Industrial Firing
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. Effects of sintering temperature on microstructure and properties of sanitaryware ceramic produced with waste material
Abstract This paper aims at exploring the possibility of using a great percentage of recycled materials into vitreous china (VC), thus, contributing to urban waste decrease while lowering the industry’s buying costs, previously optimized, for the sanitaryware production. The recycled blend was introduced in the ceramic slip, Sanitser VC, and used in three
Cerâmica. Publicado em: 2021-03
-
2. Evaluation of the Effect of the Incorporation of Blends of Fuel and Fluxing Wastes in Red Clay Ceramics
The clay samples endure the incorporation of industrial and urban wastes, which do not cause large variations in their properties if added in controlled quantities. Wastes can be classified as fuel, fluxing and property affecting wastes. The fuel wastes usually have a high amount of organic matter, that when heated cause exothermic reactions, releasing heat
Mat. Res.. Publicado em: 09/12/2019
-
3. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019
-
4. Thermal behavior (TG-DTA-TMA), sintering and properties of a kaolinitic clay from Buenos Aires Province, Argentina
Resumo As propriedades tecnológicas de um caulim local, considerado um potencial material industrial, foram correlacionadas com o comportamento térmico e processos de sinterização realizados por meio de uma série de análises termoquímicas. A caracterização química e mineralógica do material foi realizada, juntamente com uma simples caracterizaçã
Cerâmica. Publicado em: 06/06/2019
-
5. Síntese e caracterização das fases minerais C3S, C2S, C3A e C4AF para utilização em cimento tipo Portland
Resumo As principais fases contidas no cimento Portland são 3CaO.SiO2 (C3S), 2CaO.SiO2 (C2S), 3CaO.Al2O3 (C3A) e 4CaO.Al2O3.Fe2O3 (C4AF). No processo industrial estas apresentam incorporações de outros elementos que dependem das matérias-primas e dos combustíveis utilizados na queima. O uso das fases puras auxilia na compreensão dos fenômenos envolvid
Cerâmica. Publicado em: 2019-01
-
6. Use of Experimental Design to Evaluate the Effect of the Incorporation of Quartzite Residues in Ceramic Mass for Porcelain Tile Production
The potential of using quartzite residues in the composition of an industrial ceramic mass for porcelain tile production was investigated through experimental design. Chemical, physical and microstructural analyses were accomplished to understand how the incorporation of quartzite residues affects the material, before and after sintering. Central composite d
Mat. Res.. Publicado em: 29/10/2018
-
7. Characterization and Evaluation of Ceramic Properties with Spherical and Prismatic Samples of Clay Used in Red Ceramics
The Brazilian red ceramic industry monthly consumes about 10.3 million tons of clay, its main raw material. In most potteries, characterization of the clay is made empirically, which can result in roof tiles and blocks not according to standards. In this sense, this paper aims to characterize clays used in the manufacturing of red ceramic products in a facto
Mat. Res.. Publicado em: 09/11/2017
-
8. Analysis of Dimension Stone Waste Addition to the Clayey Mass Used in Roof Tile Production
Addition of dimension stone waste to clayey mass is an alternative to make the dimension stone sector more environmentally sustainable and to reduce the consumption of clayey raw material. Our aim is to study the technical feasibility of dimension stone waste addition to the clayey mass used in roof tile production. Samples of waste and clay were tested for
Mat. Res.. Publicado em: 2015-12
-
9. MODELING AND SIMULATION OF THE EFFECT OF THE FIRING CURVE ON THE LINEAR SHRINKAGE OF CERAMIC MATERIALS: LABORATORY SCALE AND INDUSTRIAL SCALE
AbstractSingle-cycle firing is currently the most widespread method used for the production of ceramic tile. The productivity is directly related to the performance of the constituent materials of the ceramic piece during thermal cycling. Numerical tools which allow the prediction of the material behavior may be of great help in the optimization of this stag
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
10. Desenvolvimento de células solares com metalização por serigrafia : influência do emissor N+
The main goal of the solar cell industry is to obtain high efficiency and low production cost. One line of action is to increase the efficiency of industrial solar cell . The goal of this dissertation is to develop n+pn+ solar cells in p-type Si-Cz wafer, solar grade, with metallization by screen printing and to evaluate the influence of the n+ emitter and P
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/12/2012
-
11. An analysis of quit and dismissal determinants between 1988 and 1999 using the bivariate probit model
Excessive labor turnover may be considered, to a great extent, an undesirable feature of a given economy. This follows from considerations such as underinvestment in human capital by firms. Understanding the determinants and the evolution of turnover in a particular labor market is therefore of paramount importance, including policy considerations. The prese
Publicado em: 01/09/2010
-
12. Microstructural characterization of ceramic floor tiles with the incorporation of wastes from ceramic tile industries
Ceramic floor tiles are widely used in buildings. In places where people are bare feet, the thermal sensation of cold or hot depends on the environmental conditions and material properties including its microstructure and crustiness surface. The introduction of the crustiness surface on the ceramic floor tiles interfere in the contact temperature and also it
Materials Research. Publicado em: 2010-09