, 50, 75 e 100. Os materiais obtidos foram avaliados como catalisador para a reação modelo de craqueamento de n-hexano. Os materiais mesoporosos tipo SBA-15 e LaSBA-15 foram sintetizados utilizando tetraetilortosi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/08/2009