Internal Roughness
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Electrolytic polishing of compacted graphite iron for revealing subsurface graphite of honed cylinders
ABSTRACT The superficial characteristics of honed surfaces are relevant for the tribological performance of cylinders of internal combustion engines (MCI). Recent studies found a correlation between the occurrence of the phenomenon called folded metal and the presence of graphite of cast irons. However, the honing process tends to overlap the graphite, such
Matéria (Rio J.). Publicado em: 20/05/2019
-
2. Evaluation of internal corrosion in a Brazilian iron ore slurry pipeline based on the characterization of scales and tubercles
Abstract The transport capacity of long-distance slurry pumping systems is directly related to the roughness of the pipe. In this context, corrosion plays an important role, especially when dealing with old pipes. Chemical, mineralogical and microstructural analyses were performed on materials removed from the internal surface of an iron ore slurry pipeline
REM, Int. Eng. J.. Publicado em: 2018-04
-
3. Observational Study of the Surface Layer at an Ocean-Land Transition Region
ABSTRACT: High-frequency measurements of wind, and temperature were made during the dry season of 2008 to study the development of an internal boundary layer at the main Brazilian space launching centre, Centro de Lançamento de Alcântara at Alcântara, Maranhão, Brazil. Turbulence measurements taken at the coast, in two different points 227 m apart show d
J. Aerosp. Technol. Manag.. Publicado em: 2013-12
-
4. Controle ativo acústico estrutural: projeto, simulação e análise de qualidade sonora / Active structural acoustic control: design, simulation and analysis of sound quality
This master thesis deals with the study of active noise and sound quality control systems in automotive applications, and the innovative assessment of their performance based on relevant psychoacoustic metrics in this area such as Loudness, Roughness and Tonality. A methodology for designing and implementing active control systems based on psychoacoustic met
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/08/2012
-
5. Análise de falhas em tubos sem costura de aço St52 utilizados em motores diesel / Failure analysis in seamless pipes of St52 steel used in Diesel Engines
The carbon steel with high manganese in accordance with Din 1.0580 (St52) seamless 8 x 3 mm diameter has been used into fuel injection system of the electronic diesel king with pressure up to 1300 bar. This tube presented short life on durability tests due to inner cracks created during rolling process. The tube produced in Brazil and used nowadays in was co
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/07/2011
-
6. The hydrophobicity and roughness of a nasoenteral tube surface influences the adhesion of a multi-drug resistant strain of Staphylococcus Aureus
In this study, we examined the physiochemical properties of nasoenteral feeding tubes made from two different types of polymer: silicone materials and polyurethane. The internal surfaces of the nasoenteral feeding tubes were analyzed for their hydrophobicity, roughness, microtopography, rupture-tension and ability to stretch. We also studied the adhesion of
Brazilian Journal of Microbiology. Publicado em: 2011-06
-
7. Effect of different finishing: polishing systems on the surface roughness of two heat-treated composite resins
The aim of this study was to compare the surface roughness achieved by different finishing/polishing systems on two composite resins for direct use after thermic treatment. The specimens (n = 40 per group (G); G1 = Filtek™ P60; G2 = Fill Magic®) were set up on a matrix of stainless steel with circular internal niches (Ø = 10.0 mm; h = 2.0 mm). Next, they
Materials Research. Publicado em: 06/05/2011
-
8. Plasma assisted parts' manufacturing: sintering and surface texturing - part II - influence of inter-cathode distance and gas pressure
The acquirements and potentiality universe of cleaning, heating and/or sputtering effects caused by plasma species bombardment phenomenon on the surface characteristics and finishing of manufactured parts treated in DC abnormal glow discharge opens a new research and development field, called here of Plasma Assisted Parts' Manufacturing (PAP'M). The adequate
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-06
-
9. Plasma assisted parts' manufacturing: sintering and surface texturing - part I - influence of sintering time and temperature
The acquirements and potentiality universe of cleaning, heating and/or sputtering effects caused by plasma species bombardment phenomenon on the surface characteristics and finishing of manufactured parts treated in DC abnormal glow discharge opens a new research and development field, called here of Plasma Assisted Parts' Manufacturing (PAP'M). The adequate
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-06
-
10. Application of the Minimum Quantity Lubrication (MQL) technique in the plunge cylindrical grinding operation
Precision cylindrical grinding is used extensively in the manufacture of precision components in the metal-mechanical industry in general. Modern CNC grinding machines have improved this process with respect to the positioning and rigidity of the machine-workpiece-tool system, allowing the production of high precision parts with low dimensional tolerances. B
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-03
-
11. Evaluation through the mgnetic inspection of the superficial condition of steel bearing rings DIN 100Cr6 after hard and dry turning. / Avaliação através da inspeção magnética da condição superficial de anéis de rolamento de aço DIN 100Cr6 após torneamento duro a seco.
The present work presents information for the manufacturing of ball bearings components with higher limits of resistance to fatigue, enabling a longer useful life and also the optimization of the production of the pieces, making the usual and final process of grinding unnecessary, which would result in a costs reduction. The motivations of this study are the
Publicado em: 2008
-
12. PROPRIEDADES ESTRUTURAIS, MECÂNICAS E TRIBOLÓGICAS DE FILMES DE TIB2 E TI-B-N DEPOSITADOS POR EROSÃO CATÓDICA / STRUCTURAL, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF TIB2 AND TI-B-N FILMS DEPOSITED BY REACTIVE DC MAGNETRON SPUTTERING
The main purpose of the present work was the study of the effects on the structural, mechanical and tribological properties of the incorporation of nitrogen in titanium diboride films (TiB2) grown by reactive dc magnetron sputtering. Ti-BN coatings with different N contents were deposited on Si (100) substrates from a TiB2 target. The sputtering was carried
Publicado em: 2007