Intermetallics Phases
Mostrando 1-11 de 11 artigos, teses e dissertações.
-
1. Efecto de la sustitución de V por Ti sobre las temperaturas de transformación de fase y el desajuste de red matriz/precipitado en la superaleación 76Fe-12Al-12V
ABSTRACT Fe-Al based alloys have a remarkable potential for high temperature structural applications, provided that the limitation of their low creep resistance is solved. Third element addition (Nb, Ti, Zr or Ta) has proven to per-form the task, at the expense of a low ductility. In previous works we have investigated ferritic alloys in the Fe-Al-V system w
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Study of Mechanical and Wear Behaviour of Hyper-Eutectic Al-Si Automotive Alloy Through Fe, Ni and Cr Addition
Effect of Fe, Ni and Cr addition on the wear behavior of hyper-eutectic Al-Si automotive alloy has been studied. Dry sliding wear tests have been conducted using pin-on-disc wear testing machine under normal loads of 20N and constant sliding speed of 0.64 ms-1. Influence of Fe addition to the base alloy increases the wear rate due to the formation of needle
Mat. Res.. Publicado em: 11/06/2018
-
3. Transient Unidirectional Solidification, Microstructure and Intermetallics in Sn-Ni Alloys
The present research work examines the microstructural arrangements formed during the transient solidification of eutectic Sn-0.2wt.%Ni and hypereutectic Sn-0.5wt.%Ni alloys. Also, it examines their respective correlations with solidification thermal parameters: eutectic growth rate (VE) and eutectic cooling rate (ṪE); length scales of matrix and eutectic
Mat. Res.. Publicado em: 12/04/2018
-
4. Microstructural evolution and mechanical properties of Sn-Bi-Cu ternary eutectic alloy produced by directional solidification
Sn-36Bi-22Cu (wt.%) ternary eutectic alloy was prepared using vacuum melting furnace and casting furnace. The samples were directionally solidified upwards solidification rate varying from 8.3 to 166 µm/s and at a constant temperature gradient (4.2 K/mm) in a Bridgman-type directional solidification furnace. The composition analysis of the phases and the in
Mat. Res.. Publicado em: 05/02/2018
-
5. Production of nanograined intermetallics using high-pressure torsion
Formation of intermetallics is generally feasible at high temperatures when the lattice diffusion is fast enough to form the ordered phases. This study shows that nanograined intermetallics are formed at a low temperature as 573 K in Al- 25 mol% Ni, Al- 50 mol.% Ni and Al- 50 mol% Ti powder mixtures through powder consolidation using high-pressure torsion (H
Mat. Res.. Publicado em: 23/04/2013
-
6. Determinação dos coeficientes de expansão térmica das fases Ta5Si3 e Cr5Si3 e a investigação da formação da fase (Hf,Ti)5Si3 por difratometria de raios X de alta resolução / Determination of the thermal expansion coefficients for the Ta5Si3 and Cr5Si3 phases and the investigation of (Hf, Ti)5Si3 phase formation by high resolution X-ray diffraction
The transition metal silicides have been investigated aiming high temperature applications. The thermal expansion is one of main properties for applications. The aim of this work was the evaluation of the thermal expansion coefficients for αTa5Si3 and Cr5Si3 phases and the investigation of (Hf, Ti)5Si3 phase formation. The Ta-Si and Cr-Si alloys were pr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/10/2009
-
7. Estudo do comportamento de corrosão dos intermetálicos presentes na liga AA 2024-T3, por meio de técnicas de microscopia associada a técnicas eletroquímicas / INVESTIGATION ON THE CORROSION BEHAVIOUR OF THE INTERMETALLICS IN THE AA 2024-T3 ALLOY BY MICROSCOPY ASSOCIATED TO ELECTROCHEMICAL TECHNIQUES.
The AA2024-T3 aluminium alloy is largely used in the aerospace industry. It has high mechanical properties due to the presence of alloying elements, mainly copper, that form finely distributed precipitates coherent with the matrix, during controlled aging treatment. However, during this process, large intermetallics (IMs) are also formed with composition and
Publicado em: 2008
-
8. Influencia do envelhecimento na microestrutura e propriedades mecanicas do aço inoxidavel ISO 5832-9 / The effect of aging on the microstructure and mechanical properties of ISO 5832-9 stainless steel
Neste trabalho foram estudados os efeitos de tratamentos térmicos de envelhecimento em temperaturas de 600 a 1200°C, por uma hora, e em temperaturas de 600 a 900oC, por 4 e 24 horas, após a deformação plástica a frio em 20%, por tração, na microestrutura e propriedades mecânicas do aço inoxidável austenítico ISO 5832-9, utilizado para a fabricaç
Publicado em: 2007
-
9. Precipitação de fase de laves no aço inoxidável superferrítico 28%Cr-4%Ni-2%Mo-Nb. / Laves phase precipitation in a 28%Cr-4%Ni-2%Mo-Nb superferritic stainless steel.
Estudos anteriores de precipitação, em outros aços superferríticos, constataram a ocorrência de precipitação das fases sigma, qui, de Laves e até de austenita, que no posterior resfriamento pode se transformar em martensita. O objetivo principal do presente trabalho foi estudar a precipitação de fases de Laves no aço inoxidável superferrítico X
Publicado em: 2006
-
10. Precipitation of intermetallics phases in the heat affected zone of low temperature (HAZLT) during duplex stainless steels multipasse welding. / Precipitação de fases intermetálicas na Zona Afetada pelo Calor de Temperatura Baixa (ZACTB) na soldagem multipasse de aços inoxidáveis duplex.
Os aços inoxidáveis duplex são ligas Cr-Fe-Ni-Mo, que possuem uma microestrutura balanceada austenita-ferrita, e com excelentes propriedades mecânicas e de resistência à corrosão. Estas características os fazem muito utilizados nas industrias química, petroquímica, de papel, alimentícia e farmacêutica. O processamento destes aços geralmente envo
Publicado em: 2001
-
11. Obtenção e caracterização de materiais compostos In Situ no sistema Fe-Al-Nb
Eutectic alloys formed by high melting point intermetallics phases, as in the case of the system formed with Fe, Al and Nb elements are promising material to be used as structural materials. This system presents eutectic structures formed by (FeAl)2Nb phase surrounded by (FeAl) solid solution. Depending on solidification conditions the eutectic structures ca
Publicado em: 1998