Kinetic Modeling
Mostrando 1-12 de 184 artigos, teses e dissertações.
-
1. Steel desulfurization on RH degasser: physical and mathematical modeling
Abstract Due to the high-quality steel demand, especially for ultra-low Sulfur steel, RH desulfurization has been practiced. Based on this, mathematical and physical modeling have been applied to study steel desulfurization by reagent addition in the RH degasser vacuum chamber. The main result of cold modeling, using water and oil emulating steel and slag, r
REM - International Engineering Journal. Publicado em: 2022
-
2. Kinetic study and thermodynamic equilibrium modeling of the Co(II) and Mn(II) bioadsorption using the Rhodococcus opacus strain
Abstract Microbial biomass is considered a renewable and environmentally friendly resource. Thus, the research conducted a kinetic study and thermodynamic equilibrium modeling of the cobalt (Co) and manganese (Mn) bioadsorption process using the Rhodococcus opacus (RO) strain as a biosorbent. The inactive biomass subjected to 0.1 M NaOH pretreatment was brou
REM - International Engineering Journal. Publicado em: 2022
-
3. ADSORPTION OF ATRAZINE IN RICE HUSK BIOCHARS: A PHENOMENOLOGICAL MODEL APPLIED TO EQUILIBRIUM AND KINETIC STUDIES
ABSTRACT Atrazine is an herbicide used to remove weeds in agricultural crops; however, because it is considered toxic, options for removing it from the environment are needed. Adsorption on biochar is an efficient technique for removing organic contaminants. In this study, the atrazine adsorption capacities of two biochars (BCA400 and BCA700) produced from r
Engenharia Agrícola. Publicado em: 2022
-
4. PEACH PIT CHEMICALLY TREATED BIOMASS AS A BIOSORBENT FOR METFORMIN HYDROCHLORIDE REMOVAL: MODELING AND SORPTION MECHANISMS
ABSTRACT In this work, the potential of peach pit biosorption in the removal of the drug metformin hydrochloride from water is evaluated. Experiments are carried out in a closed batch system to evaluate the effect of the solution pH (2–10), temperature (25, 35 and 45 °C), stirring (100, 150 and 200 rpm) and chemical treatments. During the study, biosorben
Eng. Agríc.. Publicado em: 2021-04
-
5. Performance evaluation of GSA, SOS, ABC and ANN algorithms on linear and quadratic modelling of eggplant drying kinetic
Abstract In this study, kinetics of eggplant drying was modeled in the laboratory-scaled Food Drying Oven (FDO) with resistance heater was designed and manufactured. The temperature, energy consumption and drying time of FDO were recorded by keeping the temperature of at different temperatures as 40, 50 and 60 °C. These saved values were chosen as the input
Food Sci. Technol. Publicado em: 2020-09
-
6. Kinetic modeling and evaluation of free radical-scavenging behavior in oils: application to four tropical and subtropical fruits in a DPPH system
Abstract A kinetic model was developed to represent the radical-scavenging capacity (RSC) for the oxidation of oils. The model was developed using second-order rate constants (k2) to represent the RSC. The RSC of the oils can be compared by the k2 values indicating their scavenging capacity. Furthermore, the k2 values can be used to determine the decay kinet
Food Sci. Technol. Publicado em: 2020-06
-
7. Effect of drying temperature on color and desorption characteristics of oyster mushroom
Abstract Oyster mushroom (Pleurotus ostreatus) slices were dried in a hot air dryer at three temperatures (45, 55 and 65 °C). The sorption isotherm of dried samples in the water activity (aw) range of 0.556-0.970 was also determined at three temperature levels. Moisture desorption isotherms were obtained from changes in water activities of oyster mushroom s
Food Sci. Technol. Publicado em: 2020-03
-
8. Mathematical Modeling of the Transesterification Reaction by Finite Elements: Optimization of Kinetic Parameters Using the Simplex Sequential Method
The use of biodiesel as fuel has been presented as a viable alternative in the search for renewable energies. It can be produced from the transesterification reaction of vegetable oils with methanol in the presence of sodium or potassium hydroxide as catalysts. In the present research, the transesterification reaction of soybean oil was modeled considering t
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
9. KINETIC MODELING AND EXPERIMENTAL VALIDATION OF A PHOTOCATALYTIC FLUIDIZED BED REACTOR FOR n-HEXANE DEGRADATION
Abstract This work presents a modeling procedure for a tall photocatalytic fluidized bed photoreactor used for the photocatalytic oxidation of n-hexane on the anatase TiO2 surface. The modeling strategy split the reactor into two parts: a lower dense phase, with high solids concentration behaving as a bubbling bed treated as a continuous stirred tank reactor
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
10. Performance evaluation of GSA, SOS, ABC and ANN algorithms on linear and quadratic modelling of eggplant drying kinetic
Abstract In this study, kinetics of eggplant drying was modeled in the laboratory-scaled Food Drying Oven (FDO) with resistance heater was designed and manufactured. The temperature, energy consumption and drying time of FDO were recorded by keeping the temperature of at different temperatures as 40, 50 and 60 °C. These saved values were chosen as the input
Food Sci. Technol. Publicado em: 20/12/2019
-
11. Kinetic modeling and evaluation of free radical-scavenging behavior in oils: application to four tropical and subtropical fruits in a DPPH system
Abstract A kinetic model was developed to represent the radical-scavenging capacity (RSC) for the oxidation of oils. The model was developed using second-order rate constants (k2) to represent the RSC. The RSC of the oils can be compared by the k2 values indicating their scavenging capacity. Furthermore, the k2 values can be used to determine the decay kinet
Food Sci. Technol. Publicado em: 09/09/2019
-
12. Numerical Simulation of Atom-Transfer Radical Polymerization of tert-butyl Methacrylate
Block copolymers based on tert-butyl methacrylate (tBMA) have many uses, such as thermo‐responsive polymers, amphiphilic copolymers, and many applications in the medical field. Atom-transfer radical polymerization (ATRP) is the main technique to produce these controlled macromolecular architectures. This paper provides a simplified kinetic modeling and com
Mat. Res.. Publicado em: 02/09/2019