Kinetic Characterization
Mostrando 1-12 de 566 artigos, teses e dissertações.
-
1. PEACH PIT CHEMICALLY TREATED BIOMASS AS A BIOSORBENT FOR METFORMIN HYDROCHLORIDE REMOVAL: MODELING AND SORPTION MECHANISMS
ABSTRACT In this work, the potential of peach pit biosorption in the removal of the drug metformin hydrochloride from water is evaluated. Experiments are carried out in a closed batch system to evaluate the effect of the solution pH (2–10), temperature (25, 35 and 45 °C), stirring (100, 150 and 200 rpm) and chemical treatments. During the study, biosorben
Eng. Agríc.. Publicado em: 2021-04
-
2. Using static, kinetic and metal mobility procedures to evaluate possibilities of coal waste land disposal at Moatize Mine, Mozambique
Abstract Coal mine waste rocks produced during mining and beneficiation can affect the environment due to land degradation and acid mine drainage generation. However, proper characterization and treatment of mineral processing wastes creates options for safe disposal, enhancing the environmental performance. The aim of this study was to use static and kineti
REM, Int. Eng. J.. Publicado em: 2020-12
-
3. Kinetic characterization, thermal and pH inactivation study of peroxidase and pectin methylesterase from tomato (Solanum betaceum)
Abstract Peroxidase (POD) and pectin methylesterase (PME) from tomato were characterized, studied thermal stability, and analyzed the synergistic effect of temperature and pH. For POD, the optimal activity, using H2O2 as substrate and ABTS+• as the donor H+, was obtained at pH 3.5, and for PME, the optimal activity using pectin as substrate was obtained at
Food Sci. Technol. Publicado em: 2020-06
-
4. Aço de alta dureza para aplicação balística: propriedades mecânicas
RESUMO Blindagens balísticas são projetadas a resistir determinadas ameaças, que dependem da aplicação. Estas ameaças podem ser geradas por projéteis de armas de fogo ou estilhaços provenientes de explosões com diferentes energias cinéticas. Os materiais normalmente utilizados para este propósito são metálicos, não metálicos e compósitos, sen
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Design and characterization of nanocarriers loaded with Levofloxacin for enhanced antimicrobial activity; physicochemical properties, in vitro release and oral acute toxicity
Inorganic and carbon based nanomaterials are widely used against several diseases, such as cancer, autoimmune diseases as well as fungi and bacteria colonization. In this work, Santa Barbara Amorphous mesoporous silica (SBA), Halloysite Nanotubes (HNTs) and Multiwalled Carbon Nanotubes (CNTs) were loaded with fluoroquinolone Levofloxacin (LVF) to be applied
Braz. J. Pharm. Sci.. Publicado em: 12/08/2019
-
6. Avaliação do uso de argilas montmorilonitas modificadas na adsorção de nitrato em meio aquoso
RESUMO Este estudo investigou a eficiência da remoção de nitrato em meio aquoso usando adsorção em argilas montmorilonitas comerciais, comparativamente a uma resina aniônica comumente usada nessa operação. Algumas dessas argilas foram intercaladas como o íon hexadeciltrimetilamônio para avaliação. Áreas superficiais específicas, capacidades de
Eng. Sanit. Ambient.. Publicado em: 21/03/2019
-
7. Reduction of electric arc furnace dust pellets by mixture containing hydrogen
Abstract The large amount of dust generated in electric arc furnace aligned with its chemical composition makes this dust a potential source of iron in the direct reduction iron process. Thus, the aim of this research is to investigate the reduction of pellets produced with electric arc furnace dust using hydrogen as the reducing agent. The kinetic investiga
REM, Int. Eng. J.. Publicado em: 2019-03
-
8. Wastewater treatment using adsorption process in column for agricultural purposes
Resumo A água é um recurso essencial para vida, de extrema relevância para o ecossistema e encontra-se com várias problemáticas, entre elas a escassez. Por conta disso, o presente estudo foi desenvolvido a fim de propiciar a reutilização da água residuária da Estação de Tratamento de Água de Gramame para fins agrícolas. Assim, foi realizada a in
Rev. Ambient. Água. Publicado em: 04/02/2019
-
9. The interaction of a naturally occurring membranous collagen with high-saline dye solutions – mechanistic features from unusual multi-step biosorption
ABSTRACT It is known that wastewaters containing dyes are very difficult to treat, since many dyes are stable and recalcitrant molecules. In this way, sorption may suitable for effectively remove dyes in this specific application field. In this work, a first approach for using polymeric membranous collagen of fish scales for sorption of saline methylene blue
Matéria (Rio J.). Publicado em: 06/12/2018
-
10. Microstructural, thermochemistry and mechanical evaluation of self-reducing pellets using electric arc furnace (EAF) dust containing zinc for Waelz process
ABSTRACT The increment of recycling of steel using electric arc furnace and the tendency to coat of steel products with zinc, in order to prevent corrosion, has increased the proportion of galvanized scrap used worldwide in the recent years. Approximately 10 to 20 Kg/t of cast steel is generated in casting arcs. These collected dusts electric arc furnace (EA
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Penetration performance of axisymmetric U-shape-nose grooved projectile into aluminum target: Theoretical model and experiment
Abstract The penetration performance of projectiles is closely related to their nose shape as it influences the kinetic energy penetration of a rigid projectile. One new type of projectile, which is entitled U-shape-nose grooved projectile, is introduced in this study. A theoretical model, which describes the structural characterization of U-shape-nose groo
Lat. Am. j. solids struct.. Publicado em: 28/06/2018
-
12. Facile Preparation and Characterization of Nanostructured BiOI microspheres with certain adsorption-photocatalytic properties
A novel adsorbent based nanostructured bismuth oxyiodide (BiOI) microspheres combining the highly effective adsorption and green photocatalytic regeneration were fabricated by a facile and rapid low-temperature chemical bath method. The resultant products were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), energy dispersive spe
Mat. Res.. Publicado em: 12/04/2018