Joint Simulation
Mostrando 1-12 de 46 artigos, teses e dissertações.
-
1. Low-Overhead Low-Complexity Carrier Phase Recovery Technique for Coherent Multi-Band OFDM-Based Superchannel Systems Enabled by Optical Frequency Combs
Abstract In this paper, we have designed a low-overhead low-complexity carrier phase tracking scheme for OFDM-based superchannel transmission system enabled by optical frequency combs. In this scheme, taking advantage of the broadband phase coherence provided by optical frequency combs among the OFDM-bands, the carrier phase retrieved from pilot-subcarriers
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
2. Joint calibration of a hydrological model and rating curve parameters for simulation of flash flood in urban areas
RESUMO Nos modelos chuva-vazão, a etapa de calibração geralmente exige tempo e grande quantidade de informação das vazões. No entanto, do ponto de vista prático, a informação usualmente disponível é o nível d’água medido, este, por sua vez, utilizado na construção das curvas-chave. Este artigo propõe uma calibração conjunta dos parâmetro
RBRH. Publicado em: 13/05/2019
-
3. Finite Element Simulation of Welding Distortion in Dissimilar Joint by Inherent Deformation Method
Abstract Fusion welding is widely used to join different parts to each other in various industries. However, welding-induced distortions sometimes cause problems such as misalignment during assembling and impose costs for their removal. Thus, it is imperative to predict and mitigate these problems to improve weldment quality and also reduce fabrication cost
Soldag. insp.. Publicado em: 2018-03
-
4. Numerical methodology for analyses of tubular KK multiplanar steel joints
Abstract Herein is presented a numerical methodology for a static resistance analysis of symmetrically loaded multiplanar KK joints in circular hollow steel sections. This methodology addresses factors related to the simulation of KK joints such as the material properties, the boundary conditions, mesh generation and refinement, incremental load steps and fa
REM, Int. Eng. J.. Publicado em: 2017-06
-
5. Tracking control of a planar five-link bipedal walking system with point contact, considering self-impact joint constraint by adaptive neural network method
AbstractIn order to achieve the practical characteristics of natural bipedal walking, a key feature is to realize "the straight knee state of walking" during stance and swing motions. Considering a straight knee necessitates that the shank link of each leg not to undergo the rotation angles which are greater than that of the thigh link. For this purpose, var
Lat. Am. j. solids struct.. Publicado em: 2015-06
-
6. Hybrid distributed Raman/EDFA amplifier with hybrid automatic gain control for reconfigurable WDM optical networks
Nowadays, optical amplifiers designs are induced by new requirements generated by optical networks. The introduction of WDM reconfigurable networks with increasing rate from 10-40 Gb/s to 100 Gb/s and beyond, demand new optical amplifiers development with improved gain spectral flatness and noise figure for all operational range of input powers and set-point
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-12
-
7. Nonlinear Characteristics of Revolute Joints with Clearance
ABSTRACT: The nonlinear contact characteristic of revolute joint with clearance can degrade the performance of deployable structure. In this article, tensile and compressive tests are adopted to investigate the accuracies of the simplest conformal model and nonconformal model for contact, which are used to calculate the revolute joint deformation. In order t
J. Aerosp. Technol. Manag.. Publicado em: 2013-09
-
8. The meat market: a dea international perspective and an econometric behavioral model for Brazil
We describe the relative participation of the Brazilian meat market (beef, pork and chicken) in total agribusiness exports and in total country exports. An analysis of the world meat market is carried out from the point of view of the values of consumption, production, exports and imports. A DEA (data envelopment analysis) approach is then used to generate c
Prod.. Publicado em: 27/08/2013
-
9. Estudo de distorções em soldagem com uso de técnicas numéricas e de otimização / Study of distortion in welding by using numerical and optimization techniques
The occurrence of distortions of structures is common during welding. Such distortions are more severe in the case of large structures, such as shipbuilding. Since distortions can increase manufacturing costs and time during shipbuilding, a thorough study of causes and consequences of distortions is necessary. Therefore, this work aims to study the distortio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/06/2012
-
10. Análise de sistemas complexos de drenagem urbana. / Urban drainage complex systems analysis.
This thesis aims to analyze urban drainage complex systems in order to define a technique for the design of detention ponds structures. In this study, Urban Drainage Complex Systems are those composed of several detention ponds, distributed in a network of channels formed by various reaches. This type of system is typical in megacities. The design of the res
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/04/2012
-
11. Generation of stationary Gaussian processes and extreme value distributions for high-cycle fatigue models - application to tidal stream Turbines
The operating environment of tidal stream turbines is random due to the variability of the sea flow (turbulence, wake, tide, streams, among others). This yields complex time-varying random loadings, making it necessary to deal with high cycle multiaxial fatigue when designing such structures. It is thus required to apprehend extreme value distributions of st
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
12. Simulações de chamas turbulentas de etanol com modelo de turbulência k-E. / Turbulent ethanol spray flame simulations with k-E turbulence model.
Diversos equipamentos industriais utilizam processos de combustão com sprays. As principais vantagens deste processo estão relacionadas ao aumento do controle da chama e à maior segurança na logística do combustível líquido. Atualmente, o interesse na utilização de bio-combustíveis como alternativa para a redução na emissão de dióxido de carbon
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/06/2011