Kiln
Mostrando 1-12 de 37 artigos, teses e dissertações.
-
1. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
2. Programa de secagem para a madeira de seringueira (Hevea brasiliensis Muell. Arg.)
Resumo A seringueira (Hevea brasiliensis Muell. Arg.) tem sido cultivada para extração de látex e utilizada para produção de madeira ao fim do ciclo produtivo do látex. A secagem é uma etapa fundamental no processamento mecânico da madeira. No caso da madeira de seringueira, faz-se particularmente necessária a secagem artificial em estufa para a sua
Ciênc. Florest.. Publicado em: 02/12/2019
-
3. Microstructural, thermochemistry and mechanical evaluation of self-reducing pellets using electric arc furnace (EAF) dust containing zinc for Waelz process
ABSTRACT The increment of recycling of steel using electric arc furnace and the tendency to coat of steel products with zinc, in order to prevent corrosion, has increased the proportion of galvanized scrap used worldwide in the recent years. Approximately 10 to 20 Kg/t of cast steel is generated in casting arcs. These collected dusts electric arc furnace (EA
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Effect of Steaming on the Colorimetric Properties of Eucalyptus saligna Wood
ABSTRACT This study aimed to homogenize the color of Eucalyptus saligna wood by means of steaming and compare the resulting color with that of Cariniana legalis wood, a species of high commercial value. To this end, two steaming curves were tested: 100% relative humidity for 12 (T1) and 24 (T2) hours at 90 °C followed by drying in a pilot-scale conventiona
Floresta Ambient.. Publicado em: 19/03/2018
-
5. Dynamic Analysis of the Temperature and the Concentration Profiles of an Industrial Rotary Kiln Used in Clinker Production
ABSTRACT Cement is one of the most used building materials in the world. The process of cement production involves numerous and complex reactions that occur under different temperatures. Thus, there is great interest in the optimization of cement manufacturing. Clinker production is one of the main steps of cement production and it occurs inside the kiln. In
An. Acad. Bras. Ciênc.. Publicado em: 2017-12
-
6. DECHLORINATION OF ZINC OXIDE DUST DERIVED FROM ZINC LEACHING RESIDUE BY MICROWAVE ROASTING IN A ROTARY KILN
Abstract The dechlorination efficiency of zinc oxide dust using microwave roasting was investigated capitalizing on the different microwave absorbing capacities of the compounds such as chlorine, lead, and zinc oxide. The associated dechlorination reactions were discussed in detail and the effect of all the influencing parameters such as the air flow rate, s
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
7. Bacterial treatment of alkaline cement kiln dust using Bacillus halodurans strain KG1
Abstract This study was conducted to isolate an acid-producing, alkaliphilic bacterium to reduce the alkalinity of cement industry waste (cement kiln dust). Gram-positive isolate KG1 grew well at pH values of 6–12, temperatures of 28–50 °C, and NaCl concentrations of 0–16% and thus was further screened for its potential to reduce the pH of an alkaline
Braz. J. Microbiol.. Publicado em: 2016-03
-
8. Sistema forno-fornalha para produção de carvão vegetal / Kiln-furnace system for charcoal production
A qualidade do carvão vegetal depende da madeira utilizada na carbonização e da tecnologia de conversão. Embora nos últimos anos diversas pesquisas tenham sido desenvolvidas com o intuito de melhorar os índices de qualidade da madeira, grande parte da produção brasileira de carvão ainda ocorre em fornos com baixo rendimento gravimétrico e com emiss
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/02/2012
-
9. Redução na higroscopicidade e na movimentação dimensional da madeira de folhosas submetida a tratamentos térmicos / Reduction in hygroscopicity and dimensional movement of tropical hardwood lumber submitted to heat treatment
A madeira é um material de grande versatilidade, que atende a demanda de importantes setores da nossa economia. Além de ser uma matéria-prima natural e renovável, o consumo energético envolvido em sua manufatura é bem menor quando comparado com outros materiais de origem mineral. Porém, características intrínsecas da madeira resultam na sua capacida
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/10/2011
-
10. Metodologia de projeto de queimadores a jato para fornos de clínquer / Design methodology of jet burners for clinker kiln
Os queimadores a jato são caracterizados pela elevada quantidade de movimento na direção axial e elevada potência, estes queimadores são muito empregados em fornos rotativos, principalmente na indústria do cimento e da calcinação. O projeto de queimadores a jato é realizado usualmente aproximando o escoamento de ar primário no queimador por um mode
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/09/2011
-
11. Estudo do processo de calcinação como operação unitária adicional na pelotização de minérios de ferro com altos valores de PPC
The mineral resources from the Alegria complex, at the Mariana Ouro Preto/MG region, where Samarco´s deposits (Alegrias Norte, Centro and Sul) are located, present a significant parcel of composition related to low iron grade itabirites (below 50%) and high LOI contents (above 3.5%). The search for producing concentrates from these deposits using the curren
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/06/2011
-
12. Passagens / Passagens
Passages refers to transition, displacement, change, transmission and continuity. Perception of the body as a whole in the action of making; the movement and its resonances in connection with breathing and how this is transmitted in modeling the pieces. If passages here means relating differences, something that occurs somewhere between the being and the mat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/05/2011