Kissinger
Mostrando 1-12 de 45 artigos, teses e dissertações.
-
1. Síntese e caracterização de pó de mulita monofásico derivado de sol-gel
Resumo Pó precursor de mulita microfina de alta pureza de composição estequiométrica, 3Al2O3.2SiO2, foi sintetizado por rota sol-gel usando isopropóxido de alumínio e tetraetoxissilano. O pó precursor de mulita foi caracterizado por área de superfície BET, distribuição de tamanho de partícula, espectroscopia no infravermelho por transformada de F
Cerâmica. Publicado em: 2020-09
-
2. A New Energetic Complex: Synthesis, Structure, and Combustion Catalysis Performance
The potential of tetrazole-based ligands for forming energetic complexes applied in pyrotechnics and propellants is demonstrated with the use of 5,5’-(1,3-phenylene)bis(1H-tetrazole) (H2BTB) to generate an energetic complex with high energy. A new energetic complex of PbII-tetrazolate, [Pb2(BTB)2(H2O)8]·5H2O (1), was synthesized and structurally character
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
3. Kinetic parameters study for the slow pyrolysis of coffee residues based on thermogravimetric analysis
Thermal decomposition of coffee husks was investigated by thermogravimetric analyses. The proximate, ultimate and composition analyses were performed. Thermogravimetric tests were realized, the material was heated to 1173 K using five heating rates: 5, 10, 15, 20, 25 K min-1. The kinetic parameters were estimated using the methods of Kissinger-Akahira-Sunose
Quím. Nova. Publicado em: 2020-04
-
4. A preliminary overview of the Brazilian Apioninae (Coleoptera: Brentidae) with an illustrated key for genera, and a checklist with distribution information
Resumo: O conhecimento sobre a diversidade taxonômica da fauna de Apioninae (Coleoptera: Brentidae) do Brasil é atualizado com base na literatura disponível e exame de material depositado nas principais coleções públicas do país. Dez gêneros e de 89 espécies válidas foram incluídas em 30 novos registros de distribuição (25 gêneros e cinco espé
Biota Neotrop.. Publicado em: 10/10/2019
-
5. DETERMINAÇÃO DOS PARÂMETROS CINÉTICOS E SIMULAÇÃO COMPUTACIONAL DO PERFLUOROPOLIÉTER (PFPE) EMPREGADO COMO LUBRIFICANTE SINTÉTICO
This work aims to determine the kinetic parameters of the thermal decomposition of a lubricating grease based on perfluoropolyether (PFPE) and the computational simulation of this decomposition. The determination of kinetic parameters of thermal decomposition was done by thermal analysis using thermogravimetry (TG) at different heating rates (β) of 10, 15 a
Quím. Nova. Publicado em: 26/08/2019
-
6. ESTIMATIVA DE VIDA ÚTIL DO PBX (plastic-bonded explosive) COM ENVELHECIMENTO ACELERADO
This article aims to estimate the shelf life of the PBX by thermal analysis estimated by the Arrhenius equation, equivalent to the time of storage at accelerated aging. The PBX was subjected to accelerated aging in an oven at controlled temperature 60 ºC for periods of 5, 10, 15 and 25 weeks, which are equivalent to 5, 10, 15 and 25 of natural aging, respec
Quím. Nova. Publicado em: 2016-07
-
7. Crystallization Behavior of Amorphous Ti51.1Cu38.9Ni10.0 Alloy
A good glass former, Ti57.4Cu33.4Ni9.2, was selected using the topological instability criterion (lambda criterion) and the average electronegativity approach. The crystallization behavior and microstructural development of amorphous melt-spun ribbons of this new composition in response to heat treatment were investigated using a combination of differential
Mat. Res.. Publicado em: 2015-12
-
8. EVALUACIÓN TÉRMICA DEL CURADO DE ADHESIVOS BASE SBR USANDO PERÓXIDO DE DICUMILO
Curing is an important process in adhesive formulation, but scant reports on the study of the kinetics of curing in adhesive are currently available, particularly for formulations including styrene-butadiene copolymers. The focus of the present work was to thermodynamically quantify the curing reaction in pressure-sensitive adhesives (PSA) obtained from s
Quím. Nova. Publicado em: 2015-06
-
9. Estudo cinético não isotérmico da formação de titanato de alumínio em misturas de alumina com titânia
Titanato de alumínio (Al2TiO5) é um material de alta refratariedade com excelente resistância ao choque térmico. É, consequentemente, adequado para várias aplicações a altas temperaturas nas quais são requisitos ser isolante térmico e ter alta resistência ao choque térmico. Exemplos são como componentes de motores de combustão interna, revestim
Cerâmica. Publicado em: 2014-09
-
10. Metabolomics in the fight against malaria
Metabolomics uses high-resolution mass spectrometry to provide a chemical fingerprint of thousands of metabolites present in cells, tissues or body fluids. Such metabolic phenotyping has been successfully used to study various biologic processes and disease states. High-resolution metabolomics can shed new light on the intricacies of host-parasite interactio
Mem. Inst. Oswaldo Cruz. Publicado em: 2014-08
-
11. Materials produced from plant biomass: part III: degradation kinetics and hydrogen bonding in lignin
In this study Klason lignins from Eucalyptus grandis (LEUG) and Pinus taeda (LPIT) were characterized using Fourier transform infrared (FTIR) spectroscopy and thermogravimetry (TGA). The degradation kinetic parameters were determined by TGA using the Kissinger method. Thermogravimetric results showed that LPIT had higher thermal stability and also higher act
Mat. Res.. Publicado em: 16/07/2013
-
12. Determination of crystallization kinetics parameters of a Li1.5Al0.5Ge1.5(PO4)3 (LAGP) glass by differential scanning calorimetry
Crystallization kinetics parameters of a stoichiometric glass with the composition Li1.5Al0.5Ge1.5(PO4)3 were investigated by subjecting parallelepipedonal samples (3 × 3 × 1.5 mm) to heat treatment in a differential scanning calorimeter at different heating rates (3, 5, 8 and 10 °C/min). The data were analyzed using Ligero's and Kissinger's methods to de
Mat. Res.. Publicado em: 16/04/2013