Inlays
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Nassarius foveolatus (Gastropoda, Nassariidae), a new record of an exotic species in Brazil
Abstract Exotic species are those that occur in an area beyond their natural limit and they are considered invasive when they cause harm to the economy, environment, or human health. In coastal environments, ballast water and inlays on the hull and other parts of vessels are the main ways of introducing invasive aquatic alien species. Nassarius foveolatus (D
Pap. Avulsos Zool.. Publicado em: 28/11/2019
-
2. Evaluation of adaptation of ceramic inlays using optical coherence tomography and replica technique
Abstract Optical coherence tomography (OCT) has generally been used as a nondestructive technique to evaluate integrities of composite restorations. We investigated marginal and internal adaptations of ceramic inlay restorations with OCT and compared them to results with the silicone replica technique. Round-shaped class I cavities were prepared on 16 human
Braz. oral res.. Publicado em: 01/02/2018
-
3. Comparison of the marginal adaptation of direct and indirect composite inlay restorations with optical coherence tomography
ABSTRACT Objective The purpose of the study was to use the photonic imaging modality of optical coherence tomography (OCT) to compare the marginal adaptation of composite inlays fabricated by direct and indirect techniques. Material and Methods Class II cavities were prepared on 34 extracted human molar teeth. The cavities were randomly divided into two
J. Appl. Oral Sci.. Publicado em: 2016-08
-
4. Effect of Ceramic Thickness and Composite Bases on Stress Distribution of Inlays - A Finite Element Analysis
O objetivo do estudo foi avaliar o efeito da profundidade da cavidade, da espessura da cerâmica e da presença de bases de resina, com os diferentes módulos de elasticidade na distribuição de tensões de von Mises em inlays cerâmicos. Modelos geométricos tridimensionais foram desenvolvidos com o software SolidWorks. As diferenças entre os modelos fora
Braz. Dent. J.. Publicado em: 2015-04
-
5. Effects of layering technique on the shade of resin overlays and the microhardness of dual cure resin cement
The purpose of this study was to assess the color of layered resin overlays and to test the early microhardness of dual cure resin cement (DCRC) light cured through the layered resin overlays. Resin overlays of 1.5 mm thickness were fabricated with the A3 shade of Z350 (Group 1L), the A3B and A3E shades of Supreme XT (Group 2L), and the A3, E3, and T1 shades
Braz. oral res.. Publicado em: 11/06/2014
-
6. Influence of surrounding wall thickness on the fatigue resistance of molars restored with ceramic inlay
The purpose of this study was to evaluate the influence of buccal and lingual wall thickness on the fatigue resistance of molars restored with CAD/CAM ceramic inlays. Forty human third molars were selected and divided into 4 groups, according to the remaining surrounding wall thickness chosen for inlay preparation (n = 10): G1, 2.0 mm; G2, 1.5 mm; G3, 1.0 mm
Braz. oral res.. Publicado em: 11/06/2014
-
7. Influência de cimentos resinosos autoadesivos na deflexão de cúspides e carga de fratura de pré-molares restaurados com inlays em resina composta
O objetivo desse estudo foi avaliar a influência de quatro cimentos resinosos (um convencional e três autoadesivos) na deflexão de cúspides, carga de fratura e tipos de fratura de pré-molares com acesso endodôntico e restaurados com inlays em resina composta. Setenta e dois primeiros pré-molares foram divididos aleatoriamente em seis grupos (n=12): G1
Publicado em: 2011
-
8. Influência das técnicas de selamento dentinário imediato na deflexão de cúspides, carga de fratura e microinfiltração de dentes restaurados com inlays em resina composta
O objetivo do estudo foi avaliar, in vitro, a influência de duas técnicas de selamento dentinário imediato (SDI) na deflexão de cúspides, carga de fratura e tipos de fratura de pré-molares restaurados com inlays em resina composta. Quarenta e oito primeiros pré-molares foram divididos aleatoriamente em quatro grupos (n=12): G1 (controle) - hígidos; G
Publicado em: 2011
-
9. Influência da destruição parcial de estrutura dental e material restaurador no comportamento biomecânico de pré-molar superior análise por elementos finitos
A necessidade de recobrimento de cúspide e a relação do preparo cavitário e material restaurador são fatores de importância na prática clínica e em estudos laboratoriais. O objetivo deste trabalho foi, por meio do método de elementos finitos 3D, analisar o comportamento biomecânico de pré-molares superiores variando o tipo de preparo e material re
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/08/2010
-
10. Avaliação clínica do uso de pinos de fibra de carbono na restauração de dentes tratados endodonticamente : um estudo retrospectivo
Os estudos clínicos de dentes desvitalizados e restaurados com pinos mostram resultados semelhantes no que diz respeito ao percentual de falhas ou insucessos, apesar de tantas variações técnicas, metodológicas e operatórias entre eles. Os insucessos são maiores quando se tratam de elementos dentais coronariamente destruídos ou comprometidos periapica
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/04/2010
-
11. Influence of post-cure treatments on hardness and marginal adaptation of composite resin inlay restorations: an in vitro study
OBJECTIVES: The purpose of this study was to evaluate the Vickers hardness number (VHN) and the in vitro marginal adaptation of inlay restorations of three hybrid composite resins (Filtek Z250, Opallis and Esthet-X) subjected to two post-cure treatments. MATERIAL AND METHODS: For the microhardness test, three different groups were prepared in accordance with
Journal of Applied Oral Science. Publicado em: 2009-12
-
12. Fracture strength of teeth restored with ceramic inlays and overlays
Este estudo avaliou a resistência à fratura de dentes restaurados com inlays e overlays de cerâmicas comparadas a dentes íntegros. Trinta pré-molares humanos íntegros foram divididos em 3 grupos: 1-Dentes sem preparo cavitário (controle), 2-Inlays e 3-Overlays. O preparo para as inlays apresentava uma cavidade de Classe II MOD tendo caixa oclusal com
Brazilian Dental Journal. Publicado em: 2009